INSTALLATION, OPERATION
AND MAINTENANCE INSTRUCTIONS
Gas Cooktops
OCG60X,
OCG64X
CONGRATULATIONS
Welcome to the Omega Kitchen Community and thank you for choosing one of our many
fantastic cooking appliances. We are confident that you will now be able to meet your cooking
needs. Before you use the cooktop we strongly recommend that you read though the whole
user manual which provides the description of this product and the proper use of its functions.
To avoid the ever-present risks involved with using an electrical appliance it is vital that the
appliance is installed correctly by an authorised person and that you read the safety
instructions carefully to avoid misuse and hazards.
It is important that you retain these instructions and your proof of purchase along with any other
important documents about this product for future reference. Due to continual product
development, Omega reserves the right to alter specifications or appearances without notice.
CONTENTS
SECTION PAGE NO.
Important Safety Instructions 3
Appliance Details 4
Gas Connections 5-6
Electrical Connections 7
Installation 7-8
Operating Instructions 9
Cleaning 9-10
Before operating your appliance for the first time, take care that the appliance has been correctly
installed into a fixed workbench, that all electrical and gas connections have been completed,
that all removable parts (trivets, burner parts etc) are in position and any transit protection has
been removed.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT: Read the assembly instruction section and safety precautions of this
booklet carefully before removing the contents of this carton.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience or knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety. Children
should be supervised to insure that they do not play with the appliance.
2. In certain circumstances electrical appliances may be a safety hazard. The unit MUST be connected
to the electrical supply before operation to enable the electronic ignition to work.
3. Do not place heavy objects on this appliance.
4. Damage can occur to bench tops if pots and pans are able to overlap the bench top. This can result in
heat being transferred to the bench top. Ensure that correct sized pots & pans are used. Refer to guide in
booklet.
5. Do not allow pot handles or utensils to be placed near gas burners which are operating, as they can
cause the handles to become hot to touch. Always turn handles away when small children are nearby. It
is recommended that children are kept away from the cooktop at all times.
6. If the electrical supply cord is damaged, either when being installed or after installation, it must be
replaced by the manufacturer, it’s service agent or similarly qualified persons in order to prevent a
hazard.
7. The electrical and gas connections must be accessible after installation.
8. Electrical connection must be made as per local wiring rules and regulations.
9. Ensure that the kitchen is well ventilated or mechanical ventilation is in use while cooking on the gas
cooktop.
10. DO NOT USE OR STORE FLAMMABLE MATERIALS IN THE APPLIANCE STORAGE DRAWER OR
NEAR THIS APPLIANCE. DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE
WHILE IT IS IN OPERATION.
11. WARNING - The cooktop will become hot during and directly after use. Do not touch any components
during this time, as they may be hot and can cause burns.
12. Cleaning may only be commenced on the appliance once it has cooled down.
13. When the appliance is not being used, the knobs must be kept in the ‘OFF’ position.
14. Not to be used in a marine environment.
15. DO NOT USE THIS APPLIANCE AS A SPACE HEATER.
16. DO NOT MODIFY THIS APPLIANCE. This appliance is not suitable for use with aftermarket lids or
covers.
DO NOT OPERATE THIS APPLIANCE BEFORE READING THE INSTRUCTION
BOOKLET.
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
DO NOT STORE CHEMICALS OR FLAMMABLE MATERIALS OR SPRAY
AEROSOLS NEAR THIS APPLIANCE.
DO NOT USE EXTERNAL CONTROLLERS OR TIMERS ON THIS
APPLIANCE.
SUPPLIED WITH THIS APPLIANCE