Omega HHB400 User Manual

omega.com
e-mail: info@omega.com
For latest product manuals:
omegamanual.info
HHB400
Wireless Video Inspection System
Shop online at
User’s Guide
OMEGAnet®On-Line Service Internet e-mail
omega.com info@omega.com
It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification. The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice. WARNING: These products are not designed for use in, and should not be used for, human applications.
Benelux:
Managed by the United Kingdom Office Toll-Free: 0800 099 3344 TEL: +31 20 347 21 21 FAX: +31 20 643 46 4 e-mail: sales@omegaeng.nl
Czech Republic:
Frystatska 184 733 01 Karviná, Czech Republic Toll-Free: 0800-1-66342 TEL: +420-59-6311899 FAX: +420-59-6311114 e-mail: info@omegashop.cz
France:
Managed by the United Kingdom Office Toll-Free: 0800 466 342 TEL: +33 (0) 161 37 29 00 FAX: +33 (0) 130 57 54 27 e-mail: sales@omega.fr
Germany/Austria:
Daimlerstrasse 26 D-75392 Deckenpfronn, Germany Toll-Free: 0800 6397678 TEL: +49 (0) 7056 9398-0 FAX: +49 (0) 7056 9398-29 e-mail: info@omega.de
Servicing Europe:
U.S.A. and Canada:
Sales Service: 1-800-826-6342/1-800-TC-OMEGA
®
Customer Service: 1-800-622-2378/1-800-622-BEST
®
Engineering Service: 1-800-872-9436/1-800-USA-WHEN
®
U.S.A.: ISO 9001 Certified
OMEGA Engineering, Inc., One Omega Drive, P.O. Box 4047 Stamford, CT 06907-0047 Toll-Free: 1-800-826-6342 Tel: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com
Servicing North America:
For immediate technical or application assistance:
Mexico/Latin America:
En Español: 001 (203) 359-7803 FAX: 001 (203) 359-7807 info@omega.com.mx e-mail: espanol@omega.com
United Kingdom:
ISO 9001 Certified
OMEGA Engineering Ltd. One Omega Drive River Bend Technology Centre Northbank Irlam, Manchester M44 5BD United Kingdom Toll-Free: 0800-488-488 TEL: +44 (0) 161 777-6611 FAX: +44 (0) 161 777-6622 e-mail: sales@omega.co.uk
Canada:
976 Bergar Laval (Quebec), H7L 5A1 Canada Toll-Free: 1-800-826-6342 TEL: (514) 856-6928 FAX: (514) 856-6886 e-mail: info@omega.ca
CONTENTS
Welcome .......................................1
Overview.......................................1
Features .......................................2
Safety Instructions ............................2,3
Battery Precautions................................3
Product Components .......................... 4
ToolComponents ..............................5
Monitor ......................................5
Description for Keys ............................
Operation Instructions........................ 6
Connecting the Display Unit to the Camera . . . ......7
HeadandProbe ............................7
Accessories Installation ......................7
Connect the Grip Handle to the Monitor .........7
Install Micro SD Card . . ..................... 8
U-disk Function- attache to computer .......... 8
Video Output . . . . . . . . . . . ................... 8
How to Work................................... 8
Howtooperatethegrip ...................... 8
How to view the screen....................... 9
HowtosetthescreenMenu...................
Description for Keys ......................10,11
Operation Precautions ........................11,12
Trouble Shooting ...............................13
FCC Information ...............................14
Cautions......................................14
Specifications ..............................15,16
6
....
. . . . . . .9
i
WELCOME
Thank you for purchasing a HHB400 Wireless Data logging Video Inspection Camera Scope. Please read this User’s
Manual
carefully before using this product.
The product is designed as a remote inspection device. It can be used to look into tight or inaccessible areas and wirelessly trans­mit real time video or still images for monitoring or recording.
Typical applications may include HVAC inspection, automotive inspection, cable routing, automotive/boat/aircraft inspection, etc.
OVERVIEW
The HHB400 Wireless Video Inspection System
HHB400 Camera Scope with removable display comes with, 12mm Diameter, 3.28 ft. (1m) Obedient Probe, 2GB Micro SD card, 3 Extension Tools: (Mirror, Magnet, Pick-Up Hook), USB and Video interconnect Cables, Li-ion rechargeable batteries with Charger, Hard Blow Mold Case and Instruction Manual. It is suitable for HVAC/R, plumbing and general inspection
The system has a high clarity color LCD of 3.5" in size. The camera head and adjustable LED lights are imbedded in the probe tip. Three accessories can be attached to the probe tip for various applications: the magnetic tip is used to pick up small metal objects; the mirror tip is used to view 90° angle; the hook is used to grab onto objects.
HHB400 Series’ wireless function allows user to detach the LCD from the handle and view findings remotely up to 32 ft away. The system operates on a built-in rechargeable lithium polymer battery. It interfaces with external displays such as computer, TV and LCD panel via USB, SD card and AV cable.
1
FEATURES
• 12mm diameter probe, 3.28 ft. (1m) long, flexible obedient and waterproof to IP67 standards
• Optional probe extensions are available to extend probe length up to 16 ft. (5m)
• 3.5 in. (88.9mm) (Screen Diagonal) TFT-LCD Wireless Color Moni­tor can be detached from the unit for remote viewing up to 32 ft. (10m) away
• Both monitor and handle use Li-ion rechargeable batteries. System comes complete with batteries and charger.
• Two LED lights inside the tip of the pro
be illuminate dark spaces
for clear inspection
• Built-in magnets on back of monitor facilitate hands-free operation
• View results in real time or data log and record in still photo (JPEG) or (AVI) video
• NTSC or PAL compatible USB and AV Out interfaces
• Three languages menu includes English, Spanish and French
• (x3.2) zoom feature
• 180° image rotation feature on still images
SAFETY INSTRUCTIONS
Failure to follow the instructions listed below may result in electric shock or personal injury.
• Read and understand all instructions prior to any operation.
• Do not remove any labels from the product.
• Work in a well lit area as dark areas may cause accidents.
• Do not operate the product in the presence of flammable/ explosive gases.
• Do not use the product around corrosive chemicals which can damage sensitive tips.
• Keep bystanders, children and vi
sitors away while operating the
product.
2
• Stay alert, watch what you are doing and use common sense. A moment of interruption can result in serious personal injury.
• Do not over-reach. Keep proper footing and balance at all times.
• Always wear eye protective gear. Dust mask, non-skid safety shoes, hard hat or hearing protection must be used for appropri­ate conditions.
• Do not place the product on any unstable cart or surface. The product may fall causing serious injury to a person or serious damage to the product.
• Never spill liquid of any kind on the video display units. Liquid in­creases the risk of electrical shock and damage to the product.
• Do not use the device for personal or medical use.
• The units are not shock-resistant. Do not drop it.
BATTERY PRECAUTIONS
• Please use the enclosed factory power adapter, otherwise you may damage the instrument.
• Completely exhaust the power for the first time. We recommend full charging and full discharging for the first few times. The charging time should not be less than 12 hours for the first few usages. A fully activated battery will offer maximum capacity of the built-in batteries.
• The charging and discharging time differs based on the current consumption of the units’ components.
• Always keep the charging connector away from the metal and oily objects.
• Fully charge the battery to make sure it has high performance.
• Don’t compress and puncture the battery inside.
“Li-ion” Rechargeable battery inside! Please do not open battery compartment in the handle unless battery replacement is necessary.
• Don’t throw the product into fire, this may cause an explosion.
• Dispose the battery properly. High temperature will cause the battery to explode. Some countries have regulations concerning
battery disposal.
Please follow all applicable regulations.
3
4
PRODUCT COMPONENTS
1Camera head and Probe 2The grip 3LCD Screen 4Magnetic tip 5Hook tip 6Mirror tip 7DC adapter 8One-into-two cable
9Micro SD memory card 10TV cable 11USB cable
Fig. 1
Fig. 4
Fig. 3
10
11
TOOL COMPONENTS
Grip Handle
ACamera protection cover
(Remove cover before use)
BCamera head CProbe DProbe connector EPower indicator——Green
lights means normal power; Red light means low battery.
FSwitch / Wheel button to
adjust the LED brightness
GCharging light indicator HCharging interface
Monitor
I JLocking buckle clip KSignal connector slot LCharging light indicator MCharging interface NMicro SD socket OUSB interface PVideo Out Q R SMENU T U VLCD screen WBase stand
5
Fig. 5
Fig. 6
6
OPERATION INSTRUCTIONS
• Battery Charging
1. Connect the DC cable to the grip and/or screen.
2. Plug the AC plugs to household power outlet.
3. The LED G and/or L turns red means charging.
4. The LED G and/or L turns green, means fully charged
5. Pull out the AC plug of adapter. Notes: If you want to charge both the grip and screen, use the one-
to-two cable. The single end goes to the adapter, and the double end goes to screen and grip.
DESCRIPTION FOR KEYS
Keys View mode Playback mode Menu set
MENU
XXXX
XXXX
XXXX
XXXX
Switch into view mode; Hold for 3s to turn off the unit.
Switch into playback mode; Hold for 3s to turn off the unit.
Hold for 3s to turn off the unit.
Switch into current file operation, delete single all format the memory card, etc.
Switch into menu set.
Set functions set date and time
Show the last photo or video;
Take a photo
Moving to left;
Show the next photo or video;
Tak e a v id eo
Moving to right
Play pause, resume the video file;
Image rotation
Moving up / pro­gressive increase data and time;
Stop video file; View six files or six folders.
Image magnify
Moving down / progressive decrease data and time;
7
CONNECTING THE DISPLAY UNIT TO THE CAMERA
HEAD AND PROBE:
The display unit must be connected to the camera head and probe. To connect the probe to the display unit, make sure the keyed ends are properly aligned (See Fig. 7). Once they are aligned, tighten the nut.
ACCESSORIES INSTALLATION:
The three accessories include mirror tip, hook tip and magnetic tip (See Fig. 2). All are attached to the camera head the same way. Hold the camera head as shown in Fig. 8, slip the semicircle end of the accessory over the flats of the camera head then rotate the accessory 90° to fix it in place as shown in Fig. 9.
• Connect the grip handle to Monitor
The product can work with the grip detached from screen and the grip attached with screen; Slide the slot at the back screen into the slot of grip in the left direction until you hear the locking sound, which means con­nection is accomplished. Press the lock buckle clip and slide to the right direction to detach the screen (FIG.10).
Note: The wireless function is off while the
product is attached to the screen on the grip, which will en­sure that the image quality does not suffer from outside inter­ference.
• Install Micro SD card
When the SD card is inserted correctly, icon will show on the screen; Otherwise icon will show.
• U-disk function- attach to computer
The USB interface on the screen can be connected to a computer. When inserting the memory card, it can be considered as a U-disk; When connecting the USB2.0 cable to computer and turning the power on, the LCD displays “MSDC” , now the screen can be used as U-disk.
• Video output
If you want to view image from television, please connect the VIDEO OUT of screen to VIDEO IN of television by video out cable, now the screen is off.
• How to work
1. How to operate the grip: a. Roll the button on the grip towards the probe direction to
power on.
b. Continue to roll the button to adjust the brightness of the
camera LEDS (FIG.11).
8
2. How to view the screen a. Insert the Micro SD to memory card slot correctly. b. Press to enter view mode, the screen automatically find
the image signal. When the same receiving and transmission frequency occurs, it is time to view image.The default chan­nel is CH12414MHZ)。
c. Press to take a photo (but if no card is inserted, the key
will not function), the files will be stored in memory card itself.
d. Press to start record image (but if no card is inserted, the
key will not function), red icon will show on the up edge of the screen, the files with be stored in memory card itself.
e. Press to rotate image, every press rotates 180°. f. Press to zoom from 1 to 3.2 times with corresponding
numbers indicating zoom size.
g. Press to enter menu set. h. Press to enter playback mode. i. Hold for 3s to turn off the product.
Note: The screen turns off itself if not in use for 3 minutes. Tips: When the system is working (especially in video mode),
ejecting SD card will damage the stored files or damage SD card, please make sure the system is off before removing SD card.
3. How to set screen Menu
a. In View status, press MENU
to set menu.
b. Select the menu by pressing the four direction keys. c. Press MENU
to confirm the selection.
d. Press EXIT back to the last menu until you are View mode. e. The following table shows screen setting menu.
9
4. How to operate Playback mode (No selection is available if there is no memory card.)
a. Press to display stored six images, press again to display
different folders.
b. Press to scan files or folders. c. Press or to view the last or next image. d. If it is video file, press to play video, press again to pause.
Pressing once more will resume video. Press to stop playing.
e. Press to play files, press direction keys to select delete
single all files or format the memory card.
f. Select EXIT to return to last menu until playback mode. g. Press to return to view mode.
10
DESCRIPTION FOR KEYS
Function Menu Selection Selection Parameter Menu
MENU
CH1; CH2; CH3; CH4; EXIT High Quality; Standard Quality; Low Quality; EXIT QVGA; D1; EXIT NTSC; PAL; EXIT
Tuner Channel Photo Quality Movie Quality TV Output Standard EXIT
ON; OFF; EXIT Photo 1; Photo 3; Movie 5s; Movie 10s; EXIT ON; OFF; EXIT
Auto Capture Master Capture File OverWrite Setting EXIT
Advanced Setting
Auto Capture
YY/MM/DD On; Off; EXIT On; Off; EXIT Yes; No
Set Time/Date Photo TimeStamp Movie TimeStamp Resume to factory
default EXIT
Set Time/ Date
11
5. This product is designed for inspection of hard-to reach areas. Typical applications include HVAC inspection, car inspection, circuitry, vessel and aircraft.
OPERATION PRECAUTIONS!
1. Please read all the safety instructions carefully.
2. The probe is flexible to help you operate in hard-to-reach areas. Please don’t insert or bend by force. Please do not over bend any part of the probe. Normally, the bending radius should not be less than 2" (50mm) to prevent from permanent damage to the probe.
3. Don’t use the probe or camera head to modify surroundings, clear pathways or clogged areas.
4. The hand-held display unit is not waterproof. The camera head and its cover are waterproof, but not acid-proof or fire-proof. Do not touch these materials or they will ruin the camera head’s pro­tective plastic. Avoid submersing the camera head into corrosive, oily places or high temperature objects.
5. Don’t place the cameral head or probe into anything or anywhere that may contain a live electrical charge.
Please check following methods to avoid injury.
For walls: For inspecting the inside of walls, be sure to shut off the circuit breaker to the whole house before
using the tool. For pipes: If you suspect a metal pipe could contain an electrical
charge, have a qualified electrician check the pipe before using this product. A ground circuit, in some cases, can be returned to the cast aluminum pipes and cause them to be charged.
For automobiles: Be sure the automobile is not running during inspection. Metal and liquid under the hood may
be hot. Don’t get oil or gas on the camera head.
• Please do not operate this product unless the manual has been
read thoroughly and proper training has been completed.
• The red LED will light when the handle has a low battery;
The “ ” will show up on the screen if the monitor has a low battery.
• Do not immerse the handheld display unit in water which will re-
sult in electric shock and damages.
• The camera head is water-proof, but the handheld display is not
water-proof.
• Do not use the product if condensation forms inside the camera
head.
• If the tool does not work well after turning it on. Please take the
batteries out and do not use. Please have the unit checked by a qualified technician.
• Store idle products out of reach of children and other untrained
personnel. The product is dangerous in the hands of untrained users.
• Maintain the inspection product with care. If the product is
dropped, check for the breakage which may affect its operation. If it is damaged, have the product serviced before using. Many acci­dents are caused by poorly maintained products.
• Use only accessories that are recommended by the manufacturer
for your product. Accessories are suitable for the product, but may become hazardous when used on another product.
• Should the unit freeze up, press reset button or power off to reset.
• Dry your hands before turning the tool ON or OFF.
• Protect against excessive heat. The product should be kept away
from heat sources, such as radiators heat registers stoves or other products (including amplifiers) that produce heat. Don’t use the tool near moving machinery or areas where the temperature ex­ceeds 113F (45C).
• Please cover the camera tip with protective cap while not in use.
• Store the product in ventilated and dry places.
12
13
TROUBLE SHOOTING
Problems Causes Solutions
Please check and try again.
Replace and try again.
Ask a technician to replace the battery. Set the same channel.
Check and connect again. Check if stains exist.
Use adapter for charging.
Press reset or use adapter for charging to release.
Use adapter for charging Ask a technician to replace the battery.
Adapter didn’t make a good connection with product.
The connector or cable is broken.
Dead battery
1. Different channel set between the grip and screen.
2. The probe is loose.
3. Stains on the cam­era head.
Low battery
The circuit is in protection status.
Low battery Dead battery
Will not charge
The screen is on but without image or shows “No Signal”
LEDs on the camera head are dim at max brightness, dis­play changes from black to white, color display turns itself off after a period.
The product won’t turn on.
Abnormal display or invalid keys.
Interference to the screen or voltage fluctuation.
Please use the reset button inside the hole below the stand base.
FCC INFORMATION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interfer­ence received, including interference that may cause undesired op­eration. Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
CAUTIONS!
• The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not expose instrument to moisture.
• Don’t drop the instrument or use by force.
• Don’t disassemble the instrument to avoid failure.
• Please do not open battery compartment in the handle unless
battery replacement is necessary.
• Don’t place the instrument with corrosive gas or objects.
• Don’t expose the instrument in environment which is with shock,
too high or too low temperatures.
• Store the instrument in a safe area.
• Don’t immerse the instrument into water which can cause dam-
ages to the product.
• Turn off the Camera/Monitor if the system is not in use.
• The adapter is used as the disconnect device from the mains.
The adapter shall remain readily operable.
• The Camera/Monitor can only be completely disconnected from
the mains by unplugging the adapter.
• Do not cut the DC power cable of the apparatus to fit with another
power source.
• Attention should be paid to the disposal of batteries in environ-
mentally- friendly ways.
• Charge the batteries every three months if not being used for a
long period of time
14
SPECIFICATIONS:
CAMERA HANDLE/PROBE
Transmission Range: Up to 32 ft. (10m), clear range without obstacle Transmission Frequency: 2414Mhz, Resolution: 320 x 240 Pixels Lighting Source: White LED Focal Length: 1.97 in (50mm) Field of View: 60° Depth of Field (DOF): 1.2" – 3.94" (30mm – 100mm) Camera Tipped Probe: 0.47" (12mm) Diameter Standard Probe Length: 3.28 ft. (1m) Standard Water proof capacity: IP67, only for obedient probe and camera
head
Power Source: 3.7 V “Li-ion” rechargeable battery pack (included);
DC5.5V Power Adapter: Input: AC 100 – 240 V, 50 – 60 Hz; Output: 5.5V, 1.5A Dimensions: 8.5" x 6.9" x 1.9" (215 x 175 x 50mm) Weight: 8 oz. (228g)
PROBE OPTIONS:
• 3.28 ft. (1m) and 6.56 ft. (2m) long 12mm Diameter Probe
Extensions -Total Length: Up to 16 ft. (5m)
• 3.28 ft. (1m) long 9.0mm Diameter Camera Tipped Probe
MONITOR
Display: 3.5 in. (88.9mm) (Screen Diagonal) Color TFT LCD Screen Receiving Frequency: 4 channels, 2414MHz, 2432MHz, 2450MHz,
2468MHz Resolution: 320 x 240 Pixels Power Source: 3.7 V “Li-ion” rechargeable battery pack (included);
DC5.5V
15
16
Power Adapter: Input: AC 100 – 240 V, 50 – 60 Hz; Output: 5.5V 1.5A Image Resolution: 320 x 240 Pixels Video Resolution: QVGA/D1 Image storage media: Micro SD cardUp to 16G Dimensions: 3.9 x 3.2 x 1 in. (100 x 82 x 26mm) Weight: 6.2 oz. (175g) Operating Temperature: 32 to 113°F (0 to 45°C)
5 to 95%RH non-condensing Storage Temperature: (-20 to 60°C) <85%RH Adapter: Input-100 to 240VAC Output: 5.5V 1.5A Charging Time: About 3.5 Hours Battery Life: About 2 Hours
EU Environmental Protection Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
NOTES:
17
NOTES:
18
NOTES:
FOR WARRANTY RETURNS, please have the following information available BEFORE contacting OMEGA:
1. Purchase Order number under which the product was PURCHASED,
2. Model and serial number of the product under warranty, and
3. Repair instructions and/or specific problems relative to the product.
FOR NON-WARRANTY REPAIRS,
consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:
1. Purchase O rde r number to cover the COST
of the repair,
2. Model and serial number of the product, and
3. Repair instructions and/or specific problems
relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our cus­tomers the latest in technology and engineering. OMEGA is a registered trademark of OMEGA ENGINEERING, INC. © Copyright 2010 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.
WARRANTY / DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase. OMEGA’s Warranty adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corro­sion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not warranted, include but are not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic WARRANTY/ DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.
RETURN REQUESTS / INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESS­ING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence. The purchaser is responsible for shipping charges, freight, insurance and proper pack­aging to prevent breakage in transit.
Where Do I Find Everything I Need for
Process Measurement and Control?
OMEGA…Of Course!
Shop online at omega.com
sm
M4842/0810
TEMPERATURE
䡺⻬
Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies
䡺⻬
Wire: Thermocouple, RTD & Thermistor
䡺⻬
Calibrators & Ice Point References
䡺⻬
Recorders, Controllers & Process Monitors
䡺⻬
Infrared Pyrometers
PRESSURE, STRAIN AND FORCE
䡺⻬
Transducers & Strain Gages
䡺⻬
Load Cells & Pressure Gages
䡺⻬
Displacement Transducers
䡺⻬
Instrumentation & Accessories
FLOW/LEVEL
䡺⻬
Rotameters, Gas Mass Flowmeters & Flow Computers
䡺⻬
Air Velocity Indicators
䡺⻬
Turbine/Paddlewheel Systems
䡺⻬
Totalizers & Batch Controllers
pH/CONDUCTIVITY
䡺⻬
pH Electrodes, Testers & Accessories
䡺⻬
Benchtop/Laboratory Meters
䡺⻬
Controllers, Calibrators, Simulators & Pumps
䡺⻬
Industrial pH & Conductivity Equipment
DATA ACQUISITION
䡺⻬
Data Acquisition & Engineering Software
䡺⻬
Communications-Based Acquisition Systems
䡺⻬
Plug-in Cards for Apple, IBM & Compatibles
䡺⻬
Data Logging Systems
䡺⻬
Recorders, Printers & Plotters
HEATERS
䡺⻬
Heating Cable
䡺⻬
Cartridge & Strip Heaters
䡺⻬
Immersion & Band Heaters
䡺⻬
Flexible Heaters
䡺⻬
Laboratory Heaters
ENVIRONMENTAL MONITORING AND CONTROL
䡺⻬
Metering & Control Instrumentation
䡺⻬
Refractometers
䡺⻬
Pumps & Tubing
䡺⻬
Air, Soil & Water Monitors
䡺⻬
Industrial Water & Wastewater Treatment
䡺⻬
pH, Conductivity & Dissolved Oxygen Instruments
Loading...