Omcan Food Machinery EF-6L Installation Manual

Attention

z New user or repairing this product must be performed by the experts or qualified person or those

who have gotten the license of installation, or those who are authorized by the manufacturer.

z When installation or maintenance, please obey the following instructions carefully to ensure the

safety use of this appliance.

z Please keep this instruction Manual for future reference, or hand it to next user. z Put off the package to make sure none of the parts is missing or damaged. If there is any doubt

about the product, please do not use it, and consult it to the experts.

z Keep the packing material out of reach of the children to avoid accident( Especially the plastic

bag, screw etc)

z This appliance could be only operated by the person who is familiar with the unit. z When not using the appliance or the operator is absent, please turn off the unit to avoid any

accidental injury or damage.

z When it needs to be repaired, please ask for expert, and use the original fitted spare part. It will

be dangerous if not following the above requirements.

z This appliance is just for commercial using, not for any other use, otherwise, it may be

dangerous.

z Do not rinse the equipment with water directly. z Clean the surface of stainless steel periodically with appropriate method to prevent any damage

brought by oxidization or any other chemical interference.

Warning

1）Any refitting and wrong installation, adjustment and maintenance could lead to property loss and casualty. Please contact the suppler if maintenance is needed and all these must be conducted by authorized professionals.

2) The product must be grounded well for safe. While the oil level is below the minimum indicated level, it may cause a fire.

1. ◆Overviews◆

The EF series electric fryer is one of the kitchen appliances for cooking western f

EF series fryer adopts the international popular style desi gn. The body is made of high quality stainless steel, luxurious and good-looking. The products are equipped with electrical elements from the famous factories so that they are energy-saving and safe. It can be used to cook, fry and warm food. EF series fryer is with comprehensive functions and high quality. It is an ideal assistant and first choice for cooking. Application: Coffee SHOP, PUB, hotel, bread store, western fast food store, breakfast store, combined

restaurant and beer house

2. ◆Main Parameters◆

Model Power supply Power(kW)

EF-6L 110V.60Hz 1.5 6 263×404×284 60~200

EF-6LX2 110V.60Hz 1.5+1.5 6+6 525×404×284 60~200

Volume of oil

Dimension(mm)

tank(L)

Adjustable temperature (℃)

★ Environment of Use

Altitude: ≤3000m Ambient temperature: -15℃~+40℃ Relative humidity: highest monthly average relative humidity is not more than 90% (the lowest average temperature of that month is 25℃)

★ Appearance

2 3

4 5

indicator

temperature controller

electric box

electric heating tube

handle partitio n b o ard

EF-6L (N)

rubber leg

body of fryer

4 3

frying sieve oil tank

cover of the tank

★ Replacement of the oven cabinet

The oven cabinet may be placed against the wall, but the distance to the wall shall be ≥200mm for wiring from the cabinet back and for necessary heat loss. If the cabinet is combined with other kitchen cabinets, the distance between the two cabinets shall be ≥200mm. Keep the oven cabinet level.

★ Circuit connection

There is a 1.5m long power cord for connecting single-phase110v/60Hz power. The power cord has an U.K plug. The grounding wire PE shall be connected to the external grounding. To replace the power cord, please remove the back of electric box. Power cord is fixed on the back of electric box

with the cable locking head.

If the cabinet is combined with other kitchen ovens, connect the isopotential on the cabinet back (with

M6 bolt).

※ Use shall prepare a power switch

Reference for the power switch model

：leakage breaker（C65N-50A/D model 4P）

6. ◆Operation introduction◆

1. Check if the power supply is properly fixed and make sure that the supplied voltage is conforming to

requirement.

2. There is oil level mark inside the tank. Quantity of oil in tank shall be kept in a certain range. “H” shows the

highest level and “L” shows the lowest level. Users can adjust quantity of oil according to need.

3. Plug the machine and then get through power supply, the green indicator is on. Current is flowing to the

machine. Then, revolve the temperature controller clockwise till pointing to the needed temperature degree. It shows that electric heating tube stops working and oil temperature in tank is rise after the red indicator is on and the green indicator is off.

4. Temperature controller can cut off power supply while oil temperature reaches the setting value. It can get

through power supply automatically if oil temperature drops. Both of lights (the red and the green) are on. As the electric heater works again, temperature rises. Again and again, to keep the setting temperature.

5. The cover of tank is designed for keeping warm and clean. Make sure that there is no water on the cover

before put it on the tank in case that water drops into tank and lead to oil splash.

6. The enclosed frying sieves are used for frying small food. There is hook and handle on the sieve. Sink the

sieve in oil when operating. After frying, lift the sieve and hang it in the front notch of tank to filter oil. Users can put large food in tank to fry if the sieve is not large enough.

7. Please revolve the temperature controller anticlockwise till to the limited position and then cut off power

supply for safety sake.

8. Please pour the old oil out of tank when oil temperature cools to normal temperature.

First, cut off power supply and take away the partition board out of tank. And then take the electric box out of the back notch of the bottom box. Put the partition board and electric box on a clean place after they are taken away from the tank, then take out the tank to clean.

9. For safe and enduring use, users should often clear leaving in oil tank and dirt on electric heating tube to keep

both of them clean.

10. The partition board is designed for protecting the electric heating board. Put the partition board into oil tank

when frying. There is a temperature limiter in the electric box. The limited temperature is 230℃, reset temperature is 170℃.

+ 4 hidden pages