Omega Products DP8891 Installation Manual

DP8891

Waterproof Thermometer
Probe and Mounting Bracket

INSTRUCTION

SHEET

M5002/1210

Shop online at: omega.com e-mail: [e-mail]
For latest product manuals: omegamanual.info

MADE IN CHIN A

Keep DP8891 away from direct sun or high heat exposure to
avoid plastic housing from being deformed and meter disorder.

Clean the meter and probe with water only.

Remove the batteries for long-term storage.

To change the default temperature unit, turn off the meter first.
Press “ON/OFF” for more than 5 seconds until C & F
interchangeably switch as on the LCD. Release the “ON/OFF” key
when your desired unit is displayed. The meter will be powered on
and the unit setting is confirmed.

NO NOT clean the meter and probe with any chemical or detergent.

Solution: a. Make sure the probe is well contacted with the meter

Solution: a. Make sure the probe is well contacted with the meter

To ensure an accurate reading and to extend the probe life time,
please use the probe correctly.

It is suggested you do not hold the probe handle while measuring
high temperature. It is better to ues the probe handle for safety.

OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a
period of 13 months from date of purchase. OMEGA’s Warranty adds an additional one (1) month grace
period to the nor mal one (1) year product warrant y to cover handling and shipping time. This
ensures that OMEGA’s customers receive maximum coverage on each product.

If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service
Department will issue an Authorized Return (AR) number immediately upon phone or written request.
Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no

charge. OMEGA’s WARRAN TY do es not appl y to defects resulting from any action of the purchase r,
includi ng but not limited to mi shandling, improper interfa cing, operation ou tside o f desig n l imits,
improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of
having been tampered with or shows evidence of having been damaged as a result of excessive corro­sion; or current , he at, moisture or vibrati on; improper specification; misapplication; misuse or oth er
operating conditions outside of OMEGA’s control. Components in which wear is not warranted, include
but are not limited to contact points, fuses, and triacs.

OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA

neither a

ssumes responsibilit y for any omissions or erro rs nor assumes liability for any
damages that result from the use of its products in accordance with information provided by
OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the
company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES
OR REPRESE NTATIONS OF A NY KIND WHATSOEVER, EXPRESSED OR IMP LIED, EXCEPT

TH AT OF TIT LE, AN D ALL IMP LI ED WAR RA NT IES IN CL UDI NG AN Y WARR AN TY OF
ME RC HAN TA BIL IT Y AND FI TN ESS FOR A PA RTI CU LAR PU RP OS E ARE HE RE BY
DISCLAIMED. LIMITATION OF L IABILITY: The r emedies of purc haser set forth herein are
exclusive, and the total li ability of OMEGA with respect to th is order, whether based on
contr act, warran ty, negligen ce, indemni ficat ion, strict liabil ity or otherw ise, shall not
exceed the purchase price of the component upon which liability is based. In no event shall
OMEGA be liable for consequential, incidental or special damages.

CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic
Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical
applications or used on humans. Should any Product(s) be used in or with any nuclear installation or

act ivit y, medi cal ap plica tion , u sed on huma ns, or misu sed in a
responsibility as set forth in our basic WARRANTY/ DISCLAIMER language, and, additionally, purchaser
will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out
of the use of the Product(s) in such a manner.

Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE
RETURNING A NY P RODUCT(S) TO OMEG A, PURCHASER MUST OBT AIN AN AUTHORIZED RETURN
(AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESS­ING DELAYS). The assigned AR number should then be marked on the outside of the return package and
on any correspondence. The purchaser is responsible for shipping charges, freight, insurance and proper pack­aging to prevent breakage in transit.

FOR WARRANTY RETURNS, please have the
following information available BEFORE contacting
OMEGA:

1. Purchase Order number under which the

product was PURCHASED,

2. Model and serial number of the product under

warranty, and

3. Repair instructions and/or specific problems

relative to the product.

OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible.
This affords our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2010 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied,
photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in
whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.

WARRANTY/ DISCLAIMER

ny way , O MEGA as sum es no

RETURN REQUESTS / INQUIRIES

FOR NON-WARRANTY REPAIRS,
for current repair charges. Have the following
information available BEFORE contacting OMEGA:

1. PurchaseOrder number to cover the COST
of the repair,

2. Model and serial number of the product, and

3. Repair instructions and/or specific problems
relative to the product.

consult OMEGA