Omega Products BAT-TJ36-24-12 User Manual
Rugged Transition Joint High-Temperature
Platinum Assemblies and Ceramic
A
Protection Tubes
Dimensions: mm (inch)
38
(1.50)
Fiberglass
insulated
lead wire
U NHX Standard Ceramic
Connector Rated to
650°C (1200°F)
U
HSTW Standard Connector
Liquid Crystal Polymer
Rated to 260°C (500°F)
U Up to 1650°C
(3000°F) Rating
U Oxidizing or Reducing
Atmospheres
U 1⁄4" Diameter High-Purity
Aluminum Protection Tube
U Standard Stripped
Leads Termination
U
1m (40") 24 AWG (0.020")
Solid Braided Fiberglass
Insulated Lead Wire
Available Options
U NIST Traceable Calibration
U Custom Probe Lengths
U
Thermocouple Connectors in
lieu of Stripped End Leads
U Dual Element
U Special Lead Lengths
U Lead Wire Configuration
Type R, S, or B Platinum
Thermocouple enclosed in a
high purity alumina protection
tube. Elements are insulated by
a double bore high-purity hardfired alumina insulator.
Optional compression fitting: select
the appropriate mounting thread
Model No. Description
1
SSLK-38-14
SSLK-38-38
⁄4 mounting thread
3
⁄8 mounting thread
27
(1.06)
3
⁄8" diameter
Spring strain relief
prevents “pinching”
of the wire
Comes standard
with stripped leads
RAT-TJ36-ST4-30-12-TT, shown
smaller than actual size.
RAT-TJ36-30-12, shown
smaller than actual size.
300 (12)
BX armored cable optional
Optional PFA
insulated lead wire
9
⁄16 diameter; probe assembly with a stainless steel
support tube and optional compression fitting
12" Length Standard
4" support
tube length
3
⁄8" dia
11⁄2
Optional compression fitting allowing field
positioning setting of the immersion length
11⁄8
To Order Visit omega.com/xta_w5r26 for Pricing and Details
Model No. Thermocouple Calibration AWG Wire Size
RAT-TJ36-30-12 Pt vs Pt 13% Rh 30
RAT-TJ36-24-12 Pt vs Pt 13% Rh 24
SAT-TJ36-30-12 Pt vs Pt 10% Rh 30
SAT-TJ36-24-12 Pt vs Pt 10% Rh 24
BAT-TJ36-30-12 Pt 6% Rh vs Pt 30% Rh 30
BAT-TJ36-24-12 Pt 6% Rh vs Pt 30% Rh 24
Probe assembly with a stainless steel support tube and optional
compression fitting allows field positioning setting of the immersion length
Model No. Thermocouple Calibration AWG Wire Size
RAT-TJ36-ST4-30-12 Pt vs Pt 13% Rh 30
RAT-TJ36-ST4-24-12 Pt vs Pt 13% Rh 24
SAT-TJ36-ST4-30-12 Pt vs Pt 10% Rh 30
SAT-TJ36-ST4-24-12 Pt vs Pt 10% Rh 24
BAT-TJ36-ST4-30-12 Pt 6% Rh vs Pt 30% Rh 30
BAT-TJ36-ST4-24-12 Pt 6% Rh vs Pt 30% Rh 24
Wire batch certificate reports available at no charge upon request; add suffix “-CERT” to model number.
To order other lead wire configurations or with lead wires over 1 m (40"): For SB or TTSB, add suffix
“-SB” or “-TTSB” to model number for additional cost. For lead lengths over 36", change the “36”
in the model number to desired length in inches for additional cost per additional foot to the 36"
price. For BX or TTBX, add suffix “-BX” or “-TTBX” to model number for additional cost. For lead
lengths over 36", change the “36” in the model number to desired length in inches for additional cost
per additional foot to the 36" price. For TT, add suffix “-TT” to model number, no additional charge.
For lead lengths over 36" standard braided fiberglass or TT , change the “36” in model number to
desired length in inches for additional cost per additional foot to the 36" price. Note: Type B is
26 AWG stranded.
To order other terminations: For miniature flat pin SMPW male connector, add suffix
“-SMPW-M” to model number for additional cost. For miniature flat pin SHX male ceramic connector,
add suffix “-SHX-M” to model number for additional cost. For standard round pin OSTW male
connector, add suffix “-OSTW-M” to model number for additional cost. For standard round pin male
ceramic connector, add suffix “NHX-M” to model number for additional cost.
Ordering Example: RAT-TJ120-30-18-TTBX-NHX-M, heavy duty transition joint high temperature
probe, Type R, 120" stainless steel BX armored cable over PFA Insulated lead wire, 30 AWG
(0.010"), 18" long high-purity aluminum protection tube, standard ceramic connector cold-end
termination with robust cable clamp attachment to the lead wire.
A-68
Loading...