Omcan RS-CN-0009-P Operators Manual

Refrigerated Topping Rails

Models RS-CN-0004-P, 0005-P, 0006-P, 0009-P

Items *40535, 40536, *39594, *39595

Instruction Manual

Revised - 08/15/2017

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

*QPS

approved

Table of Contents

Model RS-CN-0004-P / Model RS-CN-0005-P Model RS-CN-0006-P / Model RS-CN-0009-P

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

Troubleshooting

----------------------------------------------------------------------------------------------------- 6 - 8

----------------------------------------------------------------------------------------------------- 9 - 10

----------------------------------------------------------------------------------------------------- 10

----------------------------------------------------------------------------------------- 3 - 4

---------------------------------------------------------------------------------------- 4 - 6

------------------------------------------------------------------------------------------------- 11

Page

---------------------------------------------------------------------------------------- 6

Instructions Français

Instrucciones en Español

Parts Breakdown

Electrical Schematics

Warranty Registration

------------------------------------------------------------------------------------ 13 - 19

----------------------------------------------------------------------------------------- 27 - 29

------------------------------------------------------------------------------------------ 30

----------------------------------------------------------------------------------------- 31

------------------------------------------------------------------------------- 19 - 27

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

Position on a at, stable surface. A service agent/qualied technician should carry out installation and any repairs if required. Do not remove any components or service panels on this product. Consult Local and

National Standards to comply with the following:

• Health and Safety at Work Legislation.

• Fire Precautions.

• IEE Wiring Regulations.

• Building Regulations.

Safety and Warranty

• The appliance is intended for commercial use.

• DO NOT attempt to service the item yourself.

• DO NOT use damaged appliances. If you are in any doubt, consult Omcan.

• DO NOT use electrical appliances inside the appliance (e.g. heaters, ice-cream makers etc.), unless they

are of the type recommended by the manufacturer.

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

• DO NOT use mechanical device or other means to accelerate the defrosting process, other than those

recommended by the manufacturer.

• DO NOT damage the refrigerant circuit.

• DO NOT stand or support yourself on the appliance or glass panel.

• DO NOT allow oil or fat to come into contact with the plastic components. Clean immediately if contact

occurs.

• DO NOT place combustion, explosive or volatile article, corrosive acid or alkali, or liquid into the unit.

• DO NOT use this appliance to store medical supplies.

• DO NOT use jet/pressure washers to clean the appliance.

• DO NOT allow children to play with the packaging, and destroy plastic bags safely.

• Always carry, store and handle the appliance in a vertical position and move by holding the base of the

appliance.

• Always switch off and disconnect the power supply to the unit before cleaning.

• Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of

local authorities.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in order to avoid a hazard.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• For indoor used only. Not suitable for installation in an area where a water jet could be used. Must not be

cleaned by a water jet.

• To guarantee safe operation, ensure that the appliance is set up and connected as described in the instruction manual.

• Any repairs and work on the appliance should only be carried out by the customer service department.

• Do not store explosive substances such as aerosol cans with a ammable propellant in this appliance.

1 YEAR PARTS AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of

Safety and Warranty

without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specications

Model RS-CN-0004-P RS-CN-0005-P RS-CN-0006-P RS-CN-0009-P Rated Power

Input Rated Current 1.2A 1.3A Consumption 1.2 kw/h (24h) 1.3 kw/h (24h) 1.4 kw/h (24h) Refrigerant R134a (120g) R134a (125g) R134a (130g) R134a (155g) Rated

Frequency Rated Voltage 125 VAC Volume 45 L / 1.6 cu. ft. 50 L / 1.8 cu. ft. 60 L / 2.1 cu. ft. 70 L / 2.5 cu. ft. Temperature 2 - 10°C / 35.6 - 50°F Foaming

Agent Net Weight 99.2 lbs. / 45 kgs. 114.6 lbs. / 52 kgs. 121.3 lbs. / 55 kgs. 143.3 lbs. / 65 kgs.

47.2” x 15.6” x 8.9” 55.1” x 15.6” x 8.9” 59” x 15.6” x 8.9” 78.7” x 15.6” x 8.9”

Dimensions

1200 x 395 x 225mm 1400 x 395 x 225mm 1500 x 395 x 225mm 2000 x 395 x 225mm

Protection Class

Noise 56dB Item Number 40535 40536 39594 39595

160W

50Hz

CP/IP

Installation

1. Remove the appliance from the packaging. Make sure that all protective plastic lm and coatings are thoroughly removed from all surfaces. To prevent injury or damage to the unit, the appliance should be unpacked and set up by two people.

2. Maintain a distance of 20cm (7 inches) between the unit and walls or other objects for ventilation. Increase

Installation

this distance if the obstacle is a heat source.

3. Level the appliance by adjusting the screw feet. It should be placed on the level solid surface to reduce the vibration and noise.

4. The ambient temperature must be between 10-32°C/50-89.6°F (Climatic Class 4). Avoid locating it in direct sunlight or near heat source such as an oven or a radiator.

5. Please make sure the appliance is properly ventilated.

6. Power supply and voltage at the operating point that complies with the details on the rating label. The plug must be accessible after installation.

7. Correctly connect and disconnect the plug. When insert the plug, it must be plugged tightly when pulling out the plug, the plug should be held by hand. Never pull the supply cord directly.

8. If the showcase is to be shut down for long period, switch it off and disconnect the plug from socket outlet. Clean the appliance and leave the lid open to prevent odor.

9. Important! For your personal safety, this appliance must be properly grounded. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is

properly grounded and installed. Consult a qualied electrician or service center if you do not completely

understand the grounding instructions. If doubt exits as to whether the appliance is properly grounded,

have a qualied electrician check the circuit to make sure the outlet is properly grounded.

10. If the cable does not reach the nearest socket, either rearrange your store layout or ask a qualied electrician to x a new socket. Do not use an extension cord.

11. If power is cut off, wait for at least 3 minutes before restart the unit to avoid damaging the compressor.

INSTALLATION OF FIT GLASS PANELS

ATTENTION: RISK OF BREAK WITH THE GLASS PANEL.

Note: Ensure the hole in the collar for the grub screw faces inwards. Note: Ensure the screw hole furthest from the edge of the panel goes to the back of the appliance. Note: Ensure the soft end of the grub screw is the end making contact with the glass.

Note: Ensure the short end of the bolt assembly is on the outside of the panels. Note: The glass panel must not be used as shelf.

1. Unpack the wooden/carton box carefully; it’s recommended to do this work with two people.

2. Screw the collars to the rim of the appliance.

3. Slot the two side panels into the collars, with the holes in the glass at the top.

4. Screw a grub screw into each collar to secure the panels.

5. Slot the rear panel into the collars, with the holes in the glass at the top.

6. Screw a grub screw into each collar to secure the panel.

7. Slot the plastic bushes into each of the holes.

8. Screw the brackets to the inside of each panel using the bolt assemblies.

9. Place the top panel onto the brackets, ensuring all holes line up.

10. Insert the bush and attach the top panel to the brackets with the bolt assemblies.

Installation

GLASS PANEL ASSEMBLY GUIDE

Operation

STORING FOOD

To get the best results from your appliance, follow these instructions: Only store foodstuffs in the appliance when it has reached the correct operating temperature. Ensure GN container bays are full at all times, even if

the GN containers are unused or empty. Empty bays will greatly reduce efciency of the appliance.

TURN ON

1. Ensure the power switch is set to [O] and turn on at the socket.

2. Switch on the Power [I]. The current temperature within the appliance is displayed.

3. The on the control panel ash for 3 min for anti-short cycle delay between the motor compressor stop and

the following restart.

TEMPERATURE SETTING AND CONTROL

1. Defrosting light.

2. Compressor operation light.

3. Digital thermostat.

4. Programming key (service agent only).

5. Temperature modication keys.

How to see the set point

1. Push and immediately release the SET key, the set point will be showed.

2. Push and immediately release the SET key or wait about 5s to return to normal visualization.

How to change the set point

1. Push the SET key for more than 2 seconds to change the set point value.

2. The value of the set point will be displayed and the “°C” starts blinking.

3. To change the set value push the UP or DOWN arrows within 10s.

4. To memories the new set point value push the SET key again or waits 10s.

MANUAL DEFROST

The appliance will automatically run a defrost cycle every 12 hours.

Operation

Note: The cycle starts from the time the appliance is initially powered up.

To manually defrost the appliance:

1. Press and hold the DEFROST button for 5 seconds.

2. The defrost cycle will start immediately and the Defrost LED illuminates. The defrost will last 20 minutes.

Note: Starting a manual defrost also resets the automatic defrost timer. The next automatic defrost will start 12 hours after the manual defrost has nished.

Maintenance

ROUTINE MAINTENANCE

Switch off and disconnect from the power supply before cleaning.

• Clean the enclosure and interior of the appliance as often as possible.

• Wash the unit with moist cloth. Never allow the switch, control panel, cable or plug to get wet.

• Do not use abrasive cleaning agents. These can leave harmful residues. Use only mild soapy water.

• Ensure that no cleaning water penetrates into the electrical components.

• Must not be cleaned by a water jet.

• Always wipe dry after cleaning with soft cloth.

• Take care when cleaning the rear of the appliance.

• An agent or qualied technician must carry out repairs if required.

• If the appliance is to be left inactive for long periods, unplug the appliance after having turned the switch to

OFF position, empty the refrigerating compartment and clean thoroughly.

SPECIAL MAINTENANCE

The instructions given in the following paragraph are for SKILLED PERSON.

• Periodically clean the condenser using suitable tools ( vacuum cleaner or soft brushes).

• Check that the electrical connections are not loose.

• Check that the thermostat and the sensor are in proper working order.

• Recommend that an agent or qualied technician clean the condenser.

+ 22 hidden pages