Page 1
PNEUMATIC IN-LINE FLOWMETERS
Capacities: 0.5 to 1000 SCFM of Air
FL6760A
Optional
U ±2% FS Accuracy
U ±1% Repeatability
U 69 bar (1000 psig)
Pressure Rating
U Calibrated to Read
in SCFM @ 7 bar
(100 psig)
This rugged direct-reading
flowmeter monitors air flow rates
to determine optimum performance,
flow regulator settings, or pneumatic
system performance. It is intended
for use in mobile or industrial
pneumatic systems as well as
air power-operated hand tool
systems.
These flowmeters feature
direct-reading scales for air flow and
are available in a wide variety
of flow ranges.
SPECIFICATIONS
Materials: Anodized aluminum
body with dichromate sealed anodized
aluminum cone and piston, 302 SS
spring, and polyphenylene sulfide/
ceramic magnet
Size/Shipping Weight:
1
⁄2"-0.57 kg (1.25 lb), 3⁄4"-0.9 kg (2 lb),
1
1
⁄4"-3.3 kg (7.3 lb)
Maximum Temperature:
116°C (240°F)
FL6715A shown
smaller than actual size.
Note: Calibrated with 140 SUS
(32 cSt) hydraulic oil.
To Order Visit omega.com/fl2700a_6700_7700_8700 for Pricing and Details
SCFM@100 FNPT Dimensions Length
Model No. psig, 70°F Port Size mm (inch) mm (inch)
FL6760A 5 to 50
FL6711A 10 to 100
FL6715A 15 to 150
FL7750A 5 to 50
FL7722A 25 to 250
FL8745A 40 to 400
FL8760A 60 to 600
FL8780A 80 to 800
FL8710A 100 to 1000
Comes complete with operator’s manual.
For units with BSPP threads add suffix “-BSPP” to model number, no additional cost.
For NIST traceable certificate add suffix “-NIST” to model number, for additional cost.
Ordering Examples: FL7722A, air flowmeter, 25 to 250 SCFM.
B-65
11
1
⁄
2
3
⁄
4
⁄
4
60.96 x 53.34 167.64
(2.4 x 2.1) (6.6)
73.66 x 63.5 182.88
2.9 x 2.5) (7.2)
(
119.38 x 104.14 309.88
(
4.7 x 4.1)
(12.2)
Loading...