Omega Products CL1201 User Manual

High Temperature Dry Block Calibrator

CL1201

Standard

U Wide Temperature Range

400 to 1200ºC (752 to 2192ºF)

U Simple to Use U Highly Accurate ±3°C

(±6°F) Entire Range and Excellent Stabilities to Within ±0.1°C (±0.2°F)

U Calibrates

Thermocouples and RTD’s

U Multi-Hole Insert

Block For Accurate Comparison Calibration

U Interchangeable

Test Wells

U Rapid Heating/

Cooling Rates

U Automatic Fan Cooling U Rugged Case with

Carry Handle

U Completely Portable for

Factory, Laboratory and Instrument Shops

U RS232 Communications

Standard

U Free Software U NIST Certificate

Included

CL1201

The CL1201 is designed to provide very accurate and repeatable thermal calibration between 400°C and 1200°C for a wide variety of thermocouples and other temperature sensors in industries such as glass manufacture, power generation, automotive and material processing. This rugged, economically priced portable thermocouple dry block calibrator is supplied with a NIST traceable certificate. The unit provides excellent stabilities to within ±0.1°C and has display accuracy of better than ±3°C between 400 and 1200°C.

All models shown smaller than actual size.

CL1200IB-E test well insert.

CL1200IB-C test well insert.

K-25

The CL1201 block calibrator utilizes a special heater design for optimum temperature uniformity and rapid heating rates. The heating system consists of heater elements embedded in lightweight vacuumformed ceramic fiber moldings which allows faster heating rates and extends the working life above other ceramic tube designs which have heater elements wrapped around a ceramic tube. An isothermal block assembly is machined from a special alloy giving excellent thermal conductivity and also resists high temperature oxidation.

This block is designed to optimize performance between sufficient mass for good stability and uniformity and to have a low enough mass to have rapid heating/cooling rates and short stabilization periods. RS232 communications is standard.

198

(7.8)

350

(13.8)

Specifications

Minimum Temperature: 400°C (752ºF) Maximum Temperature:

1200°C (2192ºF)

Display Accuracy: ±3°C (±6ºF) Temperature Uniformity: ±0.2°C

(±0.4ºF) Temperature Stability: ±0.2°C (±0.4ºF) at 1200°C (2192ºF) after 20 mins Display Resolution: 0.1° to 999.9 then 1° to 1200°C

Selectable: °C or °F Heating Rate: 100 to 1200°C, 20 min Cooling rate: 1200 to 200°C, 140 min Fan Cooling: Automatic Power: 120 Vac, 50/60 Hz 230 Vac,

50/60 Hz, 1600 W Large Insert Size: 34 D x 155 mm Deep (1.33 x 6.10") Dimensions: 350 H x 198 W x 279 mm D (13.8 x 7.8 x 11.0") Weight: 10 kg (22 lb)

Extended Warranty

Program

OMEGACARE

is available for models shown on this page.

Ask your sales representative for full details

when placing an order. OMEGACARE

covers parts, labor and equivalent loaners.

extended warranty program

279

(11.0)

Dimensions: mm (inch)

To Order Visit omega.com/cl1201 for Pricing and Details

Model No Description CL1201 High temperature block calibrator, 120 Vac, no insert CL1201-230V High temperature block calibrator, 230 Vac, no insert CL1200-HC Replacement hard carrying case

Inserts and Ceramic Block Insulators (Must Order as a Pair)

Model No Description CL1200IB-A Insert, 4 x 8.0 mm CL1200CB-A Ceramic block insulator for insert CL1200IB-A CL1200IB-B Insert, 2 x 3 mm, 2 x 4 mm, 2 x 6 mm CL1200CB-B Ceramic block insulator for insert CL1200IB-B CL1200IB-C Insert, 1⁄8, 1⁄4, 3⁄16, 5⁄16, 3⁄8" CL1200CB-C Ceramic block insulator for insert CL1200IB-C CL1200IB-D Insert, 2 x 3⁄16, 2 x 1⁄4, 2 x 3⁄8" CL1200CB-D Ceramic block insulator for insert CL1200IB-D CL1200IB-E Insert, 6 x 1⁄4" CL1200CB-E Ceramic block insulator for insert CL1200IB-E

Comes complete with software, hard carrying case, and operator’s manual. Ordering Example: CL1201 high temperature block calibrator, 120 Vac, CL1200IB-C insert,

⁄

OCW-2, OMEGACARESM extends standard 3-year warranty to a total of 5 years.

⁄

" and CL1200CB-C ceramic block insulator.

⁄

K-26