IN-LINE FLOWMETERS
FOR ULTRA-PURE WATER
FL-500UP Series
Optional
†
U Fluid is Always in Sight
U Direct-Reading English
and Metric Scales
U Electro-Polished Version
of Standard 316 SS Shaft
and Spring Optionally
Available
U PVDF End Fittings
U Polysulfone Body
U Perfluoroelastomer Seals
U Easily Mounted in Any
Pipe Orientation
The FL-500UP is a specialized
meter for monitoring the flow rate
of ultra-pure water to tools, on
de-ionized water returns, and UPW
returns. Also available are
accessory switches for signaling
specific flowrates. Each switch kit
contains all the necessary hardware
for quick and trouble-free mounting.
Kits include a ring-shaped PTFEcoated ceramic magnet that fits
around the float in the flowmeter,
and a proximity switch mounted in a
rugged housing that easily clamps
to the body of the flowmeter. As the
changing flow causes the float to
move within the tube, the magnet
moves with it, and its magnetic field
trips the proximity switch at the
predetermined flow rate. An
adjustment screw allows for easy
flow rate adjustment. Add 2 switches
to indicate both high and low flow
rate limits.
Note: Switch activates over a 25% FS
band; above and below this band, the
relay deactivates.
Polysulfone should not be used in
direct sunlight or any other significant
sources of ultraviolet light.
Caution:
FL-505UP shown
smaller than actual size.
SPECIFICATIONS
Accuracy: ±5% FS
Pressure Drop: 4 psi at full scale flow
Maximum Pressure: 150 psig @
20°C (68°F)
Maximum Temperature:
65°C (150°F) @ 0 psig
Dimensions: 177.8 mm (7") long,
FL-505 through FL-515:
50.8 mm (2") Dia.
FL-530 through FL-550:
76.2 mm (3") Dia.
To Order Visit omega.com/fl500up for Pricing and Details
Female NPT
Model No. End Fittings GPM LPM
FL-505UP 1 0.5 to 5 2 to 20
FL-510UP 1 1 to 10 4 to 38
FL-515UP 1 1.5 to 15 6 to 55
FL-520UP 1.5 2 to 20 8 to 75
FL-530UP 1.5 3 to 30 11 to 110
FL-540UP 1.5 4 to 40 15 to 150
FL-550UP 1.5 5 to 50 20 to 200
Accessory Switch Kits (Field Installable)
Model No. For Sizes
FL-500-S1 FL-505, -510, -515
FL-500-S2 FL-520, -530, -540, -550
Switch ratings: 8 W, 100 Vdc/120 Vac [at 25°C (77°F)]
Comes complete with operator’s manual.
† For NIST traceable certificate add suffix “-NIST” to model number for additional cost.
For optional electro-polished 316 SS shaft and spring, add suffix “-EP” to model number for
additional cost.
Ordering Examples: FL-505UP, 1" flowmeter, 0.5 to 5 GPM (2 to 20 LPM) range.
FL-550UP, 1.5" flowmeter, 5 to 50 GPM (20 to 200 LPM) range.
Dual Scales
B-53