Page 1
Specialty Thermocouple Probes
Heavy-Duty Penetration Probe
88313(*)
U Grounded Junction
This “T-bar construction” style probe is made from
304 SS to insure long term performance. Possible
uses include the frozen food industry, or any
industrial application where penetration is needed.
Standard RSC coiled cable stretches to 1.5 m (5').
The sensing element is 1⁄4" OD and 203 mm (8") long.
Temperature range is from sub-zero to 425°C
(800°F) for Type E, to 480°C (900°F) for Type K.
Specify thermocouple Type: J, K, T, E.
*
“Tee-Style” Penetration Probe
88311(*)
Penetration Tip
Specify calibration:
*
K or E
88312(*)
Threaded Tip
Specify calibration:
*
K or E
Shown
smaller than
actual size.
U Grounded Junction
Penetration and machine threadedtip probes with new Tee-style
304 stainless steel handle are ideal
for industry use or frozen food
applications. The probe’s 304 SS
thick wall tube ensures strong
and rigid performance. Each
probe comes with 305 mm (1') of
RSC cable that stretches to 1.5 m
(5') and a male miniature connector.
The probe features a 6.4 mm (0.25")
diameter, with a 250 mm (10")
immersion length from the tip to
handle. The handle is 75 mm (3")
in length. Maximum temp rating:
480°C (900°F) for Type K, 425°C
(800°F) for Type E.
Fine Tip TJ Probe
TJFT72
3.2 mm to 2.4 mm
(0.13 to 0.09")
TJFT72-(*)-(**)-116G-6-SMPW-M
Miniature Connector
250 mm (10")
Covered by U.S. and International patents and pending applications.
88312 features a threaded tip. Shown actual size.
1
-20 threads
⁄
4
Shown smaller than actual size.
Fine tip transition joint thermocouple, 150 mm (6")
long, with 304 SS sheath, 1⁄16" OD. Supplied with 1.8 m (6')
PFA insulated wire with SMPW subminiature male connector.
Tip has a 0.5 mm (0.020") diameter sensing mass.
Specify calibration: J, K, T or E
*
Specify sheath: SS (for 304 Stainless
**
steel) or INC (for Inconel 600)
Consult sales for 316 SS sheath
Miniature connector.
Ordering Example:
TJFT72-K-SS-116G-6-SMPW-M, type K,
304 SS sheath.
A-87
Shown
smaller than
actual size.
Shown actual size.
Page 2
Specialty Thermocouple Probes
Low-Profile Penetration Probe
6.4 mm (0.25")
88310(*)
Specify calibration: K or E
*
This probe
features a low-profile
hypodermic tip and
convenient handle for
short depth penetration of
soft materials such as rubber.
A grounded junction, 300 mm (1') of
retractable cable [which stretches to
1.5 m (5)] and a subminiature male
connector are standard. The handle
is rated to 162°C (325°F).
Autoclave Probe
This 1.6 mm (0.063") diameter
304 SS probe, with stainless
steel transition junction, is
perfect for the food industry,
steam washdown applications
or general heavy duty use.
It features 3.3 m (11') of
1.6 mm (0.062") mineral
insulated coiled cable, 1 m (3')
of PFA insulated thermocouple
grade wire and a male
subminiature connector.
Shown smaller than actual size.
TJ36-(*)-116G-6-ACL
Grounded Junction
Specify calibration: J, K, T or E
Miniature
Connector
6.4 mm
(0.25")
diameter
*
Molded
miniature
connector.
6.4 mm (0.25") diameter
100 mm
(4")
TJ36-(*)-116U-6-ACL
Ungrounded Junction
Coil can be stretched or
compressed by hand.
Shown smaller
than actual
size.
A
Epoxy Coated
Tip Thermocouple
TC-PVC-(*)-24-180
Purchase PVC insulated
thermocouples with epoxy
sealed junction tip either
singly or in a pack of five.
Supplied in 4.5 m (15’) lengths†
per sensor with subminiature
male window connector and
24 gage solid polyvinyl rip-cord wire.
Maximum temperature rating of
105°C (221°F). Stripped leads available**.
†
Other lengths available, consult Sales Department
Miniature connector
with write-on-window.
5TC-PVC-(*)-24-180
Specify calibration: J, K, T or E
*
**For stripped leads add suffix “-SE”
to model number for an additional cost.
A-88
Shown
actual size.
Loading...