Omega Products FPD1001B User Manual
POSITIVE-DISPLACEMENT
FLOWMETERS FOR VISCOUS FLUIDS
U 0 to 1000 cP Viscosity
Standard, 1,000,000 cP
Viscosity Rotor Available
1
⁄4" SS Model
on
U Compact, Durable, and
Serviceable On Site
U Extremely Accurate,
Even with Viscous Fluids
U Meter Design Minimizes
the Number of Wearable
Parts—Extending
Product Life
U Comes with Combined
Reed Switch and
Hall-Effect Sensor
U Handles Particle Sizes
to 0.127 mm (0.005")
U Factory Calibrated
U Easy to Install
U Choose from a Variety
of Output and
Display Options
U Certificate of Accuracy
Supplied with Meter
FPD1002B, pulse
output, shown
smaller than
actual size.
FPD1000D-TX,
remote 4 to 20 mA output
with programmable display
(loop powered), shown
smaller than actual size.
SPECIFICATIONS
Accuracy: ±1.0% of reading
Repeatability: ±0.03%
Fitting Type: NPT (female)
Dimensions: 65 L x 50 mm H
(2.58 x 1.97")
Sensor Options: Reed switch (2-wire
SPST reed switch NO, 3 watts rated,
150 Vdc max) and Hall-effect sensor
(25 mA NPN open collector)
Hall-Effect Sensor Power
Requirements: 4.5 to 24 Vdc
(4.6 to 9 mA)
FPD1000B Series
Output Options: Pulse
output,standard; optional 4 to 20 mA
transmitter (-A models)
Display: 6-Digit
Maximum Viscosity: 1000 cP,
standard; optional 1,000,000 cP
high-viscosity rotor (-HV) for 316 SS
and aluminum models
Strainer Size: 200 mesh [handles
particle sizes to 0.127 mm (0.005")]
Mounting: Shafts must be in
a horizontal plane.
The FPD1000B Series is one of
three compact meters in the oval
gear meter line. Choose from an
aluminum, 316 SS, or PPS
(polyphenylene sulfide resins) body.
The FPD1000B Series can handle
a wide range of fluid viscosities.
Wetted Materials
Housing Aluminum Stainless Steel PPS
Bearings for ¹⁄₈" units Sapphire Sapphire N/A
Bearings for ¹⁄₄" units Bronze Ceramic PPS
Shaft 316 SS 316 SS Hastelloy C
Rotor 316 SS 316 SS PPS
O-ring FKM (std) FKM (std) FKM (std)
F-77
Strain Relief: Hubble PG7
Electrical Connections:
Female
1
-20 UNF-2B
⁄
2
Cable: Belden 9363
Cable Length: 6 m (20')
Mounting: Wall, panel or pipe
Power Supply:
-TX Models: 2-wire, loop powered
-BAT Models: 9 Vdc lithium battery
Configuration: 2 Totals (1 cumulative,
1 batch) Rate (GAL, LTR, 2 user-defined)
Operating Ambient: -18 to 60°C
(0 to 140°F)
Materials:
Enclosure: Acetal, amorphous nylon
(display units only), silicone,
polyester
Seals: FKM
Fasteners: Stainless steel
Cable Insulation: PVC
Shipping Weight: 0.9 kg (2 lb)
Enclosure: NEMA 4X (IP66)
FPD1002B, pulse
output, shown smaller
than actual size.
Meter Size
1
" Aluminum 0.45 (1.0) 80 (176) 5 (75) 5855.4 0.2 to 21.5
⁄
8
1
" 316 SS* 0.91 (2.0) 120 (248) 55 (800) 5855.4 0.2 to 21.5
⁄
8
1
" Aluminum/PPS 0.45 (1.0) 80 (176) 5 (75) 3785.4 0.6 to 27.8
⁄
4
1
" 316 SS* 0.91 (2.0) 120 (248) 55 (800) 1514.2 1.7 to 55.5
⁄
4
1
" 316 SS High Flow 0.91 (2.0) 120 (248) 10 (150) 1514.2 1.7 to 55.5
⁄
4
1
" 316 SS (-HP) High Flow 0.91 (2.0) 120 (248) 551 (8000) 1514.2 1.7 to 55.5
⁄
4
1
" Aluminum/PPS High Flow 0.45 (1.0) 80 (176) 5 (75) 1514.2 1.7 to 55.5
⁄
4
Standard (without “-IP” option) models delivered prior to January 1, 2010 have a maximum pressure of 10 bar (150 psi).
*
To Order
Aluminum
Visit omega.com/fpd1001_1002_1003_1201_1202_1203 for Pricing and Details
Stainless Steel PPS Analog NPT Flowrate Flow Rate <5
Model No. Model No. Model No.
FPD1001B FPD1201B — — —
FPD1001B-D FPD1201B-D — Y —
FPD1001B-D-A FPD1201B-D-A — Y Y
FPD1001B-A FPD1201B-A — — Y
FPD1002B FPD1202B FPD1102B — —
FPD1002B-D FPD1202B-D FPD1102B-D Y —
FPD1002B-D-A FPD1202B-D-A FPD1102B-D-A Y Y
FPD1002B-A FPD1202B-A FPD1102B-A — Y
FPD1003B FPD1203B FPD1103B — —
FPD1003B-D FPD1203B-D FPD1103B-D5 Y —
FPD1003B-D-A FPD1203B-D-A FPD1103B-D-A Y Y
FPD1003B-A FPD1203B-A FPD1103B-A — Y
Weight Max Temp Max Pressure Typical Frequency
kg (lb) °C (°F) bar (psi) K Factors (PPG) Range (Hz)
Display
Output Size
1
0.13 to 13.20 0.53 to 13.20
⁄
8
1
0.13 to 13.20 0.53 to 13.20
⁄
8
1
0.13 to 13.20 0.53 to 13.20
⁄
8
1
0.13 to 13.20 0.53 to 13.20
⁄
8
1
0.53 to 26.40 1.32 to 26.40
⁄
4
1
0.53 to 26.40 1.32 to 26.40
⁄
4
1
0.53 to 26.40 1.32 to 26.40
⁄
4
1
0.53 to 26.40 1.32 to 26.40
⁄
4
1
4 to 132 6 to 132
⁄
4
1
4 to 132 6 to 132
⁄
4
1
4 to 132 6 to 132
⁄
4
1
4 to 132 6 to 132
⁄
4
GPH
Centipoise
F3
Accessories
Model Number Description
FPD1000-TX Remote 4 to 20 mA output—loop powered, 8.5 to 35 Vdc, 25 mA
FPD1000D-TX Remote 4 to 20 mA output with programmable display—loop powered
FPD1000D-BAT Remote battery-powered programmable display
FPW-15 15V power supply
DPF701 Frequency-input panel meter for rate or totalization, see page M-5 for complete details
FPD-BAT 9V lithium battery replacement
Comes complete with operator’s manual.
Aluminum models are not recommended for water applications.
For Perfluoroelastomer O-rings add suffix “-K” to model number, for additional cost.
For 1,000,000 cP high-viscosity rotor option add suffix “-HV” to model number, for additional cost (-HV option available on FPD1003B,
FPD1203B and FPD1103B series only).
Ordering Examples: FPD1102B, PPS flowmeter, 0.53 to 26.40 GPH.
FPD1203B, 316 SS flowmeter, 4 to 132 GPH.
F-78
Loading...