Mini hot point® Dry Block
Probe Calibrator
CL1000 Series
Standard
U Built-in Digital
1
⁄32 DIN Temperature
230 Vac
model only
Controller
U Rugged Miniature
Handheld, Benchtop
and Portable Design
U Fast, Accurate,
Stable Readings
U Fast Heat-Up/
Cool-Down Time
U Standard and Metric
Well Designs
Available
U Automatic Fan
Cooling
U 230 Vac Models
CE Marked
U NIST Calibration
Certificate With
2 Data Points
Included
U Soft Carrying
Case, Power Cord
and Complete
Operator’s Manual
Included
U Optional RS232
Communications with Free
CN9-SW Communications
Software and Cable
CL1000A, shown with TTSS-HH probe, sold
separately. Visit omega.com/jtss-hh for
pricing and details.
OMEGA’s CL1000 Series mini hot
point® dry block probe calibrator
offers a fast, accurate, stable
solution for calibrating temperature
probes in both the laboratory
and in the field by providing a
lightweight, rugged miniature
design. There are 4 different probe
well styles available (shown on
next page). The CL1000 Series
has been engineered into a custom
fabricated metal enclosure together
with a high performance
1
⁄32 DIN controller, and has been
designed to meet a high level of
quality, reliability and safety. Each
230 Vac unit carries the CE mark
and has achieved performance
results high above the required
levels. The calibrator has
a temperature calibration range of
ambient 10 to 260°C (ambient 20
to 500°F) and can operate in an
environment of 0 to 50°C (32 to
122°F) and a relative humidity of
0 to 90% non-condensing.
K-27
Caution: To avoid fire hazard or damage to
your calibrator, always allow your calibrator
to cool down to ambient temperature before
returning to storage.
We make running changes when
technical advances allow. Check at time
of ordering for additional features.
Specifications
Temperature Range:
Ambient 11 to 260°C
(ambient 20 to 500°F)
Accuracy: ±1.5°C (±2.75°F)
Display Resolution: 0.1°
Stability: ±0.15°C (±0.3°F)
Probe Well Uniformity: ±0.15°C (±0.3°F)
Custom Well Styles
3.2 (0.125)
6.4 (0.25)
1.6 (0.0625)
3.2 (0.125)
4.8 (0.1875)
4.0 (0.15625)
3.2 (0.125)
6.4 (0.25)
1.6 (0.0625)
3.2 (0.125)
4.8 (0.1875)
4.0 (0.15625)
3.2 (0.125)
4.8 (0.1875)
3.2 (0.125)
6.4 (0.25)
6.4 (0.25)
3.2 (1/8)
6.4 (1/4)
1.6 (1/16)
3.2 (1/8)
4.8 (3/16)
4.0 (5/32)
3.2 (1/8)
4.8 (3/16)
3.2 (1/8)
6.4 (1/4)
6.4 (1/4)
3.2 (1/8)
1.6 (1/16)
3.2 (1/8)
1.6 (1/16)
4.8 (3/16)
Available. Contact OMEGA’s
Custom Engineering
Department for Price and
Delivery.
CL1000 mini hot point,® shown calibrating a
thermocouple probe, Model KTSS-HH, visit
omega.com/jtss-hh, with the HH64A handheld
thermometer, visit omega.com/hh64a.
The -C2 option allows for remote
configuring, adjustment, and
reading. Free software is included
with these models.
Heat-Up Time: 38 to 260°C (100 to 500°F) in 15 minutes
Cool-Down Time: 260 to 38°C (500 to 100°F) in 70 minutes
Ambient Environmental Conditions
Temperature: 0 to 50°C (32 to 122°F)
Humidity: 0 to 80% RH non-condensing
Internal Control Sensor: Platinum RTD, 100 Ω, 0.00385, Class A
Power Requirements:
CL1000(*): 3.15 A @ 115 Vac ~ (±10%) 50/60 Hz, 275 W
CL1000(*)-230V: 1.6 A @ 230 Vac ~ (±10%) 50/60 Hz, 275 W
Dimensions: 127 W x 56 H x 155 mm D (5 x 2.2 x 6.1")
Weight: 1.7 kg (3.8 lb)
Approvals: CE (230 Vac models only)
Note: For additional controller specifications, and details on the free
CN9-SW software included with RS232 models, see the CN9500
Series controllers at omega.com/cn9500
Extended Warranty
Program
SM
OMEGACARESM extended warranty program is
available for models shown on this page. Ask your sales
representative for full details when placing an order.
OMEGACARE
SM
covers parts, labor and equivalent loaners.
Available Well Styles*
STYLE A
4.0 (0.15625)
4.8 (0.1875)
STANDARD
STYLE B
6.4 (0.25)
4.8 (0.1875)
STANDARD
STYLE C
1.6 (0.0625)
4.8 (0.1875)
Dimensions: mm (inch)
3.2 (0.125)
6.4 (0.25)
1.6 (0.0625)
3.2 (0.125)
3.2 (0.125)
6.4 (0.25)
K
3.2 (0.125)
3.2 (0.125)
1.6 (0.0625)
To Order
Visit omega.com/cl1000 for Pricing and Details
Model No. Description
CL1000(*) Mini hot point dry block probe calibrator,
115 Vac
CL1000(*)-230V** Mini hot point dry block probe calibrator,
230 Vac
Insert well style code “A”, “B”, “C” or “D” see diagrams to the right.
*
Note: Only 230 Vac models available as CE marked.
**
Communications Option
Suffix Description
-C2 RS232 communications and free CN9-SW
software, pre-wired, 1.8 m (6') cable included
Comes complete with power cord 1.8 m (6'), soft carrying case, operator’s
manual, and NIST-traceable calibration certificate at 121 and 260°C
(250 and 500°F) temperatures.
Ordering Example: CL1000C-C2, mini hot point dry block calibrator
with well style C and RS232 option. OCW-2, OMEGACARESM extends
standard 3-year warranty to a total of 5 years.
K-28
STANDARD
STYLE D
3.0 (0.118)
METRIC
1.5 (0.059)
3.2 (0.125)
4.5 (0.177)
2.0 (0.079)
6.0 (0.236)