Page 1
OMEGALAQTM
Liquid Temperature Lacquers
Experimental Kit, Model LAQ-KIT-(*)††
includes one 2 oz bottle of OMEGALAQ
LAQ-0450G
OMEGALAQ
TM
Liquid
Liquid (up to 350°F), one 2 oz bottle of Green
Label Thinner, and one roll of 100 adhesive
labels. Shown smaller than actual size.
LAQ Series
Description: Same material used
in OMEGAMARKERTM in
lacquer suspension. Lacquer
serves a transport function only.
OMEGALAQTM may be thinned
to ensure workable consistency.
Thinning OMEGALAQ will not
affect its accuracy.
Order GREEN LABEL THINNER.
Directions for use: Shake or stir
to uniform consistency. Apply thin
smear to the working surface
before heating begins. It dries
almost instantly to a mark. When
the stated temperature is reached
on subsequent heating, this
mark liquifies sharply. A melted
OMEGALAQ coating does not
revert to its original dull-opaque
appearance but remains glossytransparent which makes subsequent
interpretation a simple matter.
Uses: For application to fabrics,
rubber, plastics and smooth
surfaces, like glass or polished
metal–on which OMEGAMARKER
may not leave a distinct mark,
or cannot conveniently be used.
Widely accepted for monitoring
temperatures in the electronics field.
OMEGALAQTM Kit
LAQ-KIT
An inexpensive kit including a roll
of 100 TAP adhesive labels, a 2 oz.
bottle of OMEGALAQTM, and a 2 oz.
bottle of thinner that doesn’t leave
a mark on any surface.
TM
Make Your
Own Labels
OMEGALAQ
OMEGALAQ
smaller than actual size.
°F °C °F °C °F °C °F °C
175† 79 400 204 750† 399 1250† 677
200
225
250 121 475
275 135 488
300 149 500
313 156 550 288 1050 566 1700
325
350 177 600 316 1150
363 184 650 343 1200
375 191 700
† OMEGALAQTM Liquids: Best candidates for high vacuum.
TM
Liquids and
TM
Thinner shown
Model TAP, roll of 100 adhesive labels
shown smaller than actual size.
OMEGALAQ
Available in the Following Degrees
†
93 425 218 800 427 1300† 704
†
107 450 232 850 454 1400 760
†
163 575 302 1100 593 1800† 982
†
246 900 482 1450 788
†
253 950 510 1500† 816
†
260 1000 538 1600† 871
†
621 1900† 1038
†
†
371
649
†
927
TAP Adhesive Labels
TAP adhesive labels measure
12.7 L x 15.9 mm W (0.500 x
0.625") and have a thickness of
0.064 mm (0.0022") and can be
used at a maximum temperature
of 180°C (356°F). They are made
of a polymide film with a silicone
pressure sensitive adhesive.
Specifications
Time Response: On the order of
milliseconds (0.001 sec)
Maximum Range: 2000°F (1093°C)
Accuracy: ±1.0%
To Order
Model No. Description
LAQ-0(*)G OMEGALAQ
GREEN LABEL THINNER OMEGALAQ
GREEN LABEL THINNER-PINT OMEGALAQ
TAP Adhesive labels, rated to 350°F,
package of 100
LAQ-KIT-(*)†† OMEGALAQ
OMEGALAQ
and 100 TAP adhesive labels
Specify Temperature in °F.
*
†† Temperature ranges available from 175° to 325°F.
Note: Temperature indicating labels and lacquers tend to outgas in vacuum.
Ordering Example: LAQ-0250G, OMEGALAQ
TM
liquid 250°F (121°C).
1
TM
liquid, 2 oz
TM
thinner, 2 oz
TM
thinner, pint
TM
liquid (2 oz),
TM
thinner (2 oz),
Loading...