Omega Products FL-1701-V User Manual

ROTAMETERS FOR CORROSIVE APPLICATIONS

CAPACITIES: 0.011 to 8 GPH of Water, 0.13 to 44 SCFH of Air

B

FL-1700 Series

U ±10% Full Scale

Accuracy

U ±0.5% Full Scale

Repeatability

U Compact 65 mm

(2.6") Scale

U Direct Reading Scales

for Air and Water

U PVDF and Glass

Wetted Parts

U Machined End Fittings
U Side Plate Construction
U Non-Rotating

Seal Spindle

65

(2.6)

Scale

114

(4.5)

16

(0.63)

140

(5.5)

The OMEGA® FL-1700 and
FL-1800 glass tube rotameters
are similar in design to the FL-1300
and FL-1400 series units shown in
this section, except that these units
are designed for use with corrosive
fluids. Fluid contact is limited to
the glass tube and float, PVDF
end fittings, FKM O-Rings and
tube packing, and the PTFE float
stops. No stainless steel wetted
parts are employed.

These units are also available with
an optional integral needle control
valve (Note: the valve has 316 SS
wetted parts). Also available,
FL-1900 series rotameters offer
stainless steel construction with
a 65 mm (2.6") flow tube at an
economical price. Visit omega.com/

fl1900 for specifications.

SPECIFICATIONS

Scales: 65 mm (2.6"), direct reading

for air and water

Accuracy: ±10% full scale
Repeatability: ±0.5% full scale
Connections:
Metering Tubes: Borosilicate glass
Floats: Glass

1

⁄4 NPT, female horizontal

31.8 (1.25)
Square

Dimensions: mm (inch)

End Fittings, Seal Spindle: PVDF
Side Plates: Aluminum
Float Stops: PTFE
Tube Packing: FKM
O-Rings: FKM
Max Pressure: 10.34 bar (150 psig)

at 38°C (100°F)

FL-1705-V rotameter with optional

316 SS control valve shown actual size.

To Order Visit omega.com/fl1700 for Pricing and Details

Air Air Water Water
Model No. Range Model No. Range

FL-1701 0.01 to 0.13 SCFH FL-1711 0.001 to 0.011 GPH
FL-1702 0.02 to 0.15 SCFH FL-1712 0.001 to 0.013 GPH
FL-1703 0.09 to 0.95 SCFH FL-1713 0.011 to 0.11 GPH
FL-1704 0.38 to 3.8 SCFH FL-1714 0.065 to 0.65 GPH
FL-1705 1.3 to 13 SCFH FL-1715 0.24 to 2.4 GPH
FL-1706 4.4 to 44 SCFH FL-1716 0.8 to 8 GPH

Comes complete with operator’s manual.
For units with 316 SS control valve, add suffix “-V” to model number, for additional cost.

Ordering Examples: FL1703-V, air rotameter with 316 SS control valve.
FL-1715, water rotameter without valve.

B-22