Omega HHLM-1MV User Manual

OMEGA

HHLM-1MV

Light Transducer

omega. com

TM

OMEGAnetSM On-Line Service

http://www.omega.com

Servicing North America:

USA: ISO 9001 Certified Canada:

One Omega Drive, Box 4047 976 Bergar

Stamford, CT 06907-0047 Laval (Quebec) H7L5A1

Tel: [phone] Tel: [phone]

FAX: [phone] FAX: [phone]

e-mail: [e-mail] e-mail: [e-mail]

Benelux:

Postbus 8034, 1180 LA Amstelveen,

The Netherlands

Tel: [phone] FAX: [phone]

Toll Free in Benelux: 06 0993344

e-mail: [e-mail]

Czech Republic:

ul. Rude armady 1868, 733 01 Karvina-

Hranice, Czech Repubic

Tel: [phone] FAX: 420 (69)

6311114

e-mail: [e-mail]

France:

9, rue Denis Papin, 78190 Trappes

Tel: [phone] FAX: [phone]

Toll Free in France: 0800-4-06342

e-mail: [e-mail]

Germany/Austria:

Daimlerstrasse 26, D-75392

Deckenpfronn, Germany

Tel: [phone] FAX: [phone]

Toll Free in Germany: 0800 82 66342

e-mail: [e-mail]

Internet e-mail

[e-mail]

For immediate technical or application assistance:

USA and Canada: Mexico and Latin America:

Sales Service: 1-800-826-6342 / 1-800-TC-OMEGASMTel: (95) 800-TC-OMEGA

Customer Service: 1-800-622-2378 / 1-800-622-BESTSMFAX: (95) 203-359-7807

Engineering Service: 1-800-872-9436 / 1-800-USA-WHENSMEn Español: [phone]

TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA

e-mail: [e-mail]

Servicing Europe:

United Kingdom: ISO 9002 Certified

One Omega Drive

Riverbend Technology Centre Northbank, Irlam,

Manchester, M44 5EX, England

Tel: [phone] FAX: [phone]

Toll Free in England: 0800-488-488

e-mail: [e-mail]

SM

INTRODUCTION

This instrument is a portable easy use, compact-sized light transducer

designed for simple one hand operation. Provides lux unit measurements.

SAFETY INFORMATION

It is recommended that you read the safety and operation instructions before

using the lightmeter.

• To avoid electric shock, do not operate this product in wet or damp
conditions.

• To avoid injury or fire hazard, do not operate this product in an explosive
atmosphere.

• To avoid eye injury, wear eye protection if there is a possibility of exposure
to high-intensity rays.

• Do not immerse in liquids, clean the sensor head using only a damp cloth.

• Cover sensor head when not in use to extend silicon photodiode sensor life.

The symbol on the instrument indicates that the operator must refer to an

explanation in this manual.

WARNING

1

SPECIFICATIONS

GENERAL

Low battery indication: the "Red LED" is displayed when the battery voltage

drops below the operating level.

Operating Environment: 0°C to 50°C at < 70% relative humidity.
Storage Temperature: -20°C to 60°C, 0 to 80% R.H. with battery removed from

meter.

Accuracy: Stated accuracy at 23°C ± 5°C, <70% relative humidity.
Battery: 4 pcs 1.5V (AAA size).
Battery Life: 200 hours typical.
Dimensions: 170mm(H) x 44mm(W) x 40mm(D).
Weight: 200g including batteries.

2

ELECTRICAL

Photometric Formulas:

Rangescale:DMM to 200.0mV range

Resolution: 0.01lux
Spectral response: CIE photopic

The CIE photopic curve is an international standard for the color response

Acceptance angle: ¦¢2<2% cosine corrected (150°)
Total accuracy for CIE standard illuminant A (2856K): ±(3%rdg + 10dgts)

10.764·footcandles=lux (lumens/meter2)

0.0929·lux=footcandles (lumens/foot2)
¸10(20lux), x1(200lux)

x10(2000lux), x100(20000lux)
x1000(200000lux)

of the average human eye

3

CIE standard illuminant A can be realised by means of CIE standard

source A, which is defined as: A gas-filled tungsten-filament lamp

operating at a correlated colour temperature of 2856K

Temperature Coefficient: 0.1x (specified accuracy)/°C (<18°C or >28°C)

OPERATING INSTRUCTIONS

Push buttons
Range Select Button

Press "RANGE" button to select the desired lux range. Each time you press
"RANGE" button, the range (and the input range annunciator) incremants,
and a new value is displayed.

4

OPERATION

1. Plug the light transducer test leads into the Vdc input jack and common or
ground input jack on the DMM. Observe polarity.

2. Set the DMM to the 200mV range only.

3. Set the light transducer power switch to the desired range (use range button
select 20lux, 200lux, 2000lux, 20000lux) or only 200000lux range.

4. Remove the sensor head cover.

5. Hold the sensor head steady and make certain that the light source completely
fills the cosine correction dome.

6. Move away from the sensor head to avoid shadowing it. The sensor head has
a 1.5 meter cable to allow separation between the observer and the measure­ment location.

7. DMM reading multiplies light transducer illuminance value. If magnitude of lux
is not known, press light transducer RANGE button to the highest range and
reduce until a satisfactory reading is obtained.

8. Cover sensor head to extend sensor life.

5

SPECIAL CONSIDERATIONS

• Keep the plastic domed cosine corrector clean and free of scratches. It may
be cleaned with a soft cloth and isopropyl alcohol.

• When light is received from many directions simultaneously, take special care
to avoid reflections or shadowing the sensor with your body.

• For best accuracy, repeat the measurement several times to ensure that the
light source has remained stable.

• Avoid flexing the cable excessively at either end of the cable.

• The Inverse-square Law
The law stating that the illuminance E at a point on a surface varies directly with
the intensity I of a point source, and inversely as the square of the distance d
between the source and the point. If the surface at the point is normal to the
direction of the incident light, the law is expressed by E=I/d2.

• Cosine Law
The law that the illuminance on any surface varies as the cosine of the angle
of incidence. The angle of incidence q is the angle between the normal to the
surface and the direction of the incident light. The inverse-square low and the
cosine law can be combined as E=(I cos q )/d2.

6

Cleaning

Periodically wipe the case with a damp cloth and detergent, do not use abrasives
or solvents.

CIE Photopic Curve

Luminous Efficiency Coefficient

Wavelength in Nanometers

7

Lumen/Watt Conversion Factor

Vl

CIE Photopic Photopic

Coefficient Factor

380 0.0000 0.05

(nm) Effciency Conversion

Wavelength Luminous Lumen/Watt

390 0.0001 0.13

400 0.0004 0.27

410 0.0012 0.82

420 0.0040 2.73

430 0.0116 7.91

440 0.0230 15.7

450 0.0380 25.9

460 0.0600 40.9

470 0.0910 62.1

480 0.1390 94.8

490 0.2080 142.0

500 0.3230 220.0

510 0.5030 343.0

520 0.7100 484.0

530 0.8620 588.0

540 0.9540 650.0

550 0.9950 679.0

8

555 1.0000 683.0

560 0.9950 679.0

570 0.9520 649.0

580 0.8700 593.0

590 0.7570 516.0

600 0.6310 430.0

610 0.5030 343.0

620 0.3810 260.0

630 0.2650 181.0

640 0.1750 119.0

650 0.1070 73.0

660 0.0610 41.4

670 0.0320 21.8

680 0.0170 11.6

690 0.0082 5.59

700 0.0041 2.78

710 0.0021 1.43

720 0.0010 0.716

730 0.0005 0.355

740 0.0003 0.170

750 0.0001 0.820

760 0.0001 0.041

OMEGA warrants this unit to be free of defects in materials and workmanship and to give satisfactory service for a
period of 13 months from date of purchase. OMEGA Warranty adds an additional one (1) month g race period to the
normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA's customers
receive maximum coverage on each product. If the unit should malfunction, it must be returned to the factory for
evaluation. OMEGA's Customer Service Depar tment will issue an Authorized Return (AR) number immediately
upon phone or written request. Upon examination by OMEGA, if the unit is found to be def ectiv e it will be repaired or
replaced at no charge. How e ver, this WARRANTY is VOID if the unit shows evidence of having been tampered with
or shows evidence of being damaged as a result of excessive corrosion; or current, heat moisture or vibration;
improper specification; misapplication; misuse or other operating conditions outside of OMEGA's control. Components
which wear or which are damaged by misuse are not warranted. This includes contact points, fuses, and triacs.

OMEGA is glad to offer suggestions on the of use of its various products. Nevertheless, OMEGA only warrants
that the parts manufactured by it will be as specified and free of defects

OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER,
EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE AND ALL IMPLIED WARRANTIES INCLUDING ANY
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
DISCLAIMED.

LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive and the total liability of
OMEGA with respect to this order, whether based on contract warranty, negligence, indemnification, strict
liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In
no event shall OMEGA be liable for consequential, incidental or special damages.

Every precaution for accuracy has been taken in the preparation of this manual; however, OMEGA ENGINEERING,
INC. neither assumes responsibility f or any omissions or errors that may appear nor assumes liability for any damages
that result from the use of the products in accordance with the information contained in the manual.

SPECIAL CONDITION: Should this equipment be used in or with any nuclear installation or activity, purchaser will
indemnity OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the
equipment in such a manner.

WARRANTY

It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is
constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE
mark to every appropriate device upon certification.
The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no
liability for any errors it contains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, patient connected application.

Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING
ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM
OMEGA'S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned
AR number should then be marked on the outside of the return package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prev ent breakage in
transit.

FOR WARRANTY RETURNS, please hav e the f ollowing

information available BEFORE contacting OMEGA:

1. P.O. number under which the product was

PURCHASED.

2. Model and serial number of the product under

warranty, and

3. Repair instructions and/or specific problems relative

to the product.

OMEGA's policy is to make running changes, not model changes, whenever an improvement is possible. This
affords our customers the latest in technology and engineering. OMEGA is a registered trademark of OMEGA
ENGINEERING, INC. © Copyright 1999 OMEGA ENGINEERING, INC. All rights reserved. This document may not
be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable from, in
whole or in part, without prior written consent of OMEGA ENGINEERING, INC.

RETURN REQUESTS / INQUIRIES

FOR NON-WARRANTY REPAIRS, consult OMEGA for

current repair charges. Hav e the f ollo wing inf ormation
available BEFORE contacting OMEGA:

1. P.O. number to cover the COST of the repair.

2. Model and serial number of product , and

3. Repair instructions and/or specific problems relative
to the product.

Where Do I Find Everything I Need for

Process Measurement and Control?

HEATERS

þ Heating Cable

þ Cartridge & Strip Heaters

þ Immersion & Band Heaters

þ Flexible Heaters

þ Laboratory Heaters

PRESSURE/STRAIN AND FORCE

þ Transducers & Strain Gauges

þ Load Cells & Pressure Gauges

þ Displacement Transducers

þ Instrumentation & Accessories

FLOW/LEVEL

þ Rotameters, Gas Mass

Flowmeters & Flow Computers

þ Air Velocity Indicators

þ Turbine/Paddlewheel Systems

þ Totalizers & Batch Controllers

M-2858/0799

OMEGA...Of Course!

TEMPERATURE

þ

Thermocouple, RTD & Thermistor

Probes, Connectors, Panels &

Assemblies

þ Wire: Thermocouple, RTD &

Thermistor

þ

Calibrators & Ice Point References

þ

Recorders, Controllers & Process

Monitors

þ Infrared Pyrometers

ENVIRONMENTAL
MONITORING AND CONTROL

þ

Metering & Control Instrumentation

þ Refractometers

þ Pumps & Tubing

þ Air, Soil & Water Monitors

þ Industrial Water & Wastewater

Treatment

þ pH, Conductivity & Dissolved

Oxygen Instruments

pH/CONDUCTIVITY

þ pH Electrodes, Testers &

Accessories

þ Benchtop/Laboratory Meters

þ Controllers, Calibrators,

Simulators & Pumps

þ Industrial pH & Conductivity

Equipment

DATA ACQUISITION

þ Data Acquisition & Engineering

Software

þ Communications-Based

Acquisition Systems

þ Plug-in Cards for Apple, IBM

& Compatibles

þ Datalogging Systems

þ Recorders, Printers & Plotters