E-3
l Small 5 and 8 mm Diameters for
Use in Applications with Limited
Space for Mounting Sensors
l Stainless Steel or Ni-Brass
Housings
l All Models Include an LED
Indicator to Show Output Status
l Short Circuit and Reverse
Polarity Protection
l Rated NEMA 4, 4X, 6, 6P, 12 and
13 (IP67) for High Resistance to
Environmental Factors
Applications
l Automation Equipment
l Robotics
l Machine Tool
l Counting
l Sorting
These unique Cutler-Hammer®Inductive
Proximity Sensors are designed to be used
in extremely small spaces. A wide variety of
models are available with housing diameters
of 8 mm (0.31") and a very small 5 mm
(0.20"), allowing you to choose the one
that best fits your application. The sensors
are 3-wire devices that operate from
10 to 30 Vdc. Both shielded and unshielded
versions are available.
E57 Series
Starts at
$
74
E57-08GS01-CDB, $77,
shown larger than actual size.
Cable Models—Threaded Barrel
Connector Models—Threaded Barrel
E57EAL5T110SP, $104, shown
larger than actual size.
SPECIFICATIONS
Operating Voltage: 10 to 30 Vdc
Maximum Load Current: 200 mA
Switching Frequency: 2 kHz
Leakage Current: 0.01 mA maximum
Voltage Drop: 1.5V maximum
Burden Current: 10 mA maximum
Protection Transient: Power on false
pulse suppression, auto-reset short
circuit
Switching Hysteresis: <15% rated
sensing distance
Repeat Accuracy: <1% sensing distance
Time Delay Before Availability: <50 mS
Output Indicator LED: Lights when
output is ON
Operating Temperature: -25 to 70°C
(-13 to 158°F)
Enclosure Ratings: NEMA 4, 4X, 6, 6P,
12 and 13 (IP67)
Housing Material: Stainless steel or
Ni plated brass
Cable: PVC high flex, oil/water
resistant, 22 AWG
INDUCTIVE
PROXIMITY SENSORS
SMALL DIAMETER—5 AND 8 mm
DIA LENGTH mm (in) THREAD NUT WIDTH CONNECTOR LED
A B C D E F DIA G LOCATION
5 mm 25 — 21 M5 x 0.5 SW8 — L1
(0.20") (1.0) (0.8)
8 mm 30 — 30 M8 x 1 SW13 — L2
(0.31") (1.8) (1.2)
cable
8 mm 50 40 25 M8 x 1 SW13 1.2 L2
(0.31") (2.0) (1.6) (1.0) (0.47)
micro-
con.
Dimensions: mm (in)
5 mm
8 mm