Page 1
LONG LIFE BAND AND NOZZLE HEATERS
HBA Series 1 to 6"
(3 to 15 cm) Wide OnePiece Nozzle Heaters
U Nozzle Temps to 1000°F
U 42" (107 cm) Leads
Standard
U Stainless Steel Clamp
Included
Offers Longer Life than mica
nozzle heaters.
HBA Series
Barrel
Dia.
Heated
Width
HBT Series
Barrel
Dia
2"
HBA/HBT Series
To Order
Barrel Wt.
Watts Volts W/In2 Dia. in (cm) Width Model No. lb (Kg)
275 120 29 1(3) 3 (8) HBA-103027 0.5 (0.2)
275 120 39 1
350 240 50 1
300 120 32 1
500 240 53 1
200 120 21 1
400 120 32 2 (5) 2 (5) HBA-202040 0.5 (0.2)
200 120 24 2
400 120 27 2
800 120 20 2
200 120 22 3
200 120 12 3
200 120 16 4 (10) 1(3) HBA-401020 0.5 (0.2)
1
(4) 1
⁄
2
1
(4) 1
⁄
2
1
(4) 2 (5) HBA-32030 0.5 (0.2)
⁄
2
1
(4) 2 (5) HBA-32050 0.5 (0.2)
⁄
2
3
(4) 1
⁄
4
1
(5) 1
⁄
8
1
(5) 2
⁄
8
1
(5) 6 (15) HBA-216080 0.5 (0.2)
⁄
8
1
(8)
⁄
4
1
(9) 1
⁄
2
1
(4) HBA-31427 0.5 (0.2)
⁄
2
1
(4) HBA-141435 0.5 (0.2)
⁄
2
3
(4) HBA-161620 0.5 (0.2)
⁄
4
1
(3) HBA-211220 0.5 (0.2)
⁄
4
1
(6) HBA-212240 0.5 (0.2)
⁄
4
7
(2) HBA-320820 0.5 (0.2)
⁄
8
1
(4) HBA-341420 0.5 (0.2)
⁄
2
Cost less to operate. Heats up
faster and provides more uniform
heat distribution. More contact
surface than other refractory
insulated nozzle heaters.
Will not short out from fouling.
The 42" (107 cm) leads are
protected by a 36" (91 cm) long
closely woven stainless steel
sheath. No exposed electrical
connections, and element is
sealed to prevent entrance of
contaminates.
Easier to install. Clamp and heater
are separate items and may be
applied from either side.
Construction: A 1⁄2 wide x 0.200"
thick, Incoloy sheath (max. sheath
temperature is 1500°F), magnesium
oxide insulated strip heater is tightly
spiraled to provide maximum heat
transfer to the work. The lead wires
are brazed to the heater terminal
pins, insulated and covered with
heavy duty stainless steel outer
braiding to provide mechanical
protection.
h
HBT Series 2" (5 cm)
Wide Two-Piece Band
Heaters
U Rugged, Premium Quality
U Stocked for Fast Delivery
U Barrel Temperature
to 900°F
U Terminal Posts for
Power Connection
The HBT series has two matching
alloy-sheath (max. sheath
temperature is 1200°F) tubular
elements and stainless steel
matching clamping band, same
as the HB series. Elements are
flattened for maximum transfer.
Wt.
Watts Barrel Dia. in (cm) Model No. lb (kg)
675 3 (8) HBT-30† 1 (0.5)
925 3
650 4 (10) HBT-40† 1 (0.5)
750 4
1100 4
825 5 (13) HBT-50† 1.5 (0.7)
950 5
1100 6
1275 7
1425 8
1550 9
2000 12 (30) HBT-120/* 3 (1.4)
† The two 120V elements must be wired in series for 240V.
/* Specify voltage, insert “120” for 120V or “240” for 240V.
Terminal box, hermetic seals, and flexible leadwire with stainless steel overbraiding are available.
Ordering Example: HBT-55/120 950 watt heater, 120 Vac.
3
(10) HBT-36† 1 (0.5)
⁄
4
1
(11) HBT-45† 1 (0.5)
⁄
2
1
(11) HBT-4411† 1 (0.5)
⁄
2
1
(14) HBT-55/* 2 (0.9)
⁄
2
1
(17) HBT-65/* 2 (0.9)
⁄
2
1
(19) HBT-75/* 2 (0.9)
⁄
2
1
(22) HBT-85/* 2 (0.9)
⁄
2
1
(24) HBT-95/* 2.5 (1.1)
⁄
2
H-12
Loading...