Omcan Manufacturing and Distributing Company Inc. and Food Machinery of America, Inc. dba Omcan
are not responsible for any harm or injury caused due to any person’s improper or negligent use of
this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and
not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this
machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any
warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while
in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
1. A top brand fully enclosed compressor is used in the standing refrigerator. The refrigerant R600a or R134a
is an environmentally friendly agent. It features a rational conguration of refrigeration system which
circulates cool air, keeping the temperature even inside the refrigerator.
2. Triple hollow transparent glass is used on the door and body. It features an attractive design, and features
easy access.
3. It has a wide variety of applications in department stores, homes, meeting rooms and sitting rooms.
HANDLING AND INSTALLATION
Handle with care
Unplug wall socket before moving. Never tilt the
refrigerator over 45 degrees during handling.
Sufcient space
To allow for proper air circulation and increased
refrigeration capabilities, the refrigerator must have at
least 4 inches of space between wall and unit.
Away from heat source
Never place the refrigerator near any type of heat
source or in direct sunlight, as it reduces refrigeration
capabilities.
Safety and Warranty
Storage
Always store the refrigerator in a dry place.
Proper ventilation
Always place the refrigerator in an area with good
ventilation. For rst time use, wait at least 2 hours
before plugging into wall socket.
No heavy load
Never put heavy items on top of the refrigerator.
3
Safety and Warranty
No altercations/tampering
Never tamper with or make changes to the
refrigerator. Changes and add-ons should not be
installed to the inside or outside of the refrigerator.
PREPARATION AND POWER SUPPLY
Exclusive power outlet
Power supply should be 220-240V, single phase
AC with exclusive single phase three pin outlet
(250V/10A) and fuse (6A). The power outlet must be
in close proximity to the ground.
Protect cables
Extra caution should be used when handling cables,
as broken or damaged cables can cause sparking
and may result in a re.
Never store ammables and explosives
No explosives or ammables should be stored in,
or in proximity to, the refrigerator, such as gasoline,
alcohol, and adhesives.
After power outage
After a power outage or the unplugging of the
refrigerator, wait at least 5 minutes before plugging it
back in.
Stable location
Unpack and place the refrigerator on at, solid
ground.
No shared power outlets
Refrigerator cable should never share the power
outlet with any other appliance, as cable will overheat
and may result in a re.
No water ushing
Never ush the refrigerator surface. This can cause
leakage, which may result in electrical damage or re.
No spray
Never spray ammables such as paint or coating
near the refrigerator. This may cause re or
malfunction.
No medicine
Medicine should not be stored inside of the
refrigerator.
1 YEAR WARRANTY
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
4
Technical Specications
ModelRS-CN-0270RS-CN-0370RS-CN-0370-S
Rated Input Power (W)410450
Rated Current (A)5.56
Refrigerant & Injection (g)R134a (200)R134a (280)
Refrigeration Temperature2-8°C / 35.6-46.4°F
Rated Frequency (Hz)60
Type of Climate6
Protection ModeI
Lamp Power (W)3 (LED)
Rated Voltage (V)110~
Foaming AgentEPS
Storage Volume (L)270370
Net Weight (kg/lb)163.5 kg / 360.5 lbs.188 kg / 414.5 lbs.
Gross Weight (kg/lb)172 kg / 379.2 lbs.198 kg / 436.5 lbs.
Overall Dimensions LWH
(mm/In)
Packaging Dimensions LWH
(mm/In)
915 x 675 x 1269
36” x 26.6” x 50”
965 x 725 x 1310
38” x 28.5” x 51.6”
1215 x 375 x 1269
47.8” x 14.8” x 50”
1265 x 725 x 1310
49.8” x 28.5” x 51.6”
1215 x 675 x 1275
47.8” x 26.6” x 50.2”
5
Operation
BEFORE USE
• Plug refrigerator into the 110V exclusive socket.
• After the refrigerator is running, conrm that air suction/ltration is in order and that it is sufciently cold.
After checking to make sure the refrigerator is working properly, it may be used.
DIGITAL TEMPERATURE CONTROLLER
Small, integrated digital controller, which is applicable to the compressor of 1 Hp.
Main functions are: Temperature Display/Temperature Control/Manual-Automatic /Light Control/Value Storing/
Self-Testing/Parameter Locking.
FRONT PANEL OPERATION
1. Set temperature: Press button; set temperature will be displayed. Press or button to modify and
store the displayed value. Press button to exit the adjustment and display the cold-room temperature.
2. If no button is pressed within 10 seconds, the cold-room temperature will be displayed.
3. Lighting: Press button to activate light in refrigerator; press again to turn off. Manual start/stop defrost:
Press button and hold for 6 seconds to either defrost or to stop defrost.
4. Refrigeration LED: During refrigeration, the LED is on. When the cold room temperature is constant, the
LED is off. During delay start, the LED ashes.
5. Defrost LED: During defrosting, the LED is on. When it stops defrosting, the LED is off. During the delay of
defrost, the LED ashed.
Maintenance
1. Cabinet Cleaning:
a. The product should be maintained and cleaned periodically with power supply disconnected. when
cleaning, use mild-rinsing water or non-corrosive products. Do not wash directly with water faucet.
b. Clean outside of unit using a soft cloth with neutral detergent, and dry with a separate soft cloth.
c. Clean inside racks by removing them from the unit and clean with water.
2. When shutting down unit for a long period of time, take out all food and unplug wall socket. Clean inside
and outside thoroughly, and keep door open to sufciently dry.
3. As glass breaks easily, keep far away from children.
4. Replacement of Lamp in Light Box: If the LED lamp is damaged, it must be replaced by Omcan or its
service agent.
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.