Omcan Food Machinery FP-CN-158 Installation Manual

Bowl Cutters
Models FP-CN-158, FP-CN-237
Instruction Manual
Version 1
3115 Pepper Mill Court, Mississauga, ON, L5L 4X5 4450 Witmer Industrial Estates, Unit 4, Niagara Falls, NY, 14305
1-800-465-0234
www.omcan.com
Table of Contents
Model FP-CN-158 / Model FP-CN-237
Section
General Information
Safety & Warranty
Technical Specications
Installation
Operation
Maintenance
-------------------------------------------------------------------------------------------- 5
----------------------------------------------------------------------------------------- 5 - 6
------------------------------------------------------------------------------------- 6 - 7
-------------------------------------------------------------------------------- 3
------------------------------------------------------------------------------ 3 - 4
Page
---------------------------------------------------------------------- 4 - 5
Parts Breakdowns
Electrical Schematics
Warranty Registration
------------------------------------------------------------------------------ 8 - 9
---------------------------------------------------------------------------- 10
---------------------------------------------------------------------------- 11
General Information
Omcan Manufacturing and Distributing Company Inc. and Food Machinery of America, Inc. dba Omcan are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and
not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while
in operation.
IMPORTANT: The service manual is based on the user manual. Before servicing, please read user
manual and service manual carefully. The service operation should be implemented by qualied
technician.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damaged to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Safety & Warranty
This machine should only be operated by trained users. Before operating, users should know about the protection measures.
Please turn off and unplug the machine before cleaning and maintenance.
When you remove the protective measures in order to clean and maintain the machine, you should always
proceed with caution.
Damaged power cables may cause electric shock and should be replaced before any further operation.
Please contact Omcan if you need to adjust or maintain the machine.
This machine must not be used to process bones, frozen meat or sh and non-food products.
When the machine is in operation, do not put your hand into the bowl.
SAFETY DEVICES
The cover plays an important role in protecting the user. The cover can only be moved away when the arm is unlocked.
When the arm is unlocked or if the cover is not in place, the machine stops working.
If the power cuts off unexpectedly, the machine must be restarted.
Use the utmost care when using this machine.
Safety & Warranty
1 YEAR WARRANTY
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Technical Specications
FEATURES OF THE MACHINE
This machine is made with 304 stainless steel, it ensures that any components that touch food are clean. The knives are made with 4Cr13 stainless steel, which makes the knives more sharp and efcient. There is also a
stainless steel bottom which can withstand heated product.
COMPONENTS
1. Container.
2. Cover.
3. Arm Lock.
4. Main Body.
5. Power Cable.
6. Feet.
7. Control Panel.
8. Knob for Controlling Speed.
Technical Data
Model Length A
(mm/in)
FP-CN-158 380/15” 280/11” 380/15” 6L/1.5 Gal 1100-2800 750W/1HP 230V/50 20 kg/44 lbs. FP-CN-237 470/18.5” 290/11.5” 435/17” 9L/2 Gal 1100-2800 750W/1HP 230V/50 23 kg/51 lbs.
Width B (mm/in)
Height C (mm/in)
Capacity Speed
(RPM)
Power Voltage Net Weight
Loading...
+ 8 hidden pages