Omega Products EZ-DAQ-SOFT User Manual

EASIEST TO PROGRAM,
A-1
PLC TOUCHPANELS
CONNECT & OPERATE
Easy to Learn, Intuitive SoftwareEasy to Operate 3D ObjectsEasy to Connect to Most PLCsEasy to Maintain HardwareEasy on the Budget8 Display Sizes to Choose FromExclusive Online Programming, No DowntimeNEMA 4x Indoor, FDA Compliant
Efficient 3D Graphical Objects4000 Symbols to Choose FromMultiple LanguagesEasy to Understand Trend GraphsEasy Insightful PID FaceplatesMulti-State IndicatorsAlarm ReportingRecipe Button w/ On-Screen EditScale Objects w/o DistortionPop Up Thumbwheel EntryPop Up Alpha-Numeric Keypad8 Levels of Password SecurityDynamic/Multi-state BitmapsBitmap Buttons
Serial Drivers
Allen-Bradley DF1 Half and Full
Duplex (PLC-5, SLC 500, MicroLogix 1000, 1200 and 1500) DH485/AIC/AIC+ for MicroLogix 1000, 1200, 1500, SLC500, 5/01, /02, /03
Aromat Mewtocol COM
Control Techniques - Unidrive 2-wire,
4-wire (binary)
CTC Binary
GE Fanuc SNPX (90/30, 90/70)
Idec Computer Link
Omron Host Link (C200 and C500)
All Mitsubishi FX Series
Modicon MODBUS
®
RTU
Siemens S7 MPI Adapter series
Square D Symax
Texas Instruments - TI5x5 Series
Ethernet Drivers
Allen-Bradley Ethernet I/P for ControlLogix
Allen-Bradley DF1 over Ethernet for
MicroLogix & SLC 500 PLC's
GE SRTP over Ethernet
Modbus TCP/IP Ethernet
Hardware Drivers
DH+ / Remote I/O
Modbus Plus
Profibus
DeviceNet
TESTED AND PROVEN BY 20,000+ ENGINEERS
EZ Series Touchpanels
are Easy to Operate
EZ Series Touchpanels
have Drivers for Over
90% of PLCs/Networks
EZ Series Touchpanels
have Enhanced Data
Acquisition & Ethernet
Connectivity Options
EZDaq (EZ’s Data Acquisition $99 Utility Option) uses the RS232 programming port to a PC or Ethernet for communicating with multiple panels allowing data acquisition in a PC remote from the panel. The user specifies tags and schedules for data acquisition. Data files are organized in a convenient, user selectable format (tab delimited or CSV) and can be opened in Excel or in any text editor.
EZDaq Software installed on your PC can select any tag you want to monitor on the PLC / Panel, watch the data coming in real time (as compared to receiving only a snap­shot when certain event occurs) and plot it into an Excel sheet automatically. Time intervals on event triggers can be selected from a wide range of options.
EZ Series
PLC Touchpanels
Start at
$
399
A-2
ONLY ASSUMPTIONS:
Familiar with Windows
®
-Based Environments
Good Understanding of Your PLC Memory’s Address Formats
Click on “Objects” on the main menu bar Select the object you wish to create. In this example, we’ll click on
“Switches”. You may also select an object from the
tool bar below the main menu
 
PROGRAM THIS SCREEN IN LESS THAN 10 MINUTES
STEP 1 - Select an Object
Click the style of switch you wish to use.
Select “Label Text”. This will allow you to name and customize the object.
Select or create a PLC bit address tag that the “Switch” will activate.
If you need password protection, click on the “Protection” tab at the top of the dialog box.
If you wish to keep this object invisible until a PLC tag is triggered, click on the “Visibilty/Details” tab.
A
B
C
D
E
STEP 2 - Fill in the Dialog Box
Click on the screen and stretch the object to your desired size.
If you want to edit the object again, simply double click to bring up the dialog box.
You can even “Simulate” the object to see how it interacts in real time.
STEP 3 - Place the Object
EZ Series Touchpanels have Earned their Name!
We named them “EZ Series” for a reason! We made an easy to use, simple operator interface that will save you a lot of engineering hours and design time due to its simplicity and ease of use. You don’t need prior programming knowledge to design a screen. You do not need to attend any classes to learn how to program them.
It is Intuitive, it is Simple!
A
B
C
D
E
Programming
Software
$
108
Loading...
+ 3 hidden pages