Omega Products CH62-J User Manual

Transition Adaptors

/T-terminal block dwg

U Rugged, One-Piece Molded Construction
U ANSI or IEC
U For Use with a Variety of Meters and Probes

TAS adaptors provide quick and easy connections between
standard and miniature connector systems. These color-coded
units are available in all thermocouple calibrations including
Tungsten-Rhenium alloys. Any combination of male and
female contacts for miniature and standard positions
of the adaptor are available. The TAS-U-5, TAS-U-6 and
TAS-U-7 are only available in uncompensated calibration.

To Order Visit omega.com/tas_ch60 for Pricing and Details

Model No.
ANSI
Color Code Description

TAS-(*)-1 Male standard to male mini
TAS-(*)-2 Female standard to male mini
TAS-(*)-3 Male standard to female mini
TAS-(*)-4 Female standard to female mini
TAS-U-5 Male banana plug to female mini
TAS-U-6 Sheathed banana plug to banana plug
TAS-U-7 Sheathed banana plug to banana plug set

*Specify Calibration: J, K, T, E, R/S, N or U (uncompensated).
May be ordered with G, C, or D calibration, add an additional cost
(models 1 and 3 not available).

†Add suffix “-IEC” for IEC color code.
Ordering Example: TAS-K-2, adaptor for Type K thermocouples with

female connection on the standard end and male connection on the
miniature end.

Type 7

Type 4

Type 2

For connector dimensions,
please visit omega.com

Type 6

Type 5

Type 3

Type 1

All shown smaller
than actual size.

Discount Schedule

1-10 .................................... Net

11-49 ...................................5%

50-99 .................................10%

100-999 .............................15%

1000-4999 .........................20%

5000 and over....................25%

†

Color-Coded

Round Terminal Blocks

U ANSI or IEC† Color-Coded
U Allows Single or Dual Wire

Pair Connection

U Rugged Glass-Filled

Nylon Terminal Block
Construction

U -29 to 220°C (-20 to 425°F)

Temperature Rating

U Fits 1.5 to 6 mm (

1

⁄16 to 1⁄4")
Probes, Tubes and
Cable Sheaths

OMEGA’s color-coded CH series terminal
blocks are designed to fit metal-sheathed
cable or probes between 1.5 and 6 mm

1

(

⁄16 and 1⁄4") in diameter. The CH terminal

blocks use a
adapt to probes or cables (sold separately;
please visit omega.com.

1

⁄8 NPT compression fitting to

Terminal block
diameter: 31.7 mm (1.25
thickness: 9.7 mm (0.38")

G-39

Shown actual size.

")

Model No.
ANSI Color Code # Terminals

CH62- (*) 2
CH63-(*) 3
CH64-(*) 4

* Insert calibration code: J, K, T, E or S, for thermocouple
type desired, or U for uncompensated lugs.

†Add suffix “-IEC” for IEC color code.
Ordering Example: CH62-K, 2-position round terminal

block, Type K.

Open Terminal

Block

Compression

Fitting

1/8 BSPT

OMEGACLAD

Wire

®