Page 1
iServer MicroServer
TM
for Serial-to-Ethernet Applications
Connect Any Serial
Device to Ethernet LAN
and the Internet
Wall Mount or
Benchtop for
Commercial
Applications
EIT Series
FCC-B
U Put Any Serial Device On the
Network in Minutes
U Bridge RS232/RS485 to TCP/IP
U Auto-Negotiating 10/100 Ethernet Half/
Full Duplex
U Built-In Web Server
U TCP, UDP, SNMP, SMTP, TFTP, ICMP,
Telnet, DHCP, DNS, HTTP, and ARP
U MODBUS® RTU to MODBUS
TCP/IP Bridging
U Email Notifications and SNMP Traps
U 1 to 6 Programmable I/Os
U Firmware Upgrade Over Ethernet
U Custom Firmware/Private Labeling
for OEMs
U TCP Socket with Command Line Interface
U Serial Speed up to 460 Kb/s
U Authentication and Access Restrictions
U Small Enough to Fit Almost Anywhere
U Free COM Port Redirector
U Free Configuration Software
The 3rd Generation OMEGA® iServer connects any
serial device (RS232, RS485) to an Ethernet network
or the internet in minutes, including serial Modbus to
MODBUS TCP/IP over Ethernet. The iServer3G can
send notifications by email, and has SNMP for remote
management. OMEGA offers custom firmware and
private-labeling for OEMs.
EIT-W shown
smaller than
actual size.
Embedded PC
board assembly
for OEMs;
EIT-PCB, shown
smaller than
actual size.
Consult
OMEGA OEM team
for pricing.
EIT-D shown smaller
than actual size.
Quickly
Configured Through
a Web Browser
DIN Rail Mount
for Industrial
Applications
R
R-14
Page 2
Specifications
Serial Interface
Interface: RS232 or RS485 (2- and 4-wire)
Connector: DB9 male DTE for RS232; 8 position terminal
block plug for RS485
Serial Data Rates: 300 to 460,800 Kbps
Characters: 5, 6, 7, or 8 data bits
Parity: Odd, even, or none
Stop Bits: 1 or 2
Flow Control: Hardware (RTS/CTS) and software (Xon/Xoff)
Digital I/Os: 1 to 6 programmable input/output lines,
depending on model
Network Interface
Interface: Fixed or auto-negotiating 10/100BASE-T half/full
duplex Ethernet with auto MDI/MDIX
Connector: RJ45
Protocols: TCP, UDP, SNMP, SMTP, TFTP, ICMP, DHCP,
DNS, HTTP, ARP, Modbus TCP/IP, and Telnet
Compliant to Standard: IEEE 802.3
Indicators (LEDs): 100BASE-T, Network Link/Activity, and
Serial Transmit/Receive
32-Bit Microprocessor:
CPU: ARM7, 72 MHz
Memory: 512 Kbyte Flash, 32 Kbyte SRAM
Embedded Web Server: Serves dynamic Web pages and
Java applets
Management: Web server, Telnet login, Serial login,
iConnect
General
Power (EIT-PCB):
Input: 5 Vdc @ 200 mA maximum
Consumption: 1 W maximum
Power (EIT-W):
Input: 5 Vdc @ 200 mA maximum
Consumption: 1 W maximum
Safety Qualified AC Power Adaptor (Included):
Nominal Output: 5 Vdc@600 mA
Input: 100 to 240 Vac, 50/60 Hz
Operating Temp: 0 to 40°C (32 to 104°F)
Power (EIT-D):
Input: 10 to 32 Vdc
Consumption: 2 W maximum
iDRN-PS-1000: (DC power supply
sold separately)
Environmental
Operating Temp: -40 to 85°C (-40 to 185°F)
Storage Temp: -40 to 100°C (-40 to 212°F)
Software: COM Port Redirector (iPort);
Configuration software (iConnect)
Put any serial device on
the network in minutes.
EIT-W
R-15
READINGS
Overview
Network
Serial
I/O Pins
Management
Security
Device Query
Device Setup
Readings
Terminal
System
Diagnostics
http://192.168.1.200
92.4 Deg. C
Device Name
No
1 Boiler 1 92.4 Deg. C
READINGS
Reading Unit
Auto Update000
Page 3
93.1
(3.67)
66.0 (2.60)
100BASE-T
LINK/ACT
TRANSMIT
RECEIVE
Dimensions: mm (inch)
COMMUNICATIONS
ETHERNET
RESET
RECEIVE
TRANSMIT
DC POWER IN
90.2
(3.54)
LINK/ACT
100BASE-T
RS232
27.4
(1.08)
22.4
(0.88)
EIT-W
Material: ABS (ChiMei PA-757) with wall mount
Weight: 77 g (0.17 lb)
1 2
TX (OUT)
RX (IN)
J10
LEDs
J9 GND
SW1
J8 +5V
1
J12
RJ45
RX (IN)
1
J15
2
TX (OUT)
1
RST PWR
J18
2
GND
2.525 [64.14]
RJ45
0.455 [11.56]
0.465
[11.81]
EIT-PCB
Board Surface Area: Approximately 80 mm
J1 (JTAG)
P11
+5V
GND
1
2
J16A
3
4
5
1.440 [36.58]
6
7
+5V
GND
8
J6
1 2
For pin & socket connectors:
0.036 [0.91] hole dia
0.024 [0.61] hole dia
JTAG
For mounting:
0.120 [3.05] hole dia
2
Weight: 14 g (0.03 lb)
RS485
(3 inch2)
115 (4.53)
EIT-D
Material: Polycarbonate case with DIN rail mount
Weight: 113 g (0.25 lb)
Bar-Code
UPS with
EIT-PCB
Vending
Machine
EIT-PCB
with
Reader with
EIT-PCB
Scale with
EIT-PCB
Time Clock and
Card-Key Access Control
with EIT-PCB
Security Alarm
with
N/C
25.1
(0.99)
Cash Register
with
EIT-PCB
To Order Visit omega.com/eit-w for Pricing and Details
Model No. Description
EIT-W iServer MicroServer™ for Serial-to-Ethernet applications in commercial wall-mount case with
universal AC power adaptor (100 to 240 Vac input, 5 Vdc output); full RS232 serial interface
with 1 input pin
EIT-W-485 Commercial wall-mount case; RS485 (full and half duplex) serial interface with 3 I/Os
EIT-D Industrial DIN rail case with screw terminal serial ports; full RS232 serial interface without I/Os
EIT-D-485 Industrial DIN rail case; RS485 (full and half duplex) serial interface with 3 I/Os
EIT-PCB Printed circuit board for embedded applications; full RS232 serial interface with 3 I/Os
EIT-PCB-485 Printed circuit board; RS485 (full and half duplex) serial interface with 6 I/Os
Ordering Example: EIT-W, one full RS232 serial interface commercial wall-mount iServer MicroServer.
Volume discounts are available.
*
Consult OMEGA OEM team for application assistance and quantity pricing: email sales@omega.com or call 714-540-4914.
**
R-16
R
Loading...