Omega OS530HRE, OS530LE, OS523E, OS532E, OS534E User Manual

...

QUICK START

AVOID EXPOSURE

LASER RADIATION

IS EMITTED FROM

THIS APERTURE

LASER RADIATION - DO NOT STARE INTO BEAM

OUTPUT <1 mW, WAVELENGTH 630-670 nm CLASS II (2) LASER PRODUCT, COMPLIES WITH FDA 21CFR 1040.10 & EN60825-1/11.2001

OMEGASCOPE

CAUTION

Warning and

Certification

Label

OMEGASCOPE

Handheld Infrared Thermometer

PATENT NOTICE This product may be protected by one or more of the following patents: U.S. PAT. D357,194; B1 5,368,392; 5,524,984; 5,727,880; 5,465,838; 5,823,678; 5,823,679; 6,123,453; 6,267,500 B1; 6,341,891 B1; 6,377,400 B1; 6,540,398 B2 ; 6,614,830 B1; 6,633,434 B2; 6,659,639; / Canada 2,114,806; 2,116,055; 75811 D OMEGA ENGINEERING, INC./ Czech Republic 25372/ France 2 756 920; 2 767 921; 2,773,213; 0378411 to 0378446; 2 773 213 B1 / Germany M 94 06 478.4; G 94 22 197.9; G 94 22 203.7/ Italy RM940000913/ Japan 988,378/Holland 1007752; 25009-00/ Spain mod. ut. 0133292/ Slovak Republic 24565/ U.K. Registered 2041153; 9726133.3/ EPO 0 644,408 B2; EP 1 085 307 A1. Other U.S. and Foreign Patents Pending. Other U.S. and International Patents Pending.

MQS4088-0207

OS530LE OS532E OS533E OS534E OS530HRE OS53x-CF OS523E OS524E

WARRANTY/DISCLAIMER

OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 25 months from date of purchase of the base unit and 13 months from date of purchase on Laser Sight Module. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.

If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA's WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear are not warranted, include but are not limited to contact points, fuses, and triacs.

OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use if its products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.

CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic WARRANTY/DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.

RETURN REQUESTS/INQUIRIES

Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence.

FOR WARRANTY

RETURNS, please have the following information available BEFORE contacting OMEGA:

1. Purchase Order number under

which the product was PURCHASED,

2. Model and serial number of

the product under warranty, and

3. Repair instructions and/or

specific problems relative to the product.

FOR NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:

1. Purchase Order number to cover the COST of the repair or calibration,

2. Model and serial number of the product, and

3. Repair instructions and/or specific problems relative to the product.

OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering.

This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.

Shown with Built-in Distance Measuring Option and Digital Video Camera Attachment

Functional Flow Chart when the Trigger is Pulled (Real Time Mode)

Press to... to...

Press or to...

FUNC

LOCK

DISPLAY

MODE:

Press

Display shows:

Emissivity

Go to

Set Emissivity

Current temperature Lock or unlock

Distance (feet or meter)

Go to

Trigger LCK

Current temperature

Laser status

Go to

Set laser to

Current temperature Flashing or On

Maximum temperature

Go to

Press to turn on/off

Current temperature LCD backlight

Minimum temperature

Go to

Current temperature Reset Maximum, Press to change

Differential temp

Go to

Minimum, Diff.

from °F to °C or feet to meter

Current temperature

Average temps and vise versa

Average temperature

Go to

Current temperature

High alarm set point

Go to

Enable/Disable

Set High Alarm set point

Current temperature HAL

Thermocouple temp

Go to

–––––– Turn on LCD Back lite

Current temperature Change °F to °C

Low alarm set point

Go to

Enable/Disable

Set Low Alarm set point

Current temperature LAL

Ambient target temp

Go to

Enable/Disable

Set Ambient Target temp

Current temperature ATC

Data Trans. Interval

Go to

Enable/Disable

Set Data Transmission

Current Temperature PRN interval (Logging)

Memory location

Go to Store temp data –––

Current temperature

Logging

Go to

Turn on/off

–––

Current temperature Logging

Real Time Modes

NOTE: The unit of measure (°F or °C) flashes during Real Time Mode.

OS530LE, OS530HRE

OS532E

OS533E

OS534E, OS523E, OS524E

LCK

LAL

ATC

PRN

MODE MODEDISPLAY DISPLAY

☞

LCK

☞

LCK

HAL

☞

LCK

☞

LCK

(Models OS530LE,

OS530HRE)

(Models OS534E, OS523E, OS524E)

(Model OS533E)

(Model OS532E)

FUNC

It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.

The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.

WARNING: These products are not designed for use in, and should not be used for, patient connected applications.

CAUTION

• There should be a clean, open line of sight from the distance device to the target, otherwise an erroneous reading will result.

• For accurate distance measurement readings, the surface must be hard, flat, and reflective to ultrasonic pulse.

• Distance measurement can not be taken through glass, or off of soft and padded surfaces, or through smoke or fog.

• The distance measurement unit must be held perpendicular to the target surface.

• The distance measurement unit is designed for indoor use only.

• Accuracy of the distance measurement unit will vary depending on environmental conditions.

• Do not aim the distance measurement unit.

OMEGAnetSMOn-Line Service Internet e-mail

omega.com info@omega.com

Servicing North America:

USA: One Omega Drive, P.O. Box 4047

ISO 9001 Certified

Stamford CT 06907-0047 Tel: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com

Canada: 976 Bergar

Laval (Quebec) H7L 5A1 Tel: (514) 856-6928 FAX: (514) 856-6886 e-mail: info@omega.ca

For immediate technical

or application assistance:

USA and Sales Service: 1-800-826-6342/1-800-TC-OMEGA

Canada: Customer Service: 1-800-622-2378/1-800-622-BEST

Engineering Service: 1-800-872-9436/1-800-USA-WHEN

Mexico: En Espan˜ol: (001) 203-359-7803

e-mail: espanol@omega.com FAX: (001) 203-359-7807 info@omega.com.mx

Servicing Europe:

Czech Rudé armády 1868, 733 01 Karviná 8 Republic: Tel: +420 (0)69 6311899

FAX: +420 (0)69 6311114 Toll Free: 0800-1-66342 e-mail: czech@omega.com

Germany/ Daimlerstrasse 26, D-75392 Deckenpfronn, Germany Austria: Tel: +49 (0)7056 9398-0

FAX: +49 (0)7056 9398-29 Toll Free in Germany: 0800 639 7678 e-mail: germany@omega.com

United One Omega Drive, River Bend Technology Centre Kingdom: Northbank, Irlam, Manchester

ISO 9002 Certified

M44 5EX United Kingdom Tel: +44 (0)161 777 6611 FAX: +44 (0)161 777 6622 Toll Free in United Kingdom: 0800-488-488 e-mail: sales@omega.co.uk

For latest product manuals: omegamanual.info

Using this Quick Start Manual

Use this Quick Start Manual with your OS530E/ OS520E series Handheld Infrared Thermometer to set up and perform basic operations. These tasks are:

• Installing the Batteries

• Operating the Laser Sight

• Taking Temperature Readings

• Measuring Distance For detailed information, refer to the

User’s Guide (M4088).

Getting Started

Parts of the Thermometer

Figure 5. Two Laser Configurations

The thermometer is ready for operation.

Taking Temperature Readings

1. Aim at the target. If you are not using the Laser Sighting, use the “V” groove on top of the thermometer to align the target to the thermometer’s field of view.

Figure 6. Field of View Positions

2. Pull and hold the trigger. To use the laser sighting, set the laser power switch to the ON position. The Power Indicator LED and the laser beam will turn on. The laser beam will stay on as long as the trigger is pulled. The target temperature and emissivity (E) will be displayed

on the LCD. You can press the

and

key to increment or decrement the target emissivity. The laser beam is switchable between dot and circle using the switch on the right side.

Measuring Distance

Distance measurement is offered either as field mountable or built-in. The field mountable version

(HH-DM) is a stand alone device. Press the key to measure distance. The build-in version (-DM) is an integral part of the thermometer. Go to the d_F or d_M display menu. Set the power switch on the distance module to the ON position. Pull the trigger for about 2 seconds. The upper display will show the distance in feet or meters. Releasing the trigger will turn off distance measurement.

Field of View

Target

(ACCEPTABLE)

(UNACCEPTABLE)

2 Types of Laser Beams

Laser Dot

Laser Circle

START HERE

Figure 3. Display and Keypad View

Installing the Batteries

Invert the unit and install 4 fresh AA size batteries as shown in Figure 4.

Figure 4. Installing the Batteries

Operating the Laser Sight Function

WARNING: DO NOT AIM THE LASER BEAM AT

ANYONE’S EYES.

FUNC LOCK

OMEGASCOPE

LCK

HAL

LOBAT

ATC

LAL

PRN

°F °C

“V” Groove

Lens Rubber

Boot

Built-in

Distance Module

(Optional)

Distance

Power

Switch

Trigger

Battery

Compartment

Door

Tripod Mount

Digital/Video Camera (Optional)

Display Rubber Boot

Backlit LCD

Wrist Strap

Figure 1. OS530E/OS520E Series Handheld Infrared

Thermometer Front View

Figure 2. OS530E/OS520E Series Handheld Infrared

Thermometer Various Views

Laser

Dot/Circle

Switch

Laser Power Switch

Laser Beam Aperture

Thermocouple Input Socket (SMP) (standard on OS532E, OS533E, OS534E)

ac Adapter Input Jack

Analog Output Jack (1mV/deg)

RS-232 Phone Jack (standard on OS533E, OS534E, OS523E, OS524E)

CAUTION: Use of controls or adjustments or performance of procedures other than those specified here may result in hazardous radiation exposure. Refer to the Operator’s Manual for complete warnings and cautions.