1
⁄4 to 1" PREMIUM QUALITY, MAINTENANCE
FREE TUBE COMPRESSION BAR STOCK
BALL VALVES
BV70
Series
U Two Ferrule Compression
Fittings for Positive
and Repeatable
Two-Point Sealing
U Self Compensating Valve
Stem Seal Design
Ensures Long,
Leak-Tight Maintenance
Free Service
U Assembled Clean and
Without Lubricants to
Minimize the Possibility
of System Contamination
U Offered with Pneumatic
or Electric Actuation or a
Variety of Manual Options
BV71-SS shown larger than actual size.
Tube Dimensions - Inches
Size OD
¹⁄₄ 3.72 1.58 0.50 2.31 0.19 ⁹⁄₁₆
³⁄₈ 3.70 1.58 0.50 2.31 0.28 ¹¹⁄₁₆
¹⁄₂ 3.94 1.58 0.50 2.31 0.36 ⁷⁄₈
³⁄₄ 4.17 1.67 0.59 3.41 0.49 1¹⁄₈
1 4.92 1.91 0.75 3.41 0.62 1¹⁄₂
A B C D E F
The BV70 Series tube compression
valves offer an excellent alternative
to high pressure models for those
applications where a pressure
rating of 1,000 psi or less is
required. The BV70 Series is
offered in both brass and 316
stainless steel bar stock
construction in sizes of
tube and comes equipped standard
with reinforced PTFE seats and
stem seal and stainless steel balls
and stems. The compression joint
uses the proven, twin ferrule design
to ensure positive two point sealing
between the tube and fitting.
The BV70 Series valve is carefully
cleaned, assembled without lubricants and then thoroughly tested to
ensure leak-tight performance. This
process minimizes contamination
of the media and helps to protect
delicate system instrumentation.
As with all valve products the
BV70 Series utilizes our superior
self-compensating stem seal design.
This proven design automatically
compensates for wear as well as
thermal expansion and contraction
resulting in a leak tight,
maintenance free, service life.
1
⁄4 to 1" OD
The BV70 Series is offered
with oval, manual operators
but can be easily automated
by directly mounting the
pneumatic or electric
actuators (see BVP70,
BVPS70 and BVE70
Series). Both compact
automation packages
feature rigid, precise
mounting systems to reduce
wear and ensure long
trouble-free service.
SPECIFICATIONS
Materials of
Construction
Brass: ASTM B-16
316SS: ASTM A276
Ball and Stem:
316 Stainless Steel
Seats and Stem Seal:
Glass Reinforced PTFE
Temperature: -45 to 232ºC
(-50 to 450ºF) (see Pressure
Temperature Chart)
Pressure: 68.9 bar
(1,000 psi C.W.P.)
[Cold Working Pressure to
65.6ºC (150ºF)] (see
Pressure Temperature Chart)
Vacuum: 20 Micron
Saturated Steam:
10.3 bar (150 psi)
Body:
J-x
To Order Visit omega.com/bv70 for Pricing and Details
Brass 316 Stainless Steel
Model No. Model No. Size
BV71 BV71-SS ¹⁄₄
BV72 BV72-SS ³⁄₈
BV73 BV73-SS ¹⁄₂
BV74 BV74-SS ³⁄₄
BV75 BV75-SS 1
Comes complete with operator’s manual.
Ordering Examples: BV71, 1⁄4" brass valve.
BV74-SS, 3⁄4" 316 SS valve.