l Shielded and Unshielded Models
l High Visibility Red LED Indicator
l Prewired 2 m (6.6') PVC Cable or
M12 4-Pin Micro Connector
l 1200 psi (83 bar) Washdown
Rated IP67
l Short Barrel or Standard Lengths
l Solid Potted Internal Circuitry
Withstands Shock and Vibration
l Wrench Flats for Easy Installation
The E2E-3DC Series 3-wire DC inductive
proximity sensors are the most popular
proximity sensors used for metal detection
in automation and robotics applications.
E2E-3DC sensors have an increased control
output current making them a good choice
for multiple sensing applications for use with
automation controllers and PLC’s. These
proximity sensors come in shielded or
unshielded, and NPN or PNP models with
extended sensing distances to allow the
sensor to be mounted farther from the target.
This reduces the potential for target impacts,
down time, maintenance cost and increases
the reliability of your application. The E2E
series inductive proximity sensors have solid
potted internal circuitry to withstand shock,
vibration and for superior environmental
resistance such as exposing them to cutting
oils and washdown locations.
XS2F-M12PVC4S2M$16
XS2F-M12PVC4S5M16
XS2F-M12PVC4A2M16
XS2F-M12PVC4A5M16
Y92E-B85Mounting bracket for M8x1
Y92E-B125Mounting bracket for M12x1
Y92E-B185Mounting bracket for M18x1
Y92E-B305Mounting bracket for M30x1.5
M8-MHWS4Mounting hardware for M8x1 includes 1 washer and 2 nuts
M12-MHWS4Mounting hardware for M12x1 includes 1 washer and 2 nuts
M18-MHWS6Mounting hardware for M18x1 includes 1 washer and 2 nuts
M30-MHWS8Mounting hardware for M30x1.5 includes 1 washer and 2 nuts
Comes complete with two mounting nuts and one washer.
Ordering Examples: E2E-X2E1, M12x1 shielded, NPN-NO inductive proximity sensor, 2 mm (0.08") sensing distance with 2 m (6.6') PVC
cable, and Y92E-B12 mounting bracket, $78 + 5 = $83.
E2E2-X10MC1-M1, M18x1 unshielded, NPN-NO proximity sensor with 10 mm (0.39") sensing distance and 4-pin M12 micro connector, and
XS2F-M12PVC4S2M, 2 m (6.6') long 4-pin M12 micro cordset, $89 + 16 = $105.
SHOP
ONLINE AT
4-pin
4-pin
4-pin
4-pin
M12 micro DC cordset, 2 m (6.6') straight connector
M12 micro DC cordset, 5 m (16') straight connector
M12 micro DC cordset, 2 m (6.6') right angle connector
M12 micro DC cordset, 5 m (16') right angle connector
To download information and
to order automation products
online, visit omegamation.com
Calibrators, Connectors, General Test and Measurement
Instruments, Glass Bulb Thermometers, Handheld Instruments
for Temperature Measurement, Ice Point References,
Indicating Labels, Crayons, Cements and Lacquers, Infrared
Temperature Measurement Instruments, Recorders Relative
Humidity Measurement Instruments, RTD Probes, Elements
and Assemblies, Temperature & Process Meters, Timers and
Counters, Temperature and Process Controllers and Power
Switching Devices, Thermistor Elements, Probes and
Assemblies,Thermocouples Thermowells and Head and Well
Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level
Measurement, Magnetic Flowmeters, Mass Flowmeters,
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area
Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen
Instrumentation, Environmental Instrumentation, pH
Electrodes and Instruments, Water and Soil Analysis
Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems,
Communication Products and Converters, Data
Acquisition and Analysis Software, Data Loggers
Plug-in Cards, Signal Conditioners, USB, RS232, RS485
and Parallel Port Data Acquisition Systems, Wireless
Transmitters and Receivers
Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
Devices, Flexible Heaters, General Test and Measurement
Instruments, Heater Hook-up Wire, Heating Cable
Systems, Immersion Heaters, Process Air and Duct,
Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.