Omega Products ELC-AN02NANN User Manual

Download

ELC PROGRAMMABLE LOGIC CONTROLLERS AND MODULES

Starts at

202

l Base Models with 10 to 14 I/O,

Expandable to 256

l Half the Size of Most PLCs l 1-, 4-, 8-, 16-and 32-Bit

Instructions

l DIN Rail Mountable, No Rack

Required

l Built-in Integral LED Display l High-level Network Access -

Modbus, DeviceNet and Profibus

l Remote Analog Modules for

Analog I/O, Thermocouples and RTDs

The Eaton Logic Controller (ELC) is Eaton Cutler-Hammer’s latest offering into the PLC (Programmable Logic Controller) market. Using the latest technology this reduced-sized ELC, with its abundant module selection provides a “just right” concept, for delivering only what you want for the price you desire.

The Right Amount of I/O

Why pay for functionality you’ll never need? Why be trapped with functionality that you can’t scale to meet changing needs? Eaton is changing everything with the ELC. At less than half the size of most PLCs, the CutlerHammer ELC is an ideal solution when space is at a premium and specialized I/O needs present themselves.

ELC’s Value Added Differences

4 Controller Styles:

• Basic—14 I/O (8I/6O) Over 130 instructions provide all the power you need; 2 serial ports for master/slave communications

• Clock/Calendar—Same features as the basic model plus clock/calendar, remote I/O and retentive data storage

• Analog—Same features as clock/calendar plus analog in and out

• High Speed—All the features of clock/ calendar with the ability to capture or output 100 Khz pulses

A Wealth of Features

The ELC family offers four styles of controllers. These controllers offer combinations of the following features:

• High speed pulse capture and high speed pulse output on all controllers

• Interrupts

• Large module selection AC/DC in, relay/transistor out

• Large analog selection of analog in, out, combined, thermocouple, RTD platinum

• Over 200 instructions to choose from: Floating point math, communications, hex, decimal, octal, BCD, ASCII conversion, 1, 4, 8, 16, 32, bit manipulations, logical, block move, block compare, retentive data storage, time base from clock/calendar

• 2 Modbus (ASCII or RTU) serial ports: 1 slave only, 1 master/slave

• ELC controller can be wired for remote I/O communications (except the PB model)

A-3

Space Saving, Cost Saving



This space-saving design perfectly fits at home in small machine control stations as well as other enclosed applications where space is critical.

While the ELC is perfectly suited for applications with 40 I/O and less, it can also be expanded to 256 I/O. That means there’s no need to change to a different controller as I/O needs expand. Furthermore, the ELC’s 2 communication ports can provide any networking task. In remote mode, the ELC exchanges and shares information with up to 16 other devices, in normal mode, the ELC can communicate with up to 32 other devices. Its small size allows for reduced panel size, and saves valuable machine space.

Capability

The ELC provides the instruction set of a large PLC in a small package. It is capable of 1-, 4-, 8-, 16- and 32-bit instructions, block compare, block move, communications, interrupts, clock/calendar and logic, over 240 instructions in all (except PB).

No Racks Required

A DIN rail lets you add as many modules as desired. Just snap on, and slide into place. All connections are done automatically.

ELC-PA10AADR, $440, shown larger than actual size.

Large PLC Features

Multiple communication ports, remote I/O ability, data storage, high speed counters, high speed pulse outputs, interrupts, timer resolution to 10 ms, PIDs, plus much more.

Easy Connectivity to Drives

No racks required.

Built-In Display

An integral LED display provides userassigned process monitoring, error messages, alarms, display counts and more.

Built-in display.

ELC communicates easily to MVX drives, eliminating the need to operate drives by analog voltage/current or digital I/O. ELC can access all of the parameters in the MVX by serial communications, saving money.

Remote Communication

All ELC analog type modules are capable of stand-alone operation. Mounted remotely, the ELC communicates to the analog module through its communications port. The ELC also lets you read parameters, set parameters, use scale, offset, and average values.

Software

ELCSoft programs in standard ladder, sequential function chart programming or instruction.

ELC Modules

ELC Expansion Modules

ELC expansion modules provide the correct amount of I/O for application solutions. Choose 8 or 16 I/O expansion modules added to the ELC processor 256 I/O (128 Inputs and 128 maximum).

ELC Specialty Modules

In addition to the expansion specialty modules like analog in, out, Platinum temperature, thermocouple, DeviceNet, PROFIBUS, and simulator switch module; can be added. The ELC-485APTR easily connects the RS485 port of MVX drive, controllers and other devices.

A-4

ELC SOFTWARE



• Display registers “in use” and modules attached to the ELC

• Monitor runtime applications; force (except basic), and enter/modify register values

• Wizards aid programming of remote I/O, standard communications, high speed counters, pulse outputs, ELC Link, positioning, interrupts, PIDs, and extension module setup

ELCSoft, software, $277.

GRAPHIC PANELS

ELC Graphic Panels are simple to program and easily connect to ELC products. ELC graphic panels make modifying an application quick and easy. ELC graphic panels also connect to Cutler-Hammer other devices. With over 30 objects that can be placed anywhere on the display, these tough panels also communicate with other major controllers. These graphic panels have two serial ports which can be used simultaneously to communicate. Transfer applications to or from these graphic panels using the handy transfer module (ELC-GPXFERMOD). Ten programmable functions keys provide easy to change pages, input numeric values, enter alpha-numeric passwords, set, reset and more. Create alarms, password protect, import bitmaps, and use many different fonts.

MVX drives, IQMODBUS meters and many

SPECIFICATIONS

ELECTRICAL/EMC ESD Immunity: 8 kV air discharge EFT Immunity:

Power Line: 2 kV Digital I/O: 1 kV Analog and Communication I/O: 250 V

Damped-Oscillatory Wave:

Power Line: 1 kV Digital I/O: 1 kV

RS Immunity: 26 MHz to 1 GHz, 10 V/m OTHER APPROVALS

Agency Certifications: UL 508, cUL, CE,

Class 1, Div 2

ELC-GP04,

$420.

ENVIRONMENTAL RATINGS

TRANSPORTATION AND STORAGE Temperature: -25 to 70°C

(-13 to 158°F)

Humidity: 5 to 95% OPERATING

Temperature: 32 to 131°F (0 to 55°C) Humidity: 50 to 95%

Power Supply Voltage:

ELC: 24 Vdc (-15 to 20%) with DC

input reverse polarity protection

Expansion Unit: Supplied by the ELC

Power Consumption: 3 to 6 W Insulation Resistance: >5 M @

500 Vdc, between all inputs/outputs and earth

A-5

ELC-GP02, $281.

Grounding: The diameter of the grounding wire cannot be smaller than the wire diameter of terminals L and N (all ELC units should be grounded directly to the ground pole)

Vibration/Shock Resistance:

Standard: IEC1131-2, IEC 68-2-6

(TEST Fc)/IEC1131-2 and IEC 68-2-27 (TEST Ea)

Approx. Weight: 0.158 kg (0.348 lb) DC INPUT POINT ELECTRICAL

Input Type: DC (SINK or SOURCE) Input Current: 24 Vdc 5 mA Active Level:

OFF/ON: Above 16 Vdc ON/OFF: Below 14.4 Vdc

Response Time: About 10 mS; an

adjustment range of 0 to 10,000 mS could be selected through D1020 and D1021

POWER

RUN

STOP

ERROR

BAT.LOW

POWER

RUN

STOP

ERROR

BAT.LOW

POWER

RUN

STOP

ERROR

BAT.LOW

POWER

RUN

STOP

ERROR

BAT.LOW

ELC-PB14 Series ELC-PC12 Series ELC-PA10 Series ELC-PH12NNDT



SPECIFICATIONS (CONTINUED)

Maximum I/O: 256 (128 In / 128 out);

any number of modules

I/O Type:

ELC-PB14 Series:

14 (8 in/6 out, digital)

ELC-PC12 Series:

12 (8 in/4 out, digital)

ELC-PA10 Series:

10 (4 in/2 out, digital; 2 in/2 out, analog)

ELC-PH12NNDT:

12 (8 in/4 out, digital)

DC In Sink/Source: Yes Execution Speed: Basic commands—

2 µ seconds min Program Language: Boolean + ladder

logic + SFC

Program Capacity:

ELC-PB14 Series: 3792 Steps ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 7920 Steps

Data Memory Capacity (bits):

ELC-PB14 Series: 1280 Bits ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 4096 Bits

Data Memory Capacity (words):

ELC-PB14 Series: 744 Words ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 5000 Words

Index Registers:

ELC-PB14 Series: 2 Words ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 8 Words

File Memory Capacity:

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT Only: 1600 Words

Commands:

ELC-PB14 Series: 32 Basic/

107 advanced

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 32 Basic/

168 advanced

Floating Point: Yes SFC Commands:

ELC-PB14 Series: 128 Steps ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 1024 Steps

Timers:

ELC-PB14 Series: 128 (1 to 100 ms) ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 256 (1 to 100 ms)

Counters:

ELC-PB14 Series: 128 (16 bit/

32 bit/up/down)

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 250 (16 bit/

32 bit/up/down)

High Speed Counters:

ELC-PB14 Series: 1 (14 modes)

10 K max

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 1 (14 modes) 20 kHz

for PA/PC; 100 kHz for PH

Pulse Output:

ELC-PB14 Series: 2 channels

10 kHz max

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 2 channels, 40 kHz

max for PC/PA, 100 kHz for PH

Master Control Loop:

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT Only: 8 Loops

A-6

Subroutines:

ELC-PB14 Series: 64 subroutines ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 256 subroutines

Interrupts:

ELC-PB14 Series: 6 ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT: 15 (external/time

base/HS CNTR /comm)

Real-time Clock/Calendar:

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT Only: Built-in

Specialty Expansions Modules:

8 (analog in/analog out/TC/RTD/PT); modules do not count in total I/O

Serial Ports: 2 (one RS232, one RS485) Remote I/O:

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT Only: With 16 other

devices

Run Time Editing:

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT Only: Yes, also

includes PB

Run/Stop Switch:

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT Only: Yes, also

includes PB

Removable Terminal Strips:

ELC-PC12 Series, ELC-PA10 Series, ELC-PH12NNDT Only: Yes, also

includes PB

Special Features:

ELC-PC12 Series: 2 potentiometers ELC-PA10 Series: Two 7-segment

displays ELC-PH12NNDT: 2 potentiometers

ELC-EX485APTR

COM2

COM1

ELC-CODNET

x10

POWER

7887

505

DR1 DR0 IN1 IN0

1 2 3 4

DIP ON

NODE ADDRESS

ELC-COPBDP

POWER

NET

x16

ELC-EX08NNSN

Style 1



Style 2

ELC EXPANSION MODULES

MODEL TYPE STYLE POINTS TYPE POINTS TYPE

ELC-EX08NNAN AC IN 1 8 120 Vac 0 — ELC-EX08NNDN DC IN 1 8 DC Sink or Source 0— ELC-EX08NNNR Relay OUT 1 0 — 8 Relay ELC-EX08NNDT IN/OUT Combo 2 4 DC Sink or Source 4 Transistor ELC-EX08NNNT Transistor OUT 1 0 — 8 Transistor ELC-EX06NNNI High Current Relay OUT 2 0 — 6 Relay (6 A) ELC-EX08NNDR IN/OUT Combo 2 4 DC Sink or Source 4 Relay ELC-EX16NNDR IN/OUT Combo 2 8 DC Sink or Source 8 Relay ELC-EX16NNDT IN/OUT Combo 2 8 DC Sink or Source 8 Transistor

INPUTS OUTPUTS

Style 1

Style 2

Style 3

Style 4

Style 5

Style 6 with

ELC-ACCOVER

ELC SPECIALTY MODULES

MODEL TYPE POWER STYLE POINTS TYPE POINTS TYPE

ELC-AN02NANN Analog OUT 1 0 -20 mA~20 mA 2 (12 bits) ELC-AN04NANN Analog OUT 2 0 -10V ~ +10V 4 (12 bits)

ELC-AN06AANN Analog Combo 2 4 ±10V, ±20 mA 2 (12 bits) 0 to 20 mA,

24 Vdc 0 to 10V

ELC-AN04ANNN Analog IN 24±10V, ±20 mA 0

(V = 14 bits,

I = 11 bits)

ELC-PT04ANNN PT100 24 PT100 0

ELC-TC04ANNN Thermocouple 2 4 J, K, R, S, T 0 ELC-EX08NNSN Switch Input 24 Vdc 3 8 Switch 0 ELC-COPBDP PROFIBUS DP 24 Vdc 4 32 Digital 32 Digital ELC-CODNET DeviceNet 24 Vdc 5 32 Digital 32 Digital ELC-485APTR RS485 N/A 6 0 — 0—

Easy Connect

(V = 14 bits, —

I = 13 bits)

A-7

INPUTS OUTPUTS

0 to 20 mA,

4 to 20 mA

0 to 10V,

2 to 10V

To Order (Specify Model Number)



MODEL NO. PRICE DESCRIPTION AC DC ANALOG RELAY TRANSISTOR ANALOG

ELC-PB14NNDR $202 14 I/O PB Series 86 ELC-PB14NNDT 202 14 I/O PB Series 86 ELC-PC12NNAR 256 12 I/O PC Series 84 ELC-PC12NNDR 256 12 I/O PC Series 84 ELC-PH12NNDT 266 12 I/O PH Series 8 4 ELC-PA10AADR 440 10 I/O PA Series 42 2 2

DIGITAL I/O EXPANSION MODULES

MODEL NO. PRICE DESCRIPTION TYPE AC DC RELAY TRANSISTOR

ELC-EX06NNNI $143 6 I/O expansion 6 A outputs 6 ELC-EX08NNAN 97 8 I/O expansion AC in 8 ELC-EX08NNDN 82 8 I/O expansion DC in 8 ELC-EX08NNNR 127 8 I/O expansion Relay out 8 ELC-EX08NNDR 127 8 I/O expansion in/out combo 44 ELC-EX16NNDR 143 16 I/O expansion in/out combo 88 ELC-EX08NNDT 119 8 I/O expansion in/out combo 44 ELC-EX08NNNT 127 8 I/O expansion Transistor out 8 ELC-EX16NNDT 143 16 I/O expansion in/out combo 88 ELC-EX08NNSN 97 8 I/O expansion Switch in 8

ANALOG I/O MODULES MODEL NO. PRICE DESCRIPTION ANALOG IN ANALOG OUT

ELC-AN04ANNN $260 4 I/O analog in 4 ELC-AN02NANN 245 2 I/O analog out 2 ELC-AN04NANN 340 4 I/O analog out 4 ELC-AN06AANN 355 6 I/O analog in/out 42 ELC-TC04ANNN 370 4 I/O thermocouple J, K, R, S, T 4 ELC-PT04ANNN 326 4 I/O platinum RTD, PT100 4

ACCESSORIES MODEL NO. PRICE DESCRIPTION

ELC-CODNET $340 ELC expansion module for DeviceNet e ELC-COPBDP 480 ELC expansion module for ProfibusDP slave ELC-MC01 450 ELC motion control for 1 axis, use with ELC-PHNNDT ELC-ACPGMXFR 143 Program transfer module for ELC controllers ELC-GP02 281 ELC graphics panel, monochrome, 160x32 pixels, 10 keys ELC-GP04 420 ELC graphics panel, monochrome, 128x64 pixels, 10 keys ELC-GPXFERMOD 93 ELC graphics panel transfer module ELC-PS01 67 ELC power supply, 24 W, 1 A ELC-PS02 97 ELC power supply, 48 W, 2 A ELCSOFT 277 ELC programming software for ELC controllers ELCSOFTGP 289 ELC programming software for ELC graphics panels ELC-CBPCELC1 43 Cable to connect a PC or a GP unit to ELC, 1 m (3.3') (DB9 pin female to 8 pin DIN) ELC-CBPCELC3 46 Cable to connect a PC or a GP unit to ELC, 3 m (9.8') (DB9 pin female to 8 pin DIN)

Ordering Example: ELC-PB14NNDR, ELCSOFT, $202 + 277 = $479.

Omega Products ELC-AN02NANN User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual