Omega Altise OAPC1213, OAPC1413 User Manual

PORTABLE AIR CONDITIONER

OAPC1213

OAPC1413

1

__

SAFETY INSTRUCTIONS & CAUTION__

• Read all instructions carefully and keep this manual for future reference.

• For indoor use only.

• This appliance is designed for home air conditioning and must not be used for other purposes.

• It is dangerous to modify the appliance in any way.

• Switch off and unplug when not in use

• If the appliance requires repair, contact a Service centre suggested by the manufacturer. Repairs

carried out by unauthorised personnel may be dangerous.

• If the power cable is damaged, it must be replaced by a qualified professional authorised by the

manufacturer.

• The appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

• Before cleaning or maintenance, always unplug the appliance from the mains socket.

• Do not move the appliance by pulling the power cable.

• Do not rest heavy or hot objects on top of the appliance.

• Always transport the appliance upright.

• Do not place objects on the unit or block the air inlet / outlet

• To avoid electric shock, do not place the cord, the plug or the appliance in water or other liquids.

• Do not insert fingers or other objects into the air conditioner during operation.

2

__ DESCRIPTION___

1. Control panel 5. Filter

2. Air outlet grills 6. Evaporator air intake grill

3. Castors 7. Air exhaust hose housing

4. Handles 8. Condensate drain connection

9. Power Cable

10. Flange with cap 14. Castor locks

11. Suction caps 15. Remote control

12. Air exhaust hose 16. Window Slider

13. Window outlet

3

_

_ PREPARING FOR USE __

ELECTRICAL CONNECTIONS

Before plugging the appliance into the mains socket, please check:

•The mains power supply corresponds to the value indicated on the rating plate on the back of the
appliance;

•The mains socket and electrical circuit are adequate for the appliance;

The instructions below will enable you to prepare your air conditioner for operation as efficiently as
possible. Before use, make sure the air Intake and outlet grills are not obstructed.

AIR-CONDITIONING WITHOUT INSTALLATION

1. Fit the air exhaust hose [12] in the housing

[7] at the back of the appliance. Insert it as shown in figure A.

For optimum results:

If you have a sash window, place the bracket [16] on the window sill

extend the bracket fully within the window frame, fix the bracket

by using the pin then lower the window onto the bracket.

Insert the window outlet [13] of the exhaust hose [12] into the

slot, then connect the hose to the air conditioner (fig. B).

4

_

_ PREPARING FOR USE __

AIR-CONDITIONING WITHOUT INSTALLATION Cont.….

French window

•

Open the French window slightly and position the outlet [13] as shown in figure c.

Use the suction pads provided to hold the two parts of the window together (fig. D).

Keep the air hose as short and free of
curves as possible to avoid constrictions.

5