Omega OSXL-A5SC, OSXL-SC User guide

OMEGAnet®Online Service Internet e-mail

omega.com [email protected]

User’s Guide

Shop online at

omega.com

e-mail: [email protected]

For latest product manuals:

omegamanual.info

OSXL-A5SC-A15SC-A35SC

Thermal Imager Sensor

®

U.S.A.: Omega Engineering, Inc., One Omega Drive, P.O. Box 4047

ISO 9001 Certified Stamford, CT 06907-0047

Canada:

For immediate technical or application assistance:

U.S.A. and Canada:

Mexico/ TEL: [phone] FAX: [phone]
Latin America e-mail: [email protected]

China: 1698 Yi Shan Road, Unit 102

It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its
products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.

The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, human applications.

OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of
purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover
handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.

If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return
(AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or
replaced at no charge. OMEGA’s WA RRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to
mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is VOID if
the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current,
heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control.
Components in which wear is not warranted, include but are not limited to contact points, fuses, and triacs.

OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility for any
omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information
provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified
and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR
IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth
herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence,
indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no
event shall OMEGA be liable for consequential, incidental or special damages.

CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC),
used in or with any nuclear installation or
nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our
basic WARRANTY / DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or
damage whatsoever arising out of the use of the Product(s) in such a manner.

Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY PRODUCT(S) TO
OMEGA, PURCHASER MUST OBTA IN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN
ORDER TO AV OID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any
correspondence.

The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.

FOR WARRANTY
available BEFORE contacting OMEGA:

1. Purchase Order number under which the product was PURCHASED,

2. Model and serial number of the product under warranty, and

3. Repair instructions and/or specific problems relative to the product.

OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and
engineering. OMEGA is a registered trademark of OMEGA ENGINEERING, INC.

© Copyright 2012 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or reduced to any
electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.

Servicing North America:

Toll-Free: 1-800-826-6342 Tel: [phone]
FAX: [phone] e-mail: [email protected]

976 Bergar
Laval (Quebec), H7L 5A1, Canada
Toll-Free: 1-800-826-6342 TEL: [phone]
FAX: [phone] e-mail: [email protected]

Sales Service: 1-800-826-6342/1-800-TC-OMEGA
Customer Service: 1-800-622-2378/1-800-622-BEST
Engineering Service: 1-800-872-9436/1-800-USA-WHEN

Servicing Asia:

Min Hang District
Shanghai, China 201103 P.R.C.
Hotline: [phone]
e-mail: [email protected]

®

®

WARRANTY/ DISCLAIMER

activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any

RETURN REQUESTS/INQUIRIES

RETURNS, please have the following information

Benelux: Toll-Free: 0800 099 3344 TEL: [phone]

Czech Republic: Frystatska 184

France: Toll-Free: 0805 541 038 TEL: [phone]

Germany/ Daimlerstrasse 26,
Austria: D-75392 Deckenpfronn, Germany

®

United Kingdom:

ISO 9001 Certified

FOR NON-WARRANTY REPAIRS,
charges. Have the following information available BEFORE contacting
OMEGA:

1. Purchase Order number to cover the COST of the repair,

2. Model and serial number of the product, and

3. Repair instructions and/or specific problems relative to the product.

Servicing Europe:

FAX: [phone] e-mail: [email protected]

733 01 Karviná, Czech Republic
TEL: [phone] FAX: [phone]
[email protected]

FAX: [phone] e-mail: [email protected]

Toll-Free: 0800 8266342 TEL: [phone]
FAX: [phone] e-mail: [email protected]

OMEGA Engineering Ltd.
One Omega Drive,
River Bend Technology Centre
Northbank Irlam
Manchester M44 5BD United Kingdom
Toll-Free: 0800-488-488 TEL: [phone]
FAX: [phone] e-mail: [email protected]

consult OMEGA for current repair

FLIR Ax/Ax5 series

The new standard in thermal
machine vision cameras

The FLIR Ax/Ax5 series cameras have features and
The FLIR Ax/Ax5 series cameras have features and

functions that make them the natural choice for anyone
who uses PC software to solve problems. Available
resolutions include 80 × 64, 160 × 128, and 320 × 256
pixels.

Among their main features are GigE Vision and GenICam
compliance, which makes them plug-and-play when
used with software packages such as IMAQ Vis
Halcon.

Key features:

Very affordable•
Compact (40 × 43 × 106 mm/1.57 × 1.69 × 4.17 in.)•
GigE Vision and GenICam compliant•
GigE Vision lockable connector•
PoE (power over Ethernet)•
8-bit monochrome image streaming•
14-bit radiometric image streaming•
High frame rates (60 Hz)•
Synchronization between cameras possible•
1x+1x GPIO•
Compliant with any software that supports GenICam, •
including National Instruments
mers Common Vision Blox, and COGNEX Vision Pro
Lenses: 5°, 9°, 13°, 19°, and 25° (model-dependent)•

IMAQ Vision, Stem-

ion and

Typical applications:

Automation, thermal machine vision•
Entry-level “high-speed” R&D•

http://www.flir.com
http://support.flir.com

P/N: T559792-A

FLIR P/N T198367

FLIR P/N T198349

FLIR P/N T911098