Omega A-315, A-316, A-317, A-318, A-319 User guide

...
Page 1
ACCESSORIES - VALVES AND CONNECTORS
A-310A/A-310B ++ A-311 ++ A-312 ++
Miscellaneous Accessories
A-5000 A-355 A-365
A-315 A-316 A-318A-317
to www.P65Warnings.ca.gov.
MODEL CHART Instrument valves for permanent installation. They mount in part A-316, A-317,
type C manometer connections or Magnehelic
or 1/8˝ pipe.
Model Description A-310A
A-310B A-311 A-312 A-5003-5
A-5004-4
A-355
A-365
MODEL CHART Gage Connectors for Manometers. Molded nylon construction, threaded .786 x 27
N.S., with O-ring seal. Model Description A-315
A-316 A-317
A-318 A-319
A-321
A-322
3-way vent valve, plastic, 1/8˝ NPT to 1/4˝ metal tubing. Positions are: (1) Line: Gage connected to pressure source. (2) Off: Both gage and connection to pressure source closed. (3) Vent: Gage vented to atmosphere and connection to pressure source closed. 80 psi rating. Replaces former model A310 (brass) Same as A-310A but with 10 psi rating Shut off valve, brass, 1/8˝ NPT to 1/8˝ NPT Shut off valve, brass, 1/8˝ NPT to 1/4˝ metal tubing PVC 1/8˝ male NPT inlet x 1/8˝ female NPT outlet x 1/8˝ female NPT outlet (125 psi maximum) PVC 1/4˝ female NPT inlet x 1/4˝ female NPT outlet x 1/4˝ female NPT outlet (125 psi maximum) Porting valve, acrylic plastic, 1/8˝ NPT inserts. Used for convenient indication of pressure at two points with a single gage Dual porting valve, acrylic plastic, 1/8˝ NPT ttings. For monitoring three pressures, two at a time, with one gage
Gage connector, shut off type, for 3/16˝ rubber tubing Gage connector, bushing, 1/8˝ pipe thread opening Gage connector, 1/8˝ pipe thread opening, less OD thd., for slip t in 3/4˝ dia. opening in 250 series A.F. gages Gage connector 1/4˝ pipe thread opening Flexible red P.V.C. connector, 3/16˝ ID rubber tubing to 1/4˝ ID plastic tube for 1221,1222 and 1227 manometers Brass safety relief valve protects Magnehelic over pressure due to regulator failure etc. Opens at 10 psi. Mounts in tee tting in sensing line or in unused gage port with addition of A-349 reducer. 1/4˝ male NPT (Use two for D.P. application) Gage connector for 1/4˝ tubing. Slip ts in 3/4˝ opening in 250 series A.F. gages (compression nut and ferrule not included)
®
gage and connect to metal tubing
®
or Photohelic® gage against
A-319 A-321 ++ A-322
454
DWYER INSTRUMENTS, LLC | dwyer-inst.com
++USA: California Proposition 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Loading...