Page 1
Carrying Cases
A-401
A-430-1
A-404
MODELS
Steel cases are substantially constructed and finished in gray hammerloid.
Molded plastic cases are gray, high density polyethylene.
A-401, Plastic Carrying Case for 1212 Gas Pressure Kit, 910 Smoke Gage and
up to 36˝ Roll up Manometers – 7-9/16˝ x 5-7/8˝ x 2-13/16˝
A-402A, Nylon Carrying Pouch for Series 475, 477, 490 Digital Manometers –
7-1/2˝ x 3˝ x 2-1/4˝
A-404, Plastic Carrying Case for Portable Inclined Gages 100, 101, 108, 115 –
12-1/4˝ x 6-1/4˝ x 1-3/4˝
A-405, Plastic Carrying Case for Portable Inclined Gages 109, 100.5, 104-6, 102,
102.5 – 13-1/2˝ x 10˝ x 2-3/8˝
A-413, Steel Carrying Case for Portable Draft Gages 104-8, 104-10 and 48˝ and
larger Slack Tube Manometers – 18-1/2˝ x 4-3/8˝ x 2-1/4˝
A-430-1, Plastic Carrying Case for 1200 series Combustion Test Kit
A-431, Steel Carrying Case for Air Velocity Meter, 400-5
A-432, Plastic Carrying Case for Magnehelic
®
Gage includes mounting stand,
rubber tube, etc. (pgs. 4-5)
A-433, Steel Carrying Case for Air Velocity Meter, 400-10
A-460, Plastic Envelope for inclined Gages 170, 171, 172
A-463, Plastic Carrying Case with foam liner for 475-1-AV Air Velocity Kit – 13-
1/2˝ x 10˝ x 2-3/8˝
Loading...