Page 1
VERSATILE MULTI-LIQUID ULTRASONIC
FLOWMETERS
Enhanced Doppler Design
FD-7000
Standard
FD-7000 shown
smaller than
actual size.
Complete with portable
electronics, transducer
set, acoustic couplant (not
shown), mounting straps,
power cord and battery
(not shown)
U Non-Invasive Design,
Easy to Install, No
System Downtime
U Powered by
Rechargeable Internal
Battery (Included) or
AC Line Power
U Operates with
Semi-Clean Liquids,
Emulsions and Slurries
U Digital Flowrate Indicator
Plus 8-Digit Totalizer
U 4 to 20 mA
Output Standard
U Easy-to-Use Data
Entry Keypad
U NEMA-4X ABS
Waterproof Enclosure
U NIST Certificate Standard
Up to now, doppler
ultrasonic flowmeters have required
significant quantities of suspended
particles or gas bubbles to reflect
sound signals. Now, with the model
FD-7000 ultrasonic flowmeter, this is
no longer required. When the
FD-7000 is used to measure the
flow of liquids containing suspended
solids or bubbles, the transducers
are mounted on a straight run of
pipe in the same manner as other
ultrasonic meters. In applications
where insufficient “reflectors” exist
(a condition indicated by a low
reading on the FD-7000’s flow
analyzer bar graph), the transducers
are relocated to a point in the piping
where non-symmetrical hydraulic
turbulence will be present—ideally
just downstream of a 90° elbow.
The FD-7000’s unique digital
filtering system and signal
recognition circuitry transforms
the reflections from this nonsymmetrical, and not necessarily
linear, turbulence into a useable
and linear data format.
A backlit, 2 line by 20 character,
alphanumeric LCD offers simultaneous
flowrate and totalizer displays.
The FD-7000 is designed for ease
of use in the field. Only a few simple
keypad entries are required to configure the flowmeter for any given
pipe and flow conditions.
The encapsulated, submersible
design of the transducer sensor
head allows it to be easily mounted
to the pipe surface with the coupling
compound and elastic bands that
are supplied with the unit.
A 6 m (20') retractable cable for
connection to the transmitter/
indicator unit is supplied as as
integral part of the sensor. The
FD-7000 sensor is utilized on pipes
that range in internal diameter from
25 mm to 1.5 m (1 to 60").
Flowrates can be measured in smaller
pipes from 6 to 25 mm (
diameter with use of the small pipe
sensor, model FD-7000-S1.
1
⁄4 to 1") in
E-13
Page 2
E
SPECIFICATIONS
System Accuracy: ±2% of FS
Velocity Range: 0.15 to 6.2 MPS
(0.5 to 20 FPS)
Measuring Units: FPS, GPM, MGD
Linearity: ±0.2% FS
Repeatability: 0.4% of FS
Flow Rate Display: 6-digit LCD
FD-7000-STD,
replacement sensor
for line sizes
25 to 1524 mm
(1 to 60") shown
smaller than actual size.
Required pipe
mounting
configuration.
Non-penetrating—
easy installation.
Totalizer Display: 6-digit LCD
(resettable)
Outputs: 4 to 20 mA into 600 Ω
max., isolated
Power Requirements: 115 Vac ±10%,
50/60 Hz, 20 VA max. (standard);
230 Vac 50/60 Hz (optional).
Internal gel cell battery provides 8 hrs.
of continuous operation
Liquid Requirements: Full-pipe,
low-viscosity (water-like) liquid
Transmitter/Indicator Operating
Temperature: -30 to 70°C (-22 to 158°F)
Sensor Operating Temperature:
-40 to 121°C (-40 to 250°F)
Dimensions:
432 L x 279 W x 203 mm H
(17 x 11 x 8")
Weight: 10 kg (22 lb)
Enclosure: NEMA-4X (IP65)
To Order Visit omega.com/fd7000 for Pricing and Details
Model No. Description
FD-7000 Ultrasonic flowmeter, FPS, GPM, MGD (English) units
FD-7000-M Ultrasonic flowmeter, MPS, LPM, m
Accessories
Model No. Description
FD-7000-STD Replacement sensor for 25 mm to 1.5 m (1 to 60") pipes
FD-7000-S1 Sensors for 6 to 25 mm (¹⁄₄ to 1") pipe
FD-7000-HT High temperature sensor for 25 mm to 1.5 m (1 to 60") pipe,
FD-7000-BATT Replacement gel cell battery
FD-7000-Charger Replacement charging cord (USA)
FD-7000-Charger-G Replacement charging cord (Germany)
FD-7000-Charger-UK
FD-7000-EXT Extension cable, 2 conductors, 20 AWG, unshielded,
For 230 Vac version add suffix “-230” to model number, no additional cost.
Comes complete with operator’s manual, 2 transducers, couplant, power cord, NIST certificate
and gel cell battery.
Ordering Example: FD-7000, ultrasonic flowmeter.
204°C (400°F)
Replacement charging cord (UK)
6 m (20')
E-14
3/hr (metric) units
Loading...