Omega Products ACC-CB3-6 User Manual

HIGH-PERFORMANCE TRIAXIAL
ACCELEROMETERS

10 mV/g OUTPUT PER AXIS

ACC301A

U Ideal Vibration Monitoring in 3 (X-Y-Z) Axis
U Small Size and Lightweight
U For Use in Vehicles, Laboratories,

Industrial Applications

OMEGA’s ACC301A triaxial accelerometer is ideal
for lightweight single-point monitoring in 3 (X-Y-Z)
planes. This accelerometer has a very low noise floor
and a wide frequency range of up to 10 kHz. The
ACC301A weighs only 13.6 g (0.48 oz), yet its titanium
construction makes it very rugged.

SPECIFICATIONS

Excitation: 2 mA nominal @ 15 to 30 Vdc,

1 to 6 mA maximum constant current
Sensitivity @ 100 Hz, ±5%:

10 mV/g - 1.02 mV/(m/s²)

Frequency Range:
±5%: 3 Hz to 7 kHz

±10%: 2 Hz to 8 kHz
±3db: 1 Hz to 10 kHz

Turn on Time (2% of Final Bias):
<5 seconds

Amplitude Range @22°C (72°F): ±500 g
Mounted Resonance: >25 kHz
Transverse Sensitivity: <5%
Temperature Range:

-40 to 121°C (-40 to 250°F)

Base Strain: 0.0005 g peak/μstrain
Shock Limit: 5000 g
Noise Broadband 2.5 Hz to 25 kHz:

1500 µ (rms)

Noise Spectral:
10 Hz: 100 μg/sqrt Hz (rms)

100 Hz: 25 μg/sqrt Hz (rms)
1000 Hz: 10 μg/sqrt Hz (rms)

Output Impedance: 1000 Ω
Isolation: Isolated, >100 Meg Ω
Noise Rejection (EMI/RFI): >52 db
Bias Voltage: 7 Vdc
Weight: 13.6 g (0.48 oz) nominal

(without cable)

Case Material: Titanium
Design: Isolated compression
Environmental Seal: Splashproof epoxy
Dimensions: 21 H x 21 W x 28 mm D

(0.85 x 0.85 x 1.1")
Connector: Side 4-pin, ¼-28 female

termination, cable sold separately
(order Model No. ACC-CB3-6)

Mounting: 10-32 removable stud
Mounting Torque Maximum: 2.2 N-m

(20 in-lb)

Dimensions: mm (inch)

Actual size.

To Order Visit omega.com/acc301 for Pricing and Details

MODEL NO. DESCRIPTION
ACC301A Triaxial accelerometer
ACC-CB3-6 1.8 m (6') 4-conductor cable (male/male) required

Comes complete with operator’s manual.
Note: The compatible meters are for single input only. For multichannel instrumentation,

consult the Omega Pressure Department.

ACCESSORIES

MODEL NO. DESCRIPTION

MAGNET2 Magnetic mounting base (10 lb holding force)

19.1 Dia. x 19.1 mm high (0.75 x 0.75")

POWER SUPPLIES

ACC-PS4A Triaxial accelerometer power supply/amplifier

Interface cables used between power supply and instrumentation

ACC-CB4-15 4.6 m (15') coaxial cable (BNCM/BNCM)
ACC-CB5-2 0.6 m (2') coaxial cable (BNCM/banana plug)
ACC-CB6 178 mm (7") coaxial cable (BNCM/pigtail)
ACC-CB3-A 4-pin female/female adaptor

See omega.com for details on the above accessories.
Ordering Example: ACC301A, accelerometer, ACC-CB3-6, coaxial cable, ACC-PS4A,

power supply, (3) ACC-CB6, coaxial cables.

K-13

ACC-PS4A power supply

4-PIN 1/4-28

CONNECT

6.4

(0.25)

10-32 X 0.13"
TAPPED MOUNTING
HOLE

ACC301A shown with
ACC-CB3-6 cable, and
MAGNET2 magnetic
mounting base.

CUBE

Y

8.9

(0.35)

12.7

(0.50)

(TITANIUM)

Z

OR

X

7.19 DIA.
(0.25)

DYNAMIC MEASUREMENT

K