Omega Products ETIN-116E-18 User Manual
High Temperature Thermocouple Assemblies
Grounded Exposed Ungrounded
With Molded Transition Junctions 1⁄16 to 1⁄4" Diameters
Standard Dimensions
Shown actual size.
ANSI
color
code
shown
To order
IEC color
code visit
omega.com
U 12, 18, and 24" Lengths Standard
U 304, 310, 316, 321 SS, Inconel or
Super OMEGACLAD® XL Sheath
U Molded Junction Rated to 260°C (500°F)
U Color-Coded to Calibration
U 40" Teflon
®
Coated Lead Wires
U Stripped Lead Wire Termination—
Connector Options Available
Junction
Types
To Order
Thermocouple Sheath Model No. Model No. Model No.
Alloy Dia. (in) 12" Length 18" Length 24"
IRON-
CONSTANTAN
Inconel
Sheath
IRON CONSTANTAN
304 SS
Sheath
CHROMEGA® ALOMEGA®
Inconel
Sheath
CHROMEGA® ALOMEGA®
304 SS
Sheath
CHROMEGA® ALOMEGA®
Super OMEGACLAD
Sheath
OMEGA-P®- ††
OMEGA-N®
Super OMEGACLAD
Sheath
CHROMEGA® CONSTANTAN
Inconel
Sheath
CHROMEGA® CONSTANTAN
304 SS
Sheath
COPPER CONSTANTAN
Inconel
Sheath
COPPER CONSTANTAN
304 SS
Sheath
* Specify junction type: “E” (exposed), “G” (grounded) or “U” (ungrounded). †Other lengths are available, consult Sales Department. ††Supplied
with stainless steel transition joints. To order with 310, 316 or 321 SS sheath, change “SS” in model number to “310SS”, “316SS” or “321SS”
respectively; no additional cost. Consult Sales for lengths between 2 to 12", or for lengths over 24". Type N Inconel sheathing is available,
contact Sales for model numbers. Ordering Examples: JT321SS-116U-24, Type J molded transition probe, 1⁄16" Dia., 321 SS sheath,
ungrounded junction, 24" L. KTSS-18G-12, molded transition junction probe, Type K, 1⁄8" OD, 304 SS sheath, grounded junction, 12" L.
Exposed
Grounded
Visit omega.com/jtin for Pricing and Details
®
XL
®
XL
†
12"
Color coded to calibration
Thermocouple molded assemblies with transition joints of
molded LCP high temperature liquid crystal polymer provide
an economical yet durable thermocouple probe for a variety
of sensing applications. The measuring tip is limited only
by thermocouple type and sheath material. Stainless steel
Ungrounded
sheaths have a maximum temperature of 900°C (1650°F)
with Inconel 600 rated to 1150°C (2100°F). The calibration
letter code is an integral part of the mold.
Length
1
⁄16" JTIN-116(*)-12 JTIN-116(*)-18 JTIN-116(*)-24
1
⁄8" JTIN-18(*)-12 JTIN-18(*)-18 JTIN-18(*)-24
3
⁄16" JTIN-316(*)-12 JTIN-316(*)-18 JTIN-316(*)-24
1
⁄4" JTIN-14(*)-12 JTIN-14(*)-18 JTIN-14(*)-24
1
⁄16" JTSS-116(*)-12 JTSS-116(*)-18 JTSS-116(*)-24
1
⁄8" JTSS-18(*)-12 JTSS-18(*)-18 JTSS-18(*)-24
3
⁄16" JTSS-316(*)-12 JTSS-316(*)-18 JTSS-316(*)-24
1
⁄4" JTSS-14(*)-12 JTSS-14(*)-18 JTSS-14(*)-24
1
⁄16" KTIN-116(*)-12 KTIN-116(*)-18 KTIN-116(*)-24
1
⁄8" KTIN-18(*)-12 KTIN-18(*)-18 KTIN-18(*)-24
3
⁄16" KTIN-316(*)-12 KTIN-316(*)-18 KTIN-316(*)-24
1
⁄4" KTIN-14(*)-12 KTIN-14(*)-18 KTIN-14(*)-24
1
⁄16" KTSS-116(*)-12 KTSS-116(*)-18 KTSS-116(*)-24
1
⁄8" KTSS-18(*)-12 KTSS-18(*)-18 KTSS-18(*)-24
3
⁄16" KTSS-316(*)-12 KTSS-316(*)-18 KTSS-316(*)-24
1
⁄4" KTSS-14(*)-12 KTSS-14(*)-18 KTSS-14(*)-24
1
⁄16" KTXL-116(*)-12 KTXL-116(*)-18 KTXL-116(*)-24
1
⁄8" KTXL-18(*)-12 KTXL-18(*)-18 KTXL-18(*)-24
3
⁄16" KTXL-316(*)-12 KTXL-316(*)-18 KTXL-316(*)-24
1
⁄4" KTXL-14(*)-12 KTXL-14(*)-18 KTXL-14(*)-24
1
⁄16" NTXL-116(*)-12 NTXL-116(*)-18 NTXL-116(*)-24
1
⁄8" NTXL-18(*)-12 NTXL-18(*)-18 NTXL-18(*)-24
3
⁄16" NTXL-316(*)-12 NTXL-316(*)-18 NTXL-316(*)-24
1
⁄4" NTXL-14(*)-12 NTXL-14(*)-18 NTXL-14(*)-24
1
⁄16" ETIN-116(*)-12 ETIN-116(*)-18 ETIN-116(*)-24
1
⁄8" ETIN-18(*)-12 ETIN-18(*)-18 ETIN-18(*)-24
3
⁄16" ETIN-316(*)-12 ETIN-316(*)-18 ETIN-316(*)-24
1
⁄4" ETIN-14(*)-12 ETIN-14(*)-18 ETIN-14(*)-24
1
⁄16" ETSS-116(*)-12 ETSS-116(*)-18 ETSS-116(*)-24
1
⁄8" ETSS-18(*)-12 ETSS-18(*)-18 ETSS-18(*)-24
3
⁄16" ETSS-316(*)-12 ETSS-316(*)-18 ETSS-316(*)-24
1
⁄4" ETSS-14(*)-12 ETSS-14(*)-18 ETSS-14(*)-24
1
⁄16" TTIN-116(*)-12 TTIN-116(*)-18 TTIN-116(*)-24
1
⁄8" TTIN-18(*)-12 TTIN-18(*)-18 TTIN-18(*)-24
3
⁄16" TTIN-316(*)-12 TTIN-316(*)-18 TTIN-316(*)-24
1
⁄4" TTIN-14(*)-12 TTIN-14(*)-18 TTIN-14(*)-24
1
⁄16" TTSS-116(*)-12 TTSS-116(*)-18 TTSS-116(*)-24
1
⁄8" TTSS-18(*)-12 TTSS-18(*)-18 TTSS-18(*)-24
3
⁄16" TTSS-316(*)-12 TTSS-316(*)-18 TTSS-316(*)-24
1
⁄4" TTSS-14(*)-12 TTSS-14(*)-18 TTSS-14(*)-24
A-83
High Temperature Thermocouple Assemblies
Grounded Exposed Ungrounded
With Molded Transition Junctions 1.5 to 6 mm Diameters
Metric Dimensions
Shown actual size.
ANSI
color
code
shown
To order
IEC color
code visit
omega.com
A
U 300, 450 and 600 mm Lengths Standard
U 304, 310, 316, 321 SS, Inconel or
Super OMEGACLAD® XL Sheath
U Molded Junction Rated to 260°C (500°F)
U Color-Coded to Calibration
U 1 m Teflon® Coated Lead Wires
U Stripped Lead Wire Termination—
Connector Options Available
Junction
Types
To Order
Thermocouple Sheath Model No. Model No. Model No.
Alloy Dia. (mm) 300 mm Length 450 mm Length 600 mm
IRON- 1.5 JTIN-M15(*)-300 JTIN-M15(*)-450 JTIN-M15(*)-600
CONSTANTAN 3.0 JTIN-M30(*)-300 JTIN-M30(*)-450 JTIN-M30(*)-600
Inconel 4.5 JTIN-M45(*)-300 JTIN-M45(*)-450 JTIN-M45(*)-600
Sheath 6.0 JTIN-M60(*)-300 JTIN-M60(*)-450 JTIN-M60(*)-600
IRON- 1.5 JTSS-M15(*)-300 JTSS-M15(*)-450 JTSS-M15(*)-600
CONSTANTAN 3.0 JTSS-M30(*)-300 JTSS-M30(*)-450 JTSS-M30(*)-600
304 SS 4.5 JTSS-M45(*)-300 JTSS-M45(*)-450 JTSS-M45(*)-600
Sheath 6.0 JTSS-M60(*)-300 JTSS-M60(*)-450 JTSS-M60(*)-600
CHROMEGA®- 1.5 KTIN-M15(*)-300 KTIN-M15(*)-450 KTIN-M15(*)-600
ALOMEGA® 3.0 KTIN-M30(*)-300 KTIN-M30(*)-450 KTIN-M30(*)-600
Inconel 4.5 KTIN-M45(*)-300 KTIN-M45(*)-450 KTIN-M45(*)-600
Sheath 6.0 KTIN-M45(*)-300 KTIN-M45(*)-450 KTIN-M45(*)-600
CHROMEGA®- 1.5 KTSS-M15(*)-300 KTSS-M15(*)-450 KTSS-M15(*)-600
ALOMEGA® 3.0 KTSS-M30(*)-300 KTSS-M30(*)-450 KTSS-M30(*)-600
304 SS 4.5 KTSS-M45(*)-300 KTSS-M45(*)-450 KTSS-M45(*)-600
Sheath 6.0 KTSS-M60(*)-300 KTSS-M60(*)-450 KTSS-M60(*)-600
CHROMEGA®- 1.5 KTXL-M15(*)-300 KTXL-M15(*)-450 KTXL-M15(*)-600
ALOMEGA® 3.0 KTXL-M30(*)-300 KTXL-M30(*)-450 KTXL-M30(*)-600
Super OMEGACLAD
Sheath 6.0 KTXL-M60(*)-300 KTXL-M60(*)-450 KTXL-M60(*)-600
OMEGA-P®- †† 1.5 NTXL-M15(*)-300 NTXL-M15(*)-450 NTXL-M15(*)-600
OMEGA-N® 3.0 NTXL-M30(*)-300 NTXL-M30(*)-450 NTXL-M30(*)-600
Super OMEGACLAD
Sheath 6.0 NTXL-M60(*)-300 NTXL-M60(*)-450 NTXL-M60(*)-600
CHROMEGA®- 1.5 ETIN-M15(*)-300 ETIN-M15(*)-450 ETIN-M15(*)-600
CONSTANTAN 3.0 ETIN-M30(*)-300 ETIN-M30(*)-450 ETIN-M30(*)-600
Inconel 4.5 ETIN-M45(*)-300 ETIN-M45(*)-450 ETIN-M45(*)-600
Sheath 6.0 ETIN-M60(*)-300 ETIN-M60(*)-450 ETIN-M60(*)-600
CHROMEGA®- 1.5 ETSS-M15(*)-300 ETSS-M15(*)-450 ETSS-M15(*)-600
CONSTANTAN 3.0 ETSS-M30(*)-300 ETSS-M30(*)-450 ETSS-M30(*)-600
304 SS 4.5 ETSS-M45(*)-300 ETSS-M45(*)-450 ETSS-M45(*)-600
Sheath 6.0 ETSS-M60(*)-300 ETSS-M60(*)-450 ETSS-M60(*)-600
COPPER- 1.5 TTIN-M15(*)-300 TTIN-M15(*)-450 TTIN-M15(*)-600
CONSTANTAN 3.0 TTIN-M30(*)-300 TTIN-M30(*)-450 TTIN-M30(*)-600
Inconel 4.5 TTIN-M45(*)-300 TTIN-M45(*)-450 TTIN-M45(*)-600
Sheath 6.0 TTIN-M60(*)-300 TTIN-M60(*)-450 TTIN-M60(*)-600
COPPER- 1.5 TTSS-M15(*)-300 TTSS-M15(*)-450 TTSS-M15(*)-600
CONSTANTAN 3.0 TTSS-M30(*)-300 TTSS-M30(*)-450 TTSS-M30(*)-600
304 SS 4.5 TTSS-M45(*)-300 TTSS-M45(*)-450 TTSS-M45(*)-600
Sheath 6.0 TTSS-M60(*)-300 TTSS-M60(*)-450 TTSS-M60(*)-600
* Specify junction type: “E” (exposed), “G” (grounded) or “U” (ungrounded). †Other lengths are available, consult Sales Department. ††Supplied
with stainless steel transition joints. To order with 310, 316 or 321 SS sheath, change “SS” in model number to “310SS”, “316SS” or “321SS”
respectively; no additional cost. Consult Sales for lengths between 50 and 300 mm, or for lengths over 600 mm. Type N Inconel sheathing is
available, contact Sales for model numbers. Ordering Examples: JT321SS-M15U-600, Type J molded transition probe, 1.5 mm Dia., 321 SS
sheath, ungrounded junction, 600 mm L. KTSS-18G-12, molded transition junction probe, Type K, 6.0 mm OD, 304 SS sheath, grounded
junction, 300 mm L.
Exposed
Grounded
Visit omega.com/jtin for Pricing and Details
®
XL
4.5 KTXL-M45(*)-300 KTXL-M45(*)-450 KTXL-M45(*)-600
®
XL
4.5 NTXL-M45(*)-300 NTXL-M45(*)-450 NTXL-M45(*)-600
Ungrounded
†
300 mm
Color coded to calibration
Thermocouple molded assemblies with transition joints of
molded LCP high temperature liquid crystal polymer provide
an economical yet durable thermocouple probe for a variety
of sensing applications. The measuring tip is limited only
by thermocouple type and sheath material. Stainless steel
sheaths have a maximum temperature of 900°C (1650°F)
with Inconel 600 rated to 1150°C (2100°F). The calibration
letter code is an integral part of the mold.
Length
A-84
Loading...