Omega Products 2108-650-RA-1 User Manual

High Speed Industrial Fiber Optic Infrared Transmitter
Small Spot
OS4000 Series
U Temperature Ranges
From 100 to 1600°C (212 to 2912°F)
U Very Fast Response Time
of 1 msec
U 3 Standard Optical Field
of Views
U
4 Standard Fiber Optic
Cable Lengths, 0.3, 0.9, 1.8, and 3 m (1, 3, 6, and 10')
U Emissivity Adjustable
from 0.05 to 0.99
U
4 Standard Analog Outputs
U
Low and High Alarm Voltage Outputs
U RS232 PC Interface with
Windows® Based Data Logging Software
U Peak-Hold and Sample-
Hold Functions
U Built-In Laser Sighting For Target Alignment
U Mounting Bracket
and Mounting Nuts are Included
U Polymer Bolt Fiber Optic
Assemblies Available
U Glass and Quartz
Tip Fiber Optic Cable Assemblies Available
U Optional Water Cool
Jacket Accessory
U Optional Built-In
Relays with Contact Closure Output
U Optional Custom Optical
Field of Views and Temperature Ranges
Size!
OS4001-V1 transmitter shown smaller than actual size.
The OS4000 Series industrial fiber optic transmitter measures temperature ranges from 100 to 1600°C (212 to 2912°F) using nine fiber optic lens probes, three polymer bolt probes, and twelve glass and quartz tip assemblies. This series offers many standard features such as adjustable emissivity, linear analog output, high and low alarm voltage output, RS232 PC interface, built-in laser sighting, and more. Through Windows based PC interface software, the user can select response time, peak-hold function, high and low alarm set points, and data logging. The OS4000 series is packaged in a space saving
63.5 OD x 152.4 mm (2.5 x 6") long.
Specifications
Power: 15 to 24 Vdc Temp Range: 100 to 1600°C
(212 to 2912°F)
Accuracy: 1% of rdg Lens Probe Optical Field of Views:
5.6 @ 203 mm (0.22 @ 8")
2.2 @ 127 mm (0.086 @ 5")
0.63 @ 51 mm (0.025 @ 2") Fiber Optic Cable Lengths:
0.3, 0.9, 1.8, 3 m (1, 3, 6, 10')
Emissivity: 0.05 to 0.99 adjustable Time Constant (0 to 63% Final Value):
1 msec (default) up to 3.2 (programmable via PC software)
Peak and Hold: Programmable via PC software Holding Time: 1 to 60 seconds
seconds
J-85
L1-2-6-3 lens probe assembly sold separately.
Sample and Hold: Programmable via
PC software Holding Time: 25 msec to
3.2 seconds
Spectral Response: 1.2 to 2.6 microns Infrared Detector: InGaAs photo
detector Analog Output: 0 to 5 Vdc, 0 to 10 Vdc,
4 to 20 mA, 1 mV/Deg
PC Communication: RS232, 2-way Alarm Set Points: High and low
programmable via PC software Alarm Output: Two voltage outputs,
30 mA drive Optional Built-in Relay:
Two 10A @ 24 Vdc SPST NO relays (high and low)
Operating Ambient Temperature: Transmitter: 0 to 50°C (32 to 122°F) Fiber Optic Lens Assembly: 0 to 150°C (32 to 302°F) Polymer Bolt Probe: Tip (425°C max), bolt (150°C) Glass Tip Assembly: Tip (425°C max), fiber junction (150°C) Quartz Tip Assembly: Tip (1000°C max), fiber junction (150°C)
Glass or Quartz Rod Diameter: 0.080" Glass Tip Field of View: 1.2 (distance
to spot size) Quartz Tip Field of View: 1.8 (distance
to spot size)
Laser Sighting
Maximum Laser Power Output:
Less than 1 mW Laser Beam Wavelength (Color):
650 nm (red)
FDA Classification: Class II European Classification: Class 2 Beam Diameter: 5 mm (0.20") Dimensions:
Transmitter: 63.5 OD x 152.4 mm L
(2.5 x 6") Lens Probe: 25.4 OD x 190.5 mm L (1 x 7.5")
Weight: 900 g (2 lb)
!
OUTPUT 1mW, WAVE LENGTH
630-670 nm, CLASS II (2) LASER PRODUCT.
COMPLIES WITH FDA 21 CFR 1040.10 & EN 60825
TEMPERATURE
LASER RADIATION
DO NOT STARE INTO BEAM
CAUTION
FIBER OPTIC PORT
LASER SIGHTING PORT
AVOID EXPOSURE
LASER RADIATION
IS EMITTED FROM
THIS APERTURE
OS4001 Front View
M
a
d
e
I
n
U
S
A
o
m
e
g
a
.
c
o
m
SET
LASER
MODE
GAIN
EMISSIVITY
OS4000 SERIES
LOW
ALARM
HIGH
ALARM
HIGH ALARM
RELAY 10 A@24 VDC
LOW ALARM
RELAY 10 A@24 VDC
POWER
POWER/OUTPUT
CONNECTOR
EMISSIVITY
DIAL
FIBER OPTIC GAIN ADJUST
LOW ALARM
LED INDICATOR
HIGH ALARM
LED INDICATOR
LASER POWER LED INDICATOR
POWER
LED
INDICATOR
RELAY CONTACT CLOSURE
TERMINAL
BLOCKS
(OPTIONAL)
BACK PLATE
STANDARD
9
5
--
+
+
Front plate with laser certification label
OS4001 Back View
Back plate
PC Interface Software
The OS4000 series comes with a Windows® based PC interface software. The software runs on Windows 2000, XP and Vista. The software allows the user to do the following:
• EstablishcommunicationwiththeOS4001 and display temperature in real time both digitally and graphically
Main PC Software Menu
• Selectsound,COMport,andtemperature
engineering unit
• Selecttheresponsetime,andhighandlowalarm
set points, and peak hold functions
• Selectchartscaleeithermanualorautomaticand
chart time base
• Displaythetemperaturevs.timealongwithhighand
low alarm lines
• Savethetemperaturedatatoafile
Settings Menu
J
2615-G-3-2650-6 glass tip fiber cable assembly sold separately.
OS4001-V1 transmitter connected to a glass tip fiber cable assembly.
All shown
smaller than
actual size.
OS4000-WC water cool jacket sold separately.
J-86
Loading...
+ 2 hidden pages