Connector Accessories
For Standard Size Connectors
OSTW-SC-T
shown
Connector
sold separately.
DX-BRLK
dual element
tube clamp.
SSRT-316-10
X-BRLK
tube clamp.
GST-SC-K
shown
Wire Caddy (Spool Cap)
Model No. Compatible Connectors
OSTW-SC-(*) USTW, OSTW, HSTW
GST-SC-(*) GST
*Insert thermocouple calibration: J, K, T, E, R/S, N or U (Uncompensated)
Tube Clamps (Single and Dual Element)
Model No. Compatible Connectors
X-BRLK-(*) USTW, OSTW, OGP, GST, HSTW, HGST, OTP
DX-BRLK- (*) USTW, OSTW, OGP, HSTW
*Insert probe diameter: “116” for 1⁄16", “18” for 1⁄8", “316” for 3⁄16", or “14” for 1⁄4"
Ordering Examples: X-BRLK-14, tube clamp for
DX-BRLK-14, dual tube clamp for
Standard Strain Relief Tubing
1
⁄4" probes.
1
⁄4" probes.
Model No. Compatible Connectors
SSRT-316-(*)
SSRT-18-(*)
SSRT-332-(*)
*Insert pkg quantity: Select from 5, 10, 50, 100
Center number denotes tubing inside diameter: “316” for 3⁄16", “18” for 1⁄8", “332” for 3⁄32"
OST, OSTW, HSTW, USTW, OGP,
OTP, GST, HGST, DTC
PCLM cable clamp.
C
Mounting holes
L
34.9 mm (1.375").
Requires 3.8 mm
(0.150") clearance
holes in panel.
SFCL safety clip.
RSACL round
hole panel
mounting
bracket.
SACL panel
mounting bracket.
Cable Clamps
Model No. Compatible Connectors
PCLM USTW, OSTW, OGP, HSTW, OTP
PCLM-DTC DTC
PCLM-GST GST, HGST
Ferrite Core Cable Clamps
Model No. Compatible Connectors
PCLM-FT OSTW, HSTW, OGP, HGST, GST, OTP
Safety Clips
Model No. Compatible Connectors
SFCL USTW, OSTW, OGP, GST, HSTW, HGST
Round Hole Panel Mounting Brackets
Model No. Compatible Connectors
RSACL USTW, OSTW, OGP, GST, HSTW, HGST
Panel Mounting Brackets
Model No. Compatible Connectors
SACL USTW, OSTW, OGP, GST, HSTW, HGST
TACL OTP
G-19
Connector Accessories
15.75
(0.62)
2.54
(0.10)
5.334
(0.120)
2.54
(0.10)
15.75
(0.62)
2.54
(0.10)
5.334
(0.120)
2.54
(0.10)
9.525
(0.375)
19.05
(0.75)
Rubber Boot – SRB
Rated to 95°C (203°F)
SRBS Rated to 230°C (446°F)
Rubber Boots
Model No. Compatible Connectors
SRB USTW, OSTW, OGP, HSTW
SRBS USTW, OSTW, OGP, HSTW
Crimp Style
Brass or SS
Bushing also
available
Style 1
2.54
(0.10)
15.75
(0.62)
2.54
(0.10)
5.334
(0.120)
Style 2
19.05
(0.75)
9.525
(0.375)
Dimensions: mm (inch)
ø = diameter
Crimp Style Bushing
To Order Visit omega.com/ostw-sc_stnd_con_acc for Pricing and Details
Style Dia A-ID Dia B Dia C-OD Dia D Dia E Compatible
Model Number Type mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) Connectors
(*)B-OST-CR1.5MM-(**) 1 1.57 (.062) 3.25 (.128) 2.94 (.116) N/A N/A
(*)B-OST-CR062-(**) 1 1.65 (.065) 3.25 (.128) 2.94 (.116) N/A N/A
(*)B-OST-CR2.0MM-(**) 1 2.05 (.081) 3.25 (.128) 2.94 (.116) N/A N/A
(*)B-OST-CR093-(**) 1 2.43 (.096) 3.25 (.128) 4.69 (.185) N/A N/A
(*)B-OST-CR3.0MM-(**) 1 3.09 (.122) 3.96 (.156) 4.69 (.185) N/A N/A
(*)B-OST-CR125-(**) 1 3.25 (.128) 3.96 (.156) 4.69 (.185) N/A N/A
(*)B-OST-CR4.5MM-(**) 2 4.59 (.181) 4.36 (.172) 6.35 (.250) 5.33 (.210) 1.77 (.070)
(*)B-OST-CR188-(**) 2 4.85 (.191) 4.36 (.172) 6.35 (.250) 5.33 (.210) 1.77 (.070)
(*)B-OST-CR5.5MM-(**) 2 5.58 (.220) 4.36 (.172) 7.87 (.310) 5.33 (.210) 1.77 (.070)
(*)B-OST-CR6.0MM-(**) 2 6.09 (.240) 4.36 (.172) 7.87 (.310) 5.33 (.210) 1.77 (.070)
(*)B-OST-CR250-(**) 2 6.42 (.253) 4.36 (.172) 7.87 (.310) 5.33 (.210) 1.77 (.070)
(*)B-DTC-CR250-(**) 3 6.09 (.240) N/A 7.87 (.310) N/A N/A
(*)B-DST-CR6.0MM-(**) 3 6.42 (.253) N/A 7.87 (.310) N/A N/A
Ordering Example: SB-OST-CR250-100, pkg of 100 crimp style stainless steel bushing for
0.250" diameter probe.
Style 3
OST, OSTW,
HST, HSTW,
GST, UST,
USTW, HFSTW,
OGP, OTP,
NOX, NHX,
NHHX, UHX
OST, OSTW,
HST, HSTW,
GST, UST, OGP,
HFSTW, USTW,
OTP, NOX, NHX,
NHHX, UHX
DTC
19.05
(0.75)
(*) Insert “B” for
brass or “S” for
stainless steel.
(**) Insert quantity:
“10” or “100”.
CR” number
indicates compatible
probe diameter.
To order crimping
tool for use with
these bushings,
specify model
number
BB-OST-CT.
G
Accessories for Cable Clamp Caps
Use with OSTW Standard Size Ultimate Connectors
OST-CC-TOOL shown
smaller than actual size.
Clamp Grommets Silicone 0.25" Long
Inside Dia Outside Dia Length Compatible
Model No. mm (inch) mm (inch) mm (inch) Connectors
SSRT-CC-018-(*) 3.18 (0.125)
SSRT-CC-332-(*) 2.38 (0.094)
SSRT-CC-116-(*) 1.59 (0.063)
4.77
(0.188)
6.35
(0.250)
SSRT-CC-132-(*) 0.79 (0.032)
Insert pkg quantity: select from 5,10, 50, 100.
*
Center number denotes grommet inside diameter for 0.75" long strain relief tubing
All assembly completed from top side.
Prep wire: Straight strip no loop necessary
1st: Load back plate and connector body
2nd: Terminate wire
3rd: Tighten 4 captive screws
Assembly Tool
Model No. Compatible Connectors
OST-CC-TOOL OST male or female
SMP-CC-TOOL SMP male or female
G-20
OSTW-CC
male or
female