Omega Digitech M202 User Manual
M202
HD encoder
DVBT modulator
HDMI loop
USER MANUAL
M202
Congratulations on your purchase of the M202!
This ‘state of the art’ product, is a HD encoder. The video and audio input or taken
from HDMI. The HDMI input signal is passed to the HDMI out connector.
After compressing the video into H264 and audio in AAC or MPEG1-L2, the output is
available as DVB-T signal.
USER MANUAL
Stand-alone confi
menu’s. To make the configuration of the M202 ultra simple, a special software ia
available that you can download it from our wbsite www.onetrade.gr
guration is made easy through 3 tact switches and ergonomic
Contents
1 - Safety considerations .............................................................................3
2 - Description of the different elements ........................................................4
3 - Software settings : ................................................................................5
3.1 - Quick menu : .....................................................................................5
3.2 - Advanced menu..................................................................................6
4 - Programming using a PC ........................................................................8
5 - Technical specifications ..........................................................................8
Ωmegadigitech ©2018
PAGE 2
M202
USER MANUAL
1 - Safety considerations
1.1 CONNECTING TO THE MAINS SUPPLY
This product has to be connected to the mains supply. If there is the slightest doubt concerning the
type of connection available on the installation, please contact your supplier of electricity. Before carrying out maintenance operation or modifi cation of the installation, the modulator has to be discon-
nected. Remark : only use the supplied power adaptor.
1.2 OVERVOLTAGE
An overvoltage on the mains supply,can cause shortcircuits or fi re. Never overload the power lines.
1.3 LIQUIDS
This module should be protected from splashes. Please assure yourself that no containers containing
liquids are placed on this module. Also be aware of other persons splashing liquids on the module.
1.4 CLEANING
Disconnect the module before cleaning. Use only a humid cloth without solvant.
1.5 VENTILATION
In order to assure an adequate air circulation and to prevent overheating, the ventilation holes should
not be obstructed. The module may not be installed in a hermetically sealed environment. Other electronic products or heat producing items may not be placed upon or near the module.
1.6 ACCESSORIES
The use of accessories not manufactured by the manufacturer can cause damage to the module.
1.7 INSTALLATION OF THE MODULE
The module must be installed in a place well protected from direct sunlight. All measures have to be
taken to avoid installation in humid or sunny place.Do not install near heating elements or other devices producing heat. Assure yourself that the module is placed at least 10 cm from other equipment with
is susceptible to electromagnetic radiation. Do not install the module on instable items. A fall can cause
physical or material damage.
Ωmegadigitech ©2018
PAGE 3
Loading...