Omcan Food Machinery HLC500 Installation Manual

Vegetable Cutter

Model HLC500

Instruction Manual

Version 1

3115 Pepper Mill Court, Mississauga, ON, L5L 4X5
4450 Witmer Industrial Estates, Unit 4, Niagara Falls, NY, 14305

1-800-465-0234

www.omcan.com

Table of Contents

Model HLC500

Section

General Information

Safety & Warranty

Technical Specications

Installation

Operation

Maintenance

-------------------------------------------------------------------------------------------- 5

----------------------------------------------------------------------------------------- 5 - 6

------------------------------------------------------------------------------------- 6 - 7

-------------------------------------------------------------------------------- 3

---------------------------------------------------------------------------------- 3

Page

-------------------------------------------------------------------------- 4

Troubleshooting

Parts Breakdowns

Electrical Schematics

Warranty Registration

------------------------------------------------------------------------------------- 7

----------------------------------------------------------------------------- 8 - 9

---------------------------------------------------------------------------- 10

---------------------------------------------------------------------------- 11

2

General Information

Omcan Manufacturing and Distributing Company Inc. and Food Machinery Of America, Inc. dba Omcan
are not responsible for any harm or injury caused due to any person’s improper or negligent use of
this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and

not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this
machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any
warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while

in operation.

Safety and Warranty

All numbers and letters in brackets refer to gure 1 unless otherwise stated.

• Never touch sharp blades and moving parts while in operation.

• Never put your hands into the exi-feeder (8F) or the feed hopper (1D).

• Never put your hands into the outlet of the machine.

• The machine may be installed only by authorized specialists.

• Only an authorized specialist is allowed to repair the machine and open the machine housing.

• Remove the locking sleeve (2A) by turning it clockwise using the groove in the fork lifter (6B).

• Always press the red stop button of the machine before tting or removing any cutting tools, feeders, etc.
even if the machine is not moving.

1 YEAR WARRANTY

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of
without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

3

Technical Specications

HP 0.75
Disc Speed 270 RPM
Mouth Opening 7” Diameter
Electrical 110V/60/1
Weight 72.6 lbs
Dimensions (DWH) 21.5” × 11.25” × 29.5”

Fig. 1

4