Omcan PT-CN-0711-HC Operators Manual

Refrigerated Sandwich Prep Units

Models PT-CN-0686-HC, 1194-HC, 1524-HC, 1778-HC, 0711-HC,

1194-H, 1537-HC

Items 50045, 50046, 50047, 50048, 50049, 50050, 50051

Instruction Manual

Revised - 08/29/2019

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

Table of Contents

Model PT-CN-0686-HC / Model PT-CN-1194-HC / Model PT-CN-1524-HC

Model PT-CN-1778-HC / Model PT-CN-0711-HC / Model PT-CN-1194-H

Model PT-CN-1537-HC

Section

General Information

Safety and Warranty

Technical Specications

Installation

Maintenance

Troubleshooting

Controller Instructions

----------------------------------------------------------------------------------------------------- 7 - 9

------------------------------------------------------------------------------------------------- 9 - 10

----------------------------------------------------------------------------------------- 3 - 4

---------------------------------------------------------------------------------------- 4 - 5

------------------------------------------------------------------------------------------- 10 - 11

Page

------------------------------------------------------------------------------------ 6 - 7

----------------------------------------------------------------------------------- 12 - 14

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

-------------------------------------------------------------------------------------------------------- 36 - 38

----------------------------------------------------------------------------------------- 15 - 28

------------------------------------------------------------------------------------ 29 - 35

----------------------------------------------------------------------------------------- 39

2

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

3

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

Please pay close attention to the safety notices in this section. Disregarding these notices may lead to serious injury and/or damage to the unit.

ATTENTION

• To minimize shock and re hazards, be sure not to overload outlet. Please designate one outlet for your

unit.

4

Safety and Warranty

• Do not use extension cords.

• Do not put your hands under the unit when the unit is required to be moved.

• When the unit is not in use for a long period of time, please unplug the unit from the outlet.

• After unplugging the unit, wait at least 10 minutes before re-plugging it. Failure to do so could cause

damage to the compressor.

UNPLUG CORD

• To minimize shock and re hazards, please do not plug or unplug the cord with wet hands.

• During maintenance and cleaning, please unplug the unit.

PROPER GROUNDING REQUIRED

• To minimize shock and re hazards, make sure that the unit is properly grounded.

PROHIBITION

• Do not attempt to remove or repair any component unless instructed by factory.

• Make sure that the unit is not resting on or against the electrical cord and plug.

• To minimize personal injury, do not hang on the doors.

• Do not store any ammable and explosive gas or liquids inside the unit.

• Do not attempt to alter or tamper with the electrical cord.

2 YEARS PARTS AND LABOUR / 5 YEARS PARTS ONLY ON COMPRESSOR

WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

5

Technical Specications

REFRIGERATED PREP TABLES

Model PT-CN-0686-HC PT-CN-1194-HC PT-CN-1524-HC PT-CN-1778-HC Temperature Range 0.5°C -5°C / 33°F - 41°F Max Ambient

Temperature Rating

Horsepower 1/5 HP 1/4 HP 3/4 HP

Electrical 110V / 60Hz / 1Ph Amps 2.9A 4.6A 4.8A 8.9A Refrigerant R290 Isolation Material Cyclopentane Cooling System Ventilated

Insert Capacity

Number of Doors 1 2 3 Number of Shelves 1 2 3 Shelf Capacity 44 lbs. / 20 kgs. 40 lbs. / 18 kgs. 52.9 lbs. / 24 kgs. 44 lbs. / 20 kgs.

Cutting Board

Exterior Dimensions

Interior Dimensions

Net Volume 160 L / 5.7 cu.ft. 268 L / 9.5 cu.ft. 428 L / 15.1 cu.ft 440 L / 15.5 cu.ft. Weight 187 lbs. / 85 kgs. 271 lbs. / 123 kgs. 319 lbs. / 145 kgs. 378 lbs. / 172 kgs. Item Number 50045 50046 50047 50048

6 - 1/6 pans 2 - 1/9 pans

27.4” x 10.3” x 0.4” 696 x 262 x 10mm

27.5” x 29.5” x 42.4”

698 x 750 x 1075mm

24” x 23.8” x 23.5”

611 x 605 x 597mm

12 - 1/6 pans

6 - 1/3 pans

47” x 10.3” x 0.4”

1186 x 262 x 10mm

46.9” x 29.5” x 42.4”

1188 x 750 x 1075mm

42.8” x 23.8” x 23.5”

1088 x 605 x 597mm

32°C / 90°F

60.1” x 10.3” x 0.4”

1527 x 262 x 10mm

60” x 29.5” x 42.4”

1529 x 750 x 1075mm

56” x 23.8” x 23.5”

1429 x 605 x 597mm

16 - 1/6 pans 18 - 1/6 pans

70.3” x 10.3” x 0.4”

1786 x 262 x 10mm

70.4” x 29.5” x 42.4”

1787 x 750 x 1075mm

66” x 24” x 23.5”

1687 x 605 x 597mm

6

Technical Specications

MEGA REFRIGERATED PREP TABLES

Model PT-CN-0711-HC PT-CN-1194-H PT-CN-1537-HC Temperature Range 0.5°C ~ 5°C / 33°F ~ 41°F Max Ambient Temperature

Rating

Horsepower 1/5 HP 1/4 HP

Electrical 110V / 60Hz / 1Ph Amps 2.9A 4.6A 4.8A Refrigerant R290 Isolation Material Cyclopentane Cooling System Ventilated Insert Capacity 9 - 1/6 pans 18 - 1/6 pans 21 - 1/6 pans Number of Doors 1 2 Number of Shelves 1 2 Shelf Capacity 77 lbs. / 35 kgs. 158.7 lbs. / 72 kgs. Net Volume 161 L / 5.7 cu.ft. 269 L / 9.5 cu.ft. 425 L / 15 cu.ft.

Exterior Dimensions

Interior Dimensions

Weight 198 lbs. / 90 kgs. 298 lbs. / 135.2 kgs. 330 lbs. / 149.7 kgs. Item Number 50049 50050 50051

27.5” x 34” x 46”

698 x 864 x 1166mm

24” x 23.8” x 23.5”

610 x 605 x 597mm

32°C / 90°F

47” x 34” x 46”

1194 x 864 x 1166mm

42.8” x 23.8” x 23.5”

1088 x 605 x 597mm

60.2” x 34” x 46”

1529 x 864 x 1166mm

56.3” x 23.8” x 23.5”

1430 x 605 x 597mm

Installation

IMPORTANT!!!PLEASE READ BEFORE INSTALLATION

• If the unit has recently been transported. Please let unit stand still for a minimum of 24 hours before

plugging it in.

• Make sure that the unit drops down to desired temperature before loading the unit with product.

• Make sure that there is proper ventilation around the unit in the area where it will operate.

• Make sure all accessories are installed(i.e. shelves, shelf clips, casters) before plugging the unit in.

• Please read through the Operation / Owner’s Manual in its entirety.

CABINET LOCATION GUIDELINES

• Install the unit on strong and leveled surfaces.

- Unit may make unpleasant noises if surface is uneven.

- Unit may malfunction if surface is uneven.

7

Installation

• Install the unit in an indoor, well-ventilated area.

- Unit performs more efciently in a well-ventilated area.

- For best performance, please maintain clearance of 6” on the back of the unit.

- Outdoor use may cause decreased efciency and damage to the unit.

• Avoid installation in a high humidity and/or dusty area.

- Humidity could cause unit to rust and decrease efciency of the unit.

- Dust collected on condenser coil will cause unit to malfunction. Clean the condenser at least once a month with a brush or clean cloth.

- Malfunction due to dirty condenser will void warranty.

• Select a location away from heat and moisture-generating equipment.

- High ambient temperature will cause the compressor to overwork, leading to higher energy bills and

gradual breakdown of the unit.

- Malfunction due to high ambient temperature will void warranty.

ELECTRICAL

Please ensure that the required voltage of the compressor is being supplied at all times. Low or high voltage

can detrimentally affect the refrigeration unit. All units should be plugged into a grounded and properly-sized

electrical outlet with appropriate overcurrent protection. Please refer to the electrical requirement on the nameplate of the unit. Please make sure that your unit has its own dedicated outlet. Do not use an extension

cord.

TEMPERATURE CONTROLS

The temperature controls are factory-set to maintain an average temperature of 38°F in refrigeration. To maintain a different temperature, adjust it on the temperature controller–see manual of temperature controller.

CAUTION

Setting the temperature control to the coldest setting may cause the evaporator coil to freeze and ice up. This will eventually result in a warmer cabinet temperature.

LOADING PRODUCT

Shelves have been factory-installed for your convenience. Before loading shelves, please be sure that all shelf clips are completely fastened in their correct locations. It is important that all shelves rest completely level

before stocking your cabinet with product. In order to maintain correct air ow inside the unit, please be sure

to leave two to four(2 to 4) inches of space between the back wall and stored product. Blocking the evaporator fans will result in a warmer cabinet temperature, and ultimately compressor failure.

DEFROST SYSTEMS

Refrigerator coils are kept below the freezing point(32°F). During compressor down-time, the evaporator fan continues to circulate air through the evaporator coil. This air circulation raises the coil temperature above the

8

Installation

freezing point, melting any accumulated frost. Run-off water is drained into the evaporator pan and evaporated. Freezer coils are defrosted electrically. Automatic defrost timers are built-in to the refrigeration system and may not be adjusted. The defrost timers automatically initiate at pre-set intervals and for a pre-determined duration.

PLEASE NOTE: Excessive door opening should be avoided in order to maintain cabinet temperature and to eliminate the possibility of coil freeze-up.

LOADING FOOD PANS

Pizza prep units and sandwich prep units are designed to function with all pans in place, even if some pans are to be left empty. For maximum food freshness, Fill the pans only with an amount that can be used in a specic

usage period. During non-use, please close the insulated lid cover.

REVERSING THE DOORS (OPTIONAL)

Note: This only applies to the single door units.

Only perform these steps with another person present to ensure the door does not fall over.

1. Open the door.

2. Remove the screws from the top panel, then open the top panel.

3. Remove the screws of the bottom louver, then remove the louver.

4. Unscrew all of the screws from the upper hinge

5. Unscrew all of the screws from the lower hinge and remove the door and hinges.

6. Place the former upper hinge at the bottom of the unit, parallel to where the lower hinge is, do the same with the former lower hinge except for the top. Screw the hinges into place.

7. Reassemble the door so it is facing the opposite direction.

8. Reassemble the top panel and the lower louver.

9. The door is now reversed.

Maintenance

CLEANING THE CONDENSER COIL

• For efcient operation, it is important that the condenser surface be kept free of dust, dirt, and lint.

• We recommend cleaning the condenser coil and ns at least once per month.

• Clean with a commercial condenser coil cleaner, available from any kitchen equipment retailer. Brush the condenser ns from top to bottom, not side to side.

• After cleaning, straighten any bent condenser ns with a n comb.

CLEANING THE FAN BLADE AND MOTOR

• If necessary, clean the fan blades and motor with a soft cloth, If it is necessary to wash the fan blades,

9

Maintenance

cover the fan motor to prevent moisture damage.

CLEANING THE INTERIOR OF UNIT

• When cleaning the cabinet interior, use a solvent of warm water and mild soap.

• Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the stainless steel

surface.

• Wash door gaskets on a regular basis, preferably weekly. Simply remove door gasket from the frame of the door, soak in warm water and soap for thirty (30) minutes, dry with soft cloth, and replace.

• Check door gaskets for proper seal after they are replaced.

• Periodically remove the shelves and pilasters from the unit and clean them with mild soap and warm water. To remove the pilasters, rst remove the shelves and shelf brackets. Then, simply lift the pilaster up and

out.

WARNING

Disconnect power cord before cleaning any parts of the unit.

Troubleshooting

Before requesting any service on your unit, please check the following points. Please note that this

guide serve only as a reference for solutions to common problems.

SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION

Compressor not running. Fuse blown or circuit breaker

tripped.

Power cord unplugged. Plug in power cord.

Thermostat set too high. Set thermostat to lower

Cabinet in defrost cycle. Wait for defrost cycle to nish.

Replace fuse or reset circuit breaker.

Temperature.

10

Troubleshooting

Condensing unit runs for long periods of time.

Cabinet is noisy. Loose part(s). Locate and tighten loose part(s).

Cabinet Temperature Is too warm. Thermostat set too warm. Set thermostat to lower

Excessive amount of warm product

Placed in cabinet. Prolonged door opening or door

ajar.

Door gasket(s) not sealing properly.

Dirty condenser coil. Clean the condenser coil. Evaporator coil iced over. Unplug unit and allow coil to

Tubing vibration. Ensure tubing is free from contact

Blocking air ow. Re-arrange product to allow for

Excessive amount of warm product

Placed in cabinet.

Fuse blown or circuit breaker tripped.

Dirty condenser coil. Clean the condenser coil.

Prolonged door opening or door

ajar.

Evaporator coil iced over. Unplug unit and allow coil to

Allow adequate time for Product to

cool down. Ensure doors are closed when not

in use. Avoid opening doors for long periods of time.

Ensure gaskets are snapped in Completely. Remove gasket and Wash with soap and water.

Check condition of gasket and replace if necessary.

defrost. Make sure thermostat is not set too cold. Ensure that door gasket(s) are sealing properly.

with other tubing or components.

Temperature.

Proper air ow. Make sure there

Is at least four inches of clearance from evaporator.

Allow adequate time for product to

cool down. Replace fuse or reset circuit

breaker.

Ensure doors are closed when not in use. Avoid opening doors for long periods of time.

defrost. Make sure thermostat is not set too cold. Ensure that door gasket(s) are sealing properly.

For service call 1-800-465-0234.

11

Controller Instructions

Digital controller model: PJEZ for cooler

Display and functions

During normal operation, the controller displays the value of the probe set using parameter/4(=1 ambient probe, default, = 2 second probe, = 3 third probe).In addition, the display has LEDs that indicate the activation of the control functions (see Table 1), while the 3 buttons can be used to activate/deactivate some of the functions(see Table 2).

LED’s and Associated Functions (Table 1)

Icon Function Normal Operation Start Up

ON OFF Blink Compressor On Off Request ON Fan On Off Request ON Defrost On Off Request ON Aux Output On Output Off - ON Alarm All No Alarm - ON Clock RTC tted and enabled, at

least 1 time band set

RTC not tted or disabled, not

even 1 time band set

- ON if RTC

tted

12

Controller Instructions

Table of Functions activated by the buttons - Models S, X, Y, C (Table 2)

Button Normal Operation Start Up

Pressing the Button Alone Pressed Together

Up ON/OFF

Down Defrost

Set Mute - 1 sec.: display/set the set

Setting the set point (desired temperature)

More than 3 sec: toggle ON/ OFF

More than 3 sec: start/stop defrost

point.

- more than 3 secs.: access parameter setting menu (enter password )

- mute audible alarm (buzzer)

Start/Stop continuous cycle

- For 1 sec.

-

Pressed

together Start parameter reset procedure

For 1 sec. display

rmware

vers. code

RESET current EZY set

• press SET for 1 sec, the set value will start ashing after a few moments;

• increase or decrease the value using UP or DOWN;

• press SET to conrm the new value.

Switching the device ON/OFF

Press UP for more than 3 sec. The control and defrost algorithms are now disabled and the Instrument displays the message “OFF” alternating with the temperature read by the set probe

Manual defrost

Press for DOWN more than 3 sec (the defrost starts only the temperature conditions are valid).

Continuous cycle

Press UP and DOWN together for more than 3 sec

Access and setting type F (frequent) and type C (conguration) parameters

1. press SET for 3 sec (the display will show “PS”);

2. • to access the type F and C parameter menu, enter the password “22” using UP/DOWN, press SET to

conrm;

• to access the F parameter menu only, press SET (without entering the password);

3. scroll inside the parameter menu using UP/DOWN;

13

Controller Instructions

• to display/set the values of the parameter displayed, press SET, then UP/DOWN and nally SET to conrm the changes (returning to the parameter menu).

To save all the new values and exit the parameter menu, press SET for 3 s; To exit the menu without saving the changed values (exit by timeout) do not press any button for at least 60 s.

REFERENCE

Item Number Model Number Description Manufacturer Model Number

50045 PT-CN-0686-HC

50046 PT-CN-1194-HC

50047 PT-CN-1524-HC

50048 PT-CN-1778-HC

50049 PT-CN-0711-HC

50050 PT-CN-1194-H

50051 PT-CN-1537-HC

Refrigerated Prep Table 27” / 686mm

110V/60/1 ETL cETLus

Refrigerated Prep Table 47” / 1194mm

110V/60/1 ETL cETLus

Refrigerated Prep Table 60” / 1524mm

110V/60/1 ETL cETLus

Refrigerated Prep Table 70” / 1778mm

110V/60/1 ETL cETLus

Refrigerated Prep Table Mega 28” /

711mm 110V/60/1 ETL cETLus

Refrigerated Prep Table Mega 47” /

1194mm 110V/60/1 ETL cETLus

Refrigerated Prep Table Mega 61” /

1537mm 110V/60/1 ETL cETLus

SCL1-HC

SCL2-HC

SCL2-60-HC

SCL3-HC

SCLM1-HC

SCLM2-HC

SCLM2-60-HC

14

Model PT-CN-0686-HC 50045

Parts Breakdown

15

Parts Breakdown

Model PT-CN-0686-HC 50045

Item No. Description Position Item No. Description Position Item No. Description Position

AB248 Cabinet for SCL1-HC 1 AA118 Evaporator for SCL1-HC 19 AA208

AB249 Door for SCL1-HC 2 AB262 Fan Motor Installation Panel for SCL1-HC 20 AA207 Condenser Fan Cover for SCL1-HC 38

AB250 Gasket for SCL1-HC 3 AB263

AA955 Spring Hinge Board for SCL1-HC 4 AB264

AA388 Axis Cover for SCL1-HC 5 AA128 Evaporator Fan Motor for SCL1-HC 23 AB274 Outer Drain Pan for SCL1-HC 41

AA360 Bottom Right Hinge for SCL1-HC 6 AB265 Stand Off Bracket for SCL1-HC 24 64167 Compressor for SCL1-HC 42

AA359 Upper Right Hinge for SCL1-HC 7 AB266

AB251 Top Board for SCL1-HC 8 AB267 Thermostat for SCL1-HC 26 AB276 K Strip-2 Holes for SCL1-HC 47

AB252 Cutting Board for SCL1-HC 9 AB268 Pan Bracket-15 for SCL1-HC 27 AB277 K Strip-3 Holes for SCL1-HC 48

AB253 Fixer for Cutting Board for SCL1-HC 10 AB269 Pan Bracket-25 for SCL1-HC 28 AB278 K Clip for SCL1-HC 49

AB254 Back Cover for SCL1-HC 11 AB270 Castor Support for SCL1-HC 29 AB279 Shelf for SCL1-HC 50

AB255 Lid for SCL1-HC 12 AA584 4" Castor with Brake for SCL1-HC 30 AB280 Back Grill for SCL1-HC 51

AB256 Dowel for SCL1-HC 13 AA743 4" Castor for SCL1-HC 31 AB169 Foaming Hole Cover for SCL1-HC 52

AB257 Plastic Bolt for SCL1-HC 14 AB271 Assembling Panel Support for SCL1-HC 32 AA133 Drain Hose for SCL1-HC 53

AB258 Nut for SCL1-HC 15 AB272 Compressor Unit Track for SCL1-HC 33 AA135 Power Cord for SCL1-HC 54

AB259 Split Pin for SCL1-HC 16 AB273

AB260 Evaporator Cover for SCL1-HC 17 AB159 Condenser for SCL1-HC 35 AA596 Thermometer for SCL1-HC 56

AB261 Inner Drain Pan for SCL1-HC 18 AA607 Condenser Fan Motor for SCL1-HC 36

Left Clapboard of Evaporator for SCL1-HC

Right Clapboard of Evaporator for SCL1-HC

Thermostat Installation Board for SCL1-HC

Compressor Unit Installation Board for SCL1-HC

21 AA129 Filter Fixer for SCL1-HC 39

22 AA371 Filter for SCL1-HC 40

25 AB275 Starter Kit for SCL1-HC 43 - 46

34 AA379

Blade of Condenser Fan Motor for SCL1-HC

Temperature Sensor of Cabinet Inside for SCL1-HC

37

55

16

Model PT-CN-1194-HC 50046

Parts Breakdown

17

Parts Breakdown

Model PT-CN-1194-HC 50046

Item No. Description Position Item No. Description Position Item No. Description Position

AB307 Cabinet for SCL2-HC 1 AB259 Split Pin for SCL2-HC 20 AB213 Condenser for SCL2-HC 39

AB308 Right Door for SCL2-HC 2 AB314 Evaporator Cover for SCL2-HC 21 AB049 Condenser Fan Motor for SCL2-HC 40

AB197 Gasket for SCL2-HC 3 AB315 Inner Drain Pan for SCL2-HC 22 AA208

AA955 Spring Hinge Board for SCL2-HC 4 AA150 Evaporator for SCL2-HC 23 AA207 Condenser Fan Cover for SCL2-HC 42

AA388 Axis Cover for SCL2-HC 5 AB316 Fan Motor Installation Panel for SCL2-HC 24 AA129 Filter Fixer for SCL2-HC 43

AA360 Bottom Right Hinge for SCL2-HC 6 AB317

AA359 Upper Right Hinge for SCL2-HC 7 AB318

AB309 Left Door for SCL2-HC 8 AA128 Evaporator Fan Motor for SCL2-HC 27 64168 Compressor for SCL2-HC 46

AB197 Gasket for SCL2-HC 9 AB319 Stand Off Bracket for SCL2-HC 28 AB329 Starter Kit for SCL2-HC 47 - 50

61468 Bottom Left Hinge for SCL2-HC 10 AB320

AB200 Upper Left Hinge for SCL2-HC 11 AB321 Thermostat for SCL2-HC 30 AB331 K Strip-3 Holes for SCL2-HC 52

AB310 Top Board for SCL2-HC 12 AB322 Pan Bracket-15 for SCL2-HC 31 AB332 K Clip for SCL2-HC 53

AB311 Cutting Board for SCL2-HC 13 AB323 Pan Bracket-25 for SCL2-HC 32 AB220 Shelf for SCL2-HC 54

AB253 Fixer for Cutting Board for SCL2-HC 14 AB324

AB312 Back Cover for SCL2-HC 15 AA584 4" Castor with Brake for SCL2-HC 34 AB169 Foaming Hole Cover for SCL2-HC 56

AB313 Lid for SCL2-HC 16 AA743 4" Castor for SCL2-HC 35 AA133 Drain Hose for SCL2-HC 57

AB256 Dowel for SCL2-HC 17 AB325 Assembling Panel Support for SCL2-HC 36 AA135 Power Cord for SCL2-HC 58

AB257 Plastic Bolt for SCL2-HC 18 AB326 Compressor Unit Track for SCL2-HC 37 AA379

AB258 Nut for SCL2-HC 19 AB327

Left Clapboard of Evaporator for SCL2-HC

Right Clapboard of Evaporator for SCL2-HC

Thermostat Installation Board for SCL2-HC

Castor Support for SCL2-HC 33 AB333 Back Grill for SCL2-HC 55

Compressor Unit Installation Board for SCL2-HC

25 AA371 Filter for SCL2-HC 44

26 AB328 Outer Drain Pan for SCL2-HC 45

29 AB330 K Strip-2 Holes for SCL2-HC 51

38 AA596 Thermometer for SCL2-HC 60

Blade of Condenser Fan Motor for SCL2-HC

Temperature Sensor of Cabinet Inside for SCL2-HC

41

59

18

Model PT-CN-1524-HC 50047

Parts Breakdown

19

Parts Breakdown

Model PT-CN-1524-HC 50047

Item No. Description Position Item No. Description Position Item No. Description Position

AB361 Cabinet for SCL2-60-HC 1 AB259 Split Pin for SCL2-60-HC 20 AB213 Condenser for SCL2-60-HC 39

AB362 Right Door for SCL2-60-HC 2 AB369 Evaporator Cover for SCL2-60-HC 21 AB049 Condenser Fan Motor for SCL2-60-HC 40

AB363 Gasket for SCL2-60-HC 3 AB370 Inner Drain Pan for SCL2-60-HC 22 AA208

AA955 Spring Hinge Board for SCL2-60-HC 4 AA171 Evaporator for SCL2-60-HC 23 AA207 Condenser Fan Cover for SCL2-60-HC 42

AA388 Axis Cover for SCL2-60-HC 5 AB371

AA360 Bottom Right Hinge for SCL2-60-HC 6 AB372

AA359 Upper Right Hinge for SCL2-60-HC 7 AB373

AB364 Left Door for SCL2-60-HC 8 AA128 Evaporator Fan Motor for SCL2-60-HC 27 64168 Compressor for SCL2-60-HC 46

AB363 Gasket for SCL2-60-HC 9 AB374 Stand Off Bracket for SCL2-60-HC 28 AB384 Starter Kit for SCL2-60-HC 47 - 50

61468 Bottom Left Hinge for SCL2-60-HC 10 AB375

AB200 Upper Left Hinge for SCL2-60-HC 11 AB376 Thermostat for SCL2-60-HC 30 AB386 K Strip-3 Holes for SCL2-60-HC 52

AB365 Top Board for SCL2-60-HC 12 AB377 Pan Bracket-15 for SCL2-60-HC 31 AB387 K Clip for SCL2-60-HC 53

AB366 Cutting Board for SCL2-60-HC 13 AB378 Pan Bracket-25 for SCL2-60-HC 32 AB388 Shelf for SCL2-60-HC 54

AB253 Fixer for Cutting Board for SCL2-60-HC 14

AB367 Back Cover for SCL2-60-HC 15 AA584 4" Castor with Brake for SCL2-60-HC 34 AB169 Foaming Hole Cover for SCL2-60-HC 56

AB368 Lid for SCL2-60-HC 16 AA743 4" Castor for SCL2-60-HC 35 AB133 Drain Hose for SCL2-60-HC 57

AB256 Dowel for SCL2-60-HC 17 AB380

AB257 Plastic Bolt for SCL2-60-HC 18 AB381 Compressor Unit Track for SCL2-60-HC 37 AA379

AB258 Nut for SCL2-60-HC 19 AB382

AB379 Castor Support for SCL2-60-HC 33 AB389 Back Grill for SCL2-60-HC 55

Fan Motor Installation Panel for SCL260-HC

Left Clapboard of Evaporator for SCL260-HC

Right Clapboard of Evaporator for SCL2-60-HC

Thermostat Installation Board for SCL260-HC

Assembling Panel Support for SCL260-HC

Compressor Unit Installation Board for SCL2-60-HC

24 AA129 Filter Fixer for SCL2-60-HC 43

25 AA371 Filter for SCL2-60-HC 44

26 AB383 Outer Drain Pan for SCL2-60-HC 45

29 AB385 K Strip-2 Holes for SCL2-60-HC 51

36 AA135 Power Cord for SCL2-60-HC 58

38 AA596 Thermometer for SCL2-60-HC 60

Blade of Condenser Fan Motor for SCL2-60-HC

Temperature Sensor of Cabinet Inside for SCL2-60-HC

41

59

20

Model PT-CN-1778-HC 50048

Parts Breakdown

21

Parts Breakdown

Model PT-CN-1778-HC 50048

Item No. Description Position Item No. Description Position Item No. Description Position

AB433 Cabinet for SCL3-HC 1 AB440 Evaporator Cover for SCL3-HC 21 AB213 Condenser for SCL3-HC 41

AB434 Right Door for SCL3-HC 2 AB441 Inner Drain Pan for SCL3-HC 22 AB049 Condenser Fan Motor for SCL3-HC 42

AB197 Gasket for SCL3-HC 3 AA171 Evaporator for SCL3-HC 23 AA208

AA955 Spring Hinge Board for SCL3-HC 4 AB442 Fan Motor Installation Panel for SCL3-HC 24 AA207 Condenser Fan Cover for SCL3-HC 44

AA388 Axis Cover for SCL3-HC 5 AB443

AA360 Bottom Right Hinge for SCL3-HC 6 AB444

AA359 Upper Right Hinge for SCL3-HC 7 AA128 Evaporator Fan Motor for SCL3-HC 27 AB455 Outer Drain Pan for SCL3-HC 47

AB435 Left Door for SCL3-HC 8 AB445 Stand Off Bracket for SCL3-HC 28 64170 Compressor for SCL3-HC 48

AB363 Gasket for SCL3-HC 9 AB446

61468 Bottom Left Hinge for SCL3-HC 10 AA124 Power Switch for SCL3-HC 30 AB457 K Strip-2 Holes for SCL3-HC 53

AB200 Upper Left Hinge for SCL3-HC 11 AB447 Thermostat for SCL3-HC 31 AB458 K Strip-3 Holes for SCL3-HC 54

AB436 Top Board for SCL3-HC 12 AB448 Pan Bracket-15 for SCL3-HC 32 AB459 K Clip for SCL3-HC 55

AB437 Cutting Board for SCL3-HC 13 AB449 Pan Bracket-25 for SCL3-HC 33 AB460 Shelf for SCL3-HC 56

AB253 Fixer for Cutting Board for SCL3-HC 14 AB450

AB438 Back Cover for SCL3-HC 15 AB451 Castor Support for SCL3-HC 35 AB169 Foam Hole Cover for SCL3-HC 58

AB439 Lid for SCL3-HC 16 AA584 4" Castor with Brake for SCL3-HC 36 AA133 Drain Hose for SCL3-HC 59

AB256 Dowel for SCL3-HC 17 AA743 4" Castor for SCL3-HC 37 AA135 Power Cord for SCL3-HC 60

AB257 Plastic Bolt for SCL3-HC 18 AB452 Assembling Panel Support for SCL3-HC 38 AA379

AB258 Nut for SCL3-HC 19 AB453 Compressor Unit Track for SCL3-HC 39 AA596 Thermometer for SCL3-HC 62

AB259 Split Pin for SCL3-HC 20 AB454

Left Clapboard of Evaporator for SCL3-HC

Right Clapboard of Evaporator for SCL3-HC

Thermostat Installation Board for SCL3-HC

Pan Bracket-90 for SCL3-HC 34 AB461 Back Grill for SCL3-HC 57

Compressor Unit Installation Board for SCL3-HC

25 AA129 Filter Fixer for SCL3-HC 45

26 AA371 Filter for SCL3-HC 46

29 AB456 Starter Kit for SCL3-HC 49 - 52

40

Blade of Condenser Fan Motor for SCL3-HC

Temperature Sensor of Cabinet Inside for SCL3-HC

43

61

22

Model PT-CN-0711-HC 50049

Parts Breakdown

23

Parts Breakdown

Model PT-CN-0711-HC 50049

Item No. Description Position Item No. Description Position Item No. Description Position

AB281 Cabinet for SCLM1-HC 1 AA118 Evaporator for SCLM1-HC 19 AA208

AB282 Door for SCLM1-HC 2 AB289

AB250 Gasket for SCLM1-HC 3 AB290

AA955 Spring Hinge Board for SCLM1-HC 4 AB291

AA388 Axis Cover for SCLM1-HC 5 AA128 Evaporator Fan Motor for SCLM1-HC 23 AB301 Outer Drain Pan for SCLM1-HC 41

AA360 Bottom Right Hinge for SCLM1-HC 6 AB292 Stand Off Bracket for SCLM1-HC 24 64167 Compressor for SCLM1-HC 42

AA359 Upper Right Hinge for SCLM1-HC 7 AB293

AB283 Top Board for SCLM1-HC 8 AB294 Thermostat for SCLM1-HC 26 AB303 K Strip-2 Holes for SCLM1-HC 47

AB284 Cutting Board for SCLM1-HC 9 AB295 Pan Bracket-15 for SCLM1-HC 27 AB304 K Strip-3 Holes for SCLM1-HC 48

AB253 Fixer for Cutting Board for SCLM1-HC 10 AB296 Pan Bracket-25 for SCLM1-HC 28 AB305 K Clip for SCLM1-HC 49

AB285 Back Cover for SCLM1-HC 11 AB297 Castor Support for SCLM1-HC 29 AB279 Shelf for SCLM1-HC 50

AB286 Lid for SCLM1-HC 12 AA584 4" Castor with Brake for SCLM1-HC 30 AB306 Back Grill for SCLM1-HC 51

AB256 Dowel for SCLM1-HC 13 AA743 4" Castor for SCLM1-HC 31 AB169 Foaming Hole Cover for SCLM1-HC 52

AB257 Plastic Bolt for SCLM1-HC 14 AB298 Assembling Panel Support for SCLM1-HC 32 AA133 Drain Hose for SCLM1-HC 53

AB258 Nut for SCLM1-HC 15 AB299 Compressor Unit Track for SCLM1-HC 33 AA135 Power Cord for SCLM1-HC 54

AB259 Split Pin for SCLM1-HC 16 AB300

AB287 Evaporator Cover for SCLM1-HC 17 AB159 Condenser for SCLM1-HC 35 AA596 Thermometer for SCLM1-HC 56

AB288 Inner Drain Pan for SCLM1-HC 18 AA607 Condenser Fan Motor for SCLM1-HC 36

Fan Motor Installation Panel for SCLM1-HC

Left Clapboard of Evaporator for SCLM1-HC

Right Clapboard of Evaporator for SCLM1-HC

Thermostat Installation Board for SCLM1-HC

Compressor Unit Installation Board for SCLM1-HC

20 AA207 Condenser Fan Cover for SCLM1-HC 38

21 AA129 Filter Fixer for SCLM1-HC 39

22 AA371 Filter for SCLM1-HC 40

25 AB302 Starter Kit for SCLM1-HC 43 - 46

34 AA379

Blade of Condenser Fan Motor for SCLM1-HC

Temperature Sensor of Cabinet Inside for SCLM1-HC

37

55

24

Model PT-CN-1194-H 50050

Parts Breakdown

25

Parts Breakdown

Model PT-CN-1194-H 50050

Item No. Description Position Item No. Description Position Item No. Description Position

AB334 Cabinet for SCLM2-HC 1 AB259 Split Pin for SCLM2-HC 20 AB213 Condenser for SCLM2-HC 39

AB335 Right Door for SCLM2-HC 2 AB341 Evaporator Cover for SCLM2-HC 21 AB049 Condenser Fan Motor for SCLM2-HC 40

AB197 Gasket for SCLM2-HC 3 AB342 Inner Drain Pan for SCLM2-HC 22 AA208

AA955 Spring Hinge Board for SCLM2-HC 4 AA150 Evaporator for SCLM2-HC 23 AA207 Condenser Fan Cover for SCLM2-HC 42

AA388 Axis Cover for SCLM2-HC 5 AB343

AA360 Bottom Right Hinge for SCLM2-HC 6 AB344

AA359 Upper Right Hinge for SCLM2-HC 7 AB345

AB336 Left Door for SCLM2-HC 8 AA128 Evaporator Fan Motor for SCLM2-HC 27 64168 Compressor for SCLM2-HC 46

AB197 Gasket for SCLM2-HC 9 AB346 Stand Off Bracket for SCLM2-HC 28 AB356 Starter Kit for SCLM2-HC 47 - 50

61468 Bottom Left Hinge for SCLM2-HC 10 AB347

AB200 Upper Left Hinge for SCLM2-HC 11 AB348 Thermostat for SCLM2-HC 30 AB358 K Strip-3 Holes for SCLM2-HC 52

AB337 Top Board for SCLM2-HC 12 AB349 Pan Bracket-15 for SCLM2-HC 31 AB359 K Clip for SCLM2-HC 53

AB338 Cutting Board for SCLM2-HC 13 AB350 Pan Bracket-25 for SCLM2-HC 32 AB220 Shelf for SCLM2-HC 54

AB253 Fixer for Cutting Board for SCLM2-HC 14

AB339 Back Cover for SCLM2-HC 15 AA584 4" Castor with Brake for SCLM2-HC 34 AB169 Foaming Hole Cover for SCLM2-HC 56

AB340 Lid for SCLM2-HC 16 AA743 4" Castor for SCLM2-HC 35 AA133 Drain Hose for SCLM2-HC 57

AB256 Dowel for SCLM2-HC 17 AB352 Assembling Panel Support for SCLM2-HC 36 AA135 Power Cord for SCLM2-HC 58

AB257 Plastic Bolt for SCLM2-HC 18 AB353 Compressor Unit Track for SCLM2-HC 37 AA379

AB258 Nut for SCLM2-HC 19 AB354

AB351 Castor Support for SCLM2-HC 33 AB360 Back Grill for SCLM2-HC 55

Fan Motor Installation Panel for SCLM2-HC

Left Clapboard of Evaporator for SCLM2-HC

Right Clapboard of Evaporator for SCLM2-HC

Thermostat Installation Board for SCLM2-HC

Compressor Unit Installation Board for SCLM2-HC

24 AA129 Filter Fixer for SCLM2-HC 43

25 AA371 Filter for SCLM2-HC 44

26 AB355 Outer Drain Pan for SCLM2-HC 45

29 AB357 K Strip-2 Holes for SCLM2-HC 51

38 AA596 Thermometer for SCLM2-HC 60

Blade of Condenser Fan Motor for SCLM2-HC

Temperature Sensor of Cabinet Inside for SCLM2-HC

41

59

26

Model PT-CN-1537-HC 50051

Parts Breakdown

27

Parts Breakdown

Model PT-CN-1537-HC 50051

Item No. Description Position Item No. Description Position Item No. Description Position

AB406 Cabinet for SCLM2-60-HC 1 AB259 Split Pin for SCLM2-60-HC 20 AB213 Condenser for SCLM2-60-HC 39

AB407 Right Door for SCLM2-60-HC 2 AB413 Evaporator Cover for SCLM2-60-HC 21 AB049 Condenser Fan Motor for SCLM2-60-HC 40

AB363 Gasket for SCLM2-60-HC 3 AB414 Inner Drain Pan for SCLM2-60-HC 22 AA208

AA955 Spring Hinge Board for SCLM2-60-HC 4 AA171 Evaporator for SCLM2-60-HC 23 AA207 Condenser Fan Cover for SCLM2-60-HC 42

AA388 Axis Cover for SCLM2-60-HC 5 AB415

AA360 Bottom Right Hinge for SCLM2-60-HC 6 AB416

AA359 Upper Right Hinge for SCLM2-60-HC 7 AB417

AB408 Left Door for SCLM2-60-HC 8 AA128 Evaporator Fan Motor for SCLM2-60-HC 27 64168 Compressor for SCLM2-60-HC 46

AB363 Gasket for SCLM2-60-HC 9 AB418 Stand Off Bracket for SCLM2-60-HC 28 AB428 Starter Kit for SCLM2-60-HC 47 - 50

61468 Bottom Left Hinge for SCLM2-60-HC 10 AB419

AB200 Upper Left Hinge for SCLM2-60-HC 11 AB420 Thermostat for SCLM2-60-HC 30 AB430 K Strip-3 Holes for SCLM2-60-HC 52

AB409 Top Board for SCLM2-60-HC 12 AB421 Pan Bracket-15 for SCLM2-60-HC 31 AB431 K Clip for SCLM2-60-HC 53

AB410 Cutting Board for SCLM2-60-HC 13 AB422 Pan Bracket-25 for SCLM2-60-HC 32 AB388 Shelf for SCLM2-60-HC 54

AB253 Fixer for Cutting Board for SCLM2-60-HC 14

AB411 Back Cover for SCLM2-60-HC 15 AA584 4" Castor with Brake for SCLM2-60-HC 34 AB169 Foaming Hole Cover for SCLM2-60-HC 56

AB412 Lid for SCLM2-60-HC 16 AA743 4" Castor for SCLM2-60-HC 35 AA133 Drain Hose for SCLM2-60-HC 57

AB256 Dowel for SCLM2-60-HC 17 AB424

AB257 Plastic Bolt for SCLM2-60-HC 18 AB425 Compressor Unit Track for SCLM2-60-HC 37 AA379

AB258 Nut for SCLM2-60-HC 19 AB426

AB423 Castor Support for SCLM2-60-HC 33 AB432 Back Grill for SCLM2-60-HC 55

Fan Motor Installation Panel for SCLM260-HC

Left Clapboard of Evaporator for SCLM260-HC

Right Clapboard of Evaporator for SCLM2-60-HC

Thermostat Installation Board for SCLM2-60-HC

Assembling Panel Support for SCLM260-HC

Compressor Unit Installation Board for SCLM2-60-HC

24 AA129 Filter Fixer for SCLM2-60-HC 43

25 AA371 Filter for SCLM2-60-HC 44

26 AB427 Outer Drain Pan for SCLM2-60-HC 45

29 AB429 K Strip-2 Holes for SCLM2-60-HC 51

36 AA135 Power Cord for SCLM2-60-HC 58

38 AA596 Thermometer for SCLM2-60-HC 60

Blade of Condenser Fan Motor for SCLM2-60-HC

Temperature Sensor of Cabinet Inside for SCLM2-60-HC

41

59

28

Model PT-CN-0686-HC 50045

Electrical Schematics

29

Electrical Schematics

Model PT-CN-1194-HC 50046

30

Model PT-CN-1524-HC 50047

Electrical Schematics

31

Electrical Schematics

Model PT-CN-1778-HC 50048

32

Model PT-CN-0711-HC 50049

Electrical Schematics

33

Electrical Schematics

Model PT-CN-1194-H 50050

34

Model PT-CN-1537-HC 50051

Electrical Schematics

35

Notes

________________________________________________________________________________________

36

Notes

________________________________________________________________________________________

37

Notes

________________________________________________________________________________________

38

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

https://omcan.com/warranty-registration/

For mailing in Canada

Pour postale au Canada

Por correo en Canadá

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

For mailing in the US

Pour diffusion aux États-Unis

Por correo en los EE.UU.

OMCAN

Niagara Falls, New York

USA, 14305

or email to: service@omcan.com



Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

39

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 5,000 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 5,000 productos con origen a nivel mundial.

Omcan PT-CN-0711-HC Operators Manual

Specifications and Main Features

Frequently Asked Questions

User Manual