Omcan Food Machinery SP-750W Installation Manual
Immersion Blender
Model SP-750W
Instruction Manual
Version 1
3115 Pepper Mill Court, Mississauga, ON, L5L 4X5
4450 Witmer Industrial Estates, Unit 4, Niagara Falls, NY, 14305
1-800-465-0234
www.omcan.com
Table of Contents
Model SP-750W
Section
General Information
Safety and Warranty
Technical Specications
Parts Breakdowns
Electrical Schematics
Warranty Registration
-------------------------------------------------------------------------------- 3
--------------------------------------------------------------------------- 3 - 4
----------------------------------------------------------------------------- 6 - 7
------------------------------------------------------------------------------ 8
Page
---------------------------------------------------------------------- 4 - 5
----------------------------------------------------------------------------- 9
2
General Information
Omcan Manufacturing and Distributing Company Inc. and Food Machinery Of America, Inc. dba Omcan
are not responsible for any harm or injury caused due to any person’s improper or negligent use of
this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and
not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this
machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any
warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while
in operation.
This manual contains all necessary information for the correct and safe use of the machine. Compliance with
the instructions given in this manual will guarantee the prolonged operating duration of the machine and safety
for the operator.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damaged to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Safety and Warranty
IMPORTANT SAFEGUARDS
1. This machine has been designed and built with the most modern construction techniques, to ensure high
performance standards and meet compliance with applicable machinery regulations.
2. Before using the machine we recommend that you read this instruction manual carefully and completely.
3. Keep this instruction manual in a safe place so that it can be consulted if necessary in the future.
4. Electrical connections and initial starting of the machine should be carried out by a trained personnel.
5. The machine must be used only by qualied persons, who have been trained with the contents of this
instruction manual.
6. The manufacturer declines all responsibility for any injuries to persons or damage to objects caused by
tampering with the machine.
7. The machine must be used only for the purpose for which it has been designed any other use is to be
considered dangerous, and responsibility for any injury or damage caused by improper use cannot be
attributed to the manufacturer or its distributors.
8. It is strictly prohibited to insert objects, utensils, hands or ngers inside spaces containing moving
mechanical parts.
9. Although the machine is fully equipped with safety systems, loose or long clothing should not be worn.
Jewelry should be gathered together, so as to prevent these items from being caught in moving parts.
3
Safety and Warranty
10. The machine and the work area where it is installed must always be kept dry and clean.
11. When the machine is to be cleaned, always disconnect it from the main power supply.
12. When the machine is being used, always dedicate the greatest attention to your work, as to avoid accidents
due to carelessness.
13. Always check that the weight, dimension and type of products to be processed are suitable and do not use
the machine with frozen products.
14. Keep the machine out of reach of children.
15. Periodically check the conditions and wear of electrical cable and parts.
16. Do not overload the machine beyond its capacity.
17. Do not attempt to carry out repairs yourself, consult Omcan at 800-465-0234.
SAFETY DEVICES
Mechanical safety devices:
The FM/3 combination blender-whisk of our own manufacture described in this manual complies with EEC
Directives 89/392, 91/368, 93/44 and 93/68 for protection against mechanical risks.
Electrical safety devices:
Protection devices against electrical risks comply with EEC Directives 73/23 and 93/68, and with CENELEC
EN 60335.64
RESIDUAL RISKS
IMPORTANT: in compliance with section 1.7.3 of EEC Directive 89/392 and subsequent modications,
“warnings against residual risks”, users of the machine are informed that the safety shields tted do not totally
eliminate the risk of cut injuries, even though they may reduce both the possibility and extent of such injuries.
The protection and safety devices comply with all legal requirements.
Technical Specications
BLENDER DIMENSIONS
Height: 90mm
Width: 90mm
Length: 377mm, 450mm, 530mm
MOTOR CHARACTERISTICS
Power Supply Frequency R.P.M. Current PH Power
110V 60Hz 8500-1200rpm/min 5A / 8A 1 625W / 1000W
4
Loading...