![](/html/2b/2b8f/2b8f5efc9c04eb50e6fcfc05ba331a771236f122caae1f8b39fee688ca2efd8f/bg1.png)
Unique Surface/Insertion Probes
88000 Series
TAS adaptor
All models supplied with a molded
SMP or SMPW subminiature male
connector and TAS adaptor.
Micro-sensor probe, designed for precise
measurements of small surface areas, such as
transistors and integrated circuits. Small contact
surface area of 1.0 x 3.0 mm (0.040 x 0.118")
for fast response. 400°C (750°F) max
surface temperature.
Note: element not replaceable.
Model No. 88008(*)
Model No. 88014(*)
Right angle version of the 88013. Fast-
response spring-loaded compact tip probe, for
measurements to 815°C (1500°F). Surface pad
made from 400 series stainless steel. 4.75 mm
dia. (0.187") surface area. Not designed for
long-term exposure to high temperatures.
Note: element not replaceable.
Fast-response spring-loaded compact tip probe, for
measurements to 815°C (1500°F). Surface pad made from
400 series stainless steel. 4.75 mm diameter. (0.187")
surface area. Not designed for long-term exposure to high
temperatures. Note: element not replaceable.
Model No. 88104(*)
Right angle version of the 88008, with
unique lateral spring design and small
contact surface area. 400°C (750°F)
max surface temperature.
Note: element not replaceable.
Model No. 88013(*)
Visit omega.com for
dimensions.
All models
shown smaller
than actual size.
Model No.
88307(*)
Longer version
of the 88306, with
300 mm (12") sheath.
Note: element not replaceable.
Model No. 88305(*)
Measure temperatures in moving air, with drilled sheath
to protect the thermocouple, while exposing it to air flow.
0.5 to 20 second response time (depending on air
velocity). 480°C (900°F) max service temperature.
Note: element not replaceable.
Specify Calibration K or E.
*
A-103
![](/html/2b/2b8f/2b8f5efc9c04eb50e6fcfc05ba331a771236f122caae1f8b39fee688ca2efd8f/bg2.png)
Model No. 88306(*)
Pointed tip design, ideal for
measuring soft and semi-frozen
material, molten plastics and
rubbers. 102 mm (4") sheath,
with 6 to 20 seconds response
time. 500°C (930°F) max
service temperature.
Note: element
not replaceable.
All models
shown smaller
than actual size.
A
Visit omega.com for
dimensions.
Model No. 88301(*)
Suitable for measuring internal
temperatures of semi-solid
materials, such as rubbers,
plastics, clay, etc., as well
as for liquid measurements.
Tapered stainless steel sheath
with 480°C (900°F) maximum
service temperature.
Note: element not replaceable.
Ordering Example: 88009E,
style 88009 probe in Type E
thermocouple.
Model No. 88308(*)
Specially designed fine hypodermic needle
probe, least likely to disturb the surrounding
insertion area. 6 to 20 second response time,
205°C (400°F) max service temperature.
Note: element not replaceable.
All models supplied
with a molded SMP or
SMPW subminiature
male connector and
TAS adaptor.
TAS adaptor
Miniature connector.
Model No. 88009(*)
Thin-body type probe designed to measure the surface of the bottom of narrow
gaps or slits, like that of a plate heater. 260°C (500°F) max service temperature.
Note: element not replaceable.
All 88000 series probes are supplied with retractable cable
[expands to 1.5 m (5')] and male subminiature connector.
A-104
Specify Calibration:
*
K: CHROMEGA®-ALOMEGA®
E: CHROMEGA-Constantan
Specify Calibration K or E.
*