Omega Products EZIO-4DCI4DCON User Manual
E Z
Re-Order from
omegamation.com
Omegamation
TM
1-888-55-OMEGA
1-888-55-66342
1-888-55-66342
DC Power
Supply Specs
DC Input Specs
DC Output
Specs
Voltage Range
Number of Inputs 4 (sink/source)
Input Voltage Range 10-28 VDC
Peak Voltage 40 VDC
Input Current
Maximum Input Current 5 mA @ 28 VDC
Input Impedance 5.6k @ 10-28 VDC
ON Voltage Level > 10 VDC
OFF Voltage Level < 2 VDC
Min. ON Current 1.5 mA
Min. OFF Current 0.2 mA
OFF to ON Response 2-4 ms, typical 3 ms
ON to OFF Response 2-4 ms, typical 3 ms
Status Indicators
Commons 1 point
Fuse No Fuse
Base Power Required (3.3V)
Optical Isolation 2500 Volt
Wires
Number of Outputs 4 sinking
Peak Voltage 50.0 VDC
Maximum Steady State
Output Current
Maximum Leakage Current
ON Voltage Drop 1.5 VDC @ 0.5A
Maximum Inrush Current 1.0A for 10ms
OFF to ON Response < 2µs
ON to OFF Response <10µs
Status Indicators
+V Terminals & Commons One V+, 1 Common
Short Circuit Protection
Base Power Required (3.3V) 20mA, all outputs on
Optical Isolation 2500 Volt
Wires
TM
I/O
Module Specications
4 pt. 24VDC In/4 pt. 24VDC
1.92 mA @ 12 VDC
4.0 mA @ 24 VDC
Red LED for each
output
Typical 8 mA (all
inputs on)
1 of 14 AWG, 2 of 18
AWG, 4 of 22 AWG
0.5A per output,
1.4A max per module
@ 50°C
100µA @ 50 VDC @
50°C
Red LED for each
output
1.4 Amp per module,
turns off outputs upon
short circuit detection
1 of 14 AWG, 2 of 18
AWG, 4 of 22 AWG
Out Sinking Module
EZIO-4DCI4DCON
Terminal Block
300 Volt/10 Amp/
14AWG UL Rating
Pinout Information
Pin No. EZIO-4DCI4DCON
1 Input(1)
2 Input(2)
3 Input(3)
4 Input(4)
5 COM
6 Output(1)
7 Output(2)
8 Output(3)
9 Output(4)
10 GND
11 Customer_Supply( +VS )
(10-28 VDC)
Loading...