Page 1
Potato Peeler
Model PE-BR-0025
Item 20367
Instruction Manual
Revised - 04/18/2018
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: service@omcan.com
www.omcan.com
Page 2
Table of Contents
Model PE-BR-0025
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
-------------------------------------------------------------------------------------------- 7
----------------------------------------------------------------------------------------- 7 - 8
----------------------------------------------------------------------------------------- 8
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 6
Page
-------------------------------------------------------------------------- 7
Troubleshooting
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
------------------------------------------------------------------------------------------------ 14
------------------------------------------------------------------------------------- 9
---------------------------------------------------------------------------- 10 - 12
---------------------------------------------------------------------------- 13
---------------------------------------------------------------------------- 15
2
Page 3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
3
Page 4
General Information
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
Safety and Warranty
ATTENTION
Always unplug the machine before cleaning or maintenance.
IMPORTANT
This equipment is not to be used by persons (including children) with any physical or mental inabilities, or
without operation experience and knowledge, only acquired by means of instruction and supervision of a
security staff.
4
Page 5
Safety and Warranty
IMPORTANT
If the cord is not in a condition to be used, to avoid accidents it must be replaced through the supplier, an
authorized technician or someone qualied for the service.
DANGERS
Some areas of the electric device have parts and terminals that are connected to high voltage. These parts
may cause severe, or even lethal, electrical shocks when touched. Never touch manual commands such
as switches, buttons, keys and knobs with wet hands, wet clothes and/or wet shoes. By not following these
instructions, the operator could be exposed to severe, or even fatal, electrical shocks.
WARNINGS
The operator has to be familiar with the position of the ON / OFF switch to make sure the switch is easily
accessed when necessary. Before any kind of maintenance, physically remove the plug from its socket.
Provide space for comfortable operation to avoid accidents. Water or oil spilled on the oor will be slippery and
dangerous. Make sure the oor is clean and dry. Never use a manual command (switch, buttons, lever) without
full understand of the function. If any work is to be made by two or more persons, coordination signs will have
to be given for each operation step. Every step of the operation shall be taken only if a sign has been made
and responded.
RECOMMENDATIONS
In case of power shortage, immediately turn the machine OFF. Use recommended or equivalent lubricants,
oils or greases. Avoid mechanical shocks as they may cause failures or malfunction. Do not allow water, dirt
or dust to penetrate the mechanical or electrical components of the machine. DO NOT MODIFY the original
characteristics of the machine. DO NOT MODIFY original characteristics of the machine. DO NOT REMOVE,
TEAR OFF OR TAMPER any safety or identication labels of the machine. If any label has been removed or is
no longer legible, contact your nearest dealer for a replacement.
SAFETY PROCEDURES AND NOTES BEFORE SWITCHING THE MACHINE ON
IMPORTANT
Carefully read ALL instructions of this manual before turning the machine ON. Be sure to be familiar with
the instructions and that you understand all information contained in this manual. If you have any questions,
contact your nearest dealer.
DANGER
An electric cable or electric wire with a damaged jacket or bad insulation could cause electrical shocks as well
as electrical leaks. Before using the equipment, check conditions of all wires and cables.
RECOMMENDATIONS
Be sure ALL instructions in this manual have been thoroughly read and understood. Every function and
operational procedure has to be understood by the operator. Any manual command (switch, button or lever)
shall be given only after being sure it is the correct one.
PRECAUTIONS
The electric cable has to be compatible with the power required by the machine. Cables touching the oor or
5
Page 6
Safety and Warranty
close to the machine need to be protected against short circuiting.
ROUTINE INSPECTION
RECOMMENDATIONS
When checking the tension of the belts or chains, DO NOT introduce your ngers between the belts, pulleys,
chain and gears.
PRECAUTIONS
Check the motor and turning or sliding parts of the machine, in case of abnormal noises. Check the tension
of the belts and chains and replace the set when belt, chain or gears show signs of being worn out. When
checking tension belts or chain, DO NOT introduce your ngers between belts, pulleys, chains and gears.
Check protections and safety devices to make sure they are working properly.
1. Unplug the machine when you need to remove any removable part during cleaning, maintenance or any
other operation.
2. Never make use of any tool or instrument that is not originally part of the machine during any operation.
3. Never touch the Abrasive Disc when the machine is working because it can cause injury.
4. Keep hands away from moving parts.
5. When replacing the Abrasive Disc, ensure that it perfectly ts into the Central Shaft Pin to avoid damages
to the machine.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
6
Page 7
Technical Specications
Model PE-BR-0025
HP 1 HP
Consumption 0.73 kW/h
Capacity 55 lbs. / 24.9 kgs.
Output 1100 lbs/hr. / 499 kgs/hr.
Electrical 110V/60/1
Weight 99 lbs. / 44.9 kgs.
Dimensions 26.4” x 21.6” x 45.5” / 671 x 549 x 1156mm
Item Number 20367
Installation
The Potato Peeler must be installed onto a stable working surface. Verify the voltage of the power source it will
be connected to (110V). The power cord has two at pins and one round pin for grounding). It is mandatory
that the three pins are properly connected before using the equipment. It is recommended to install the
machine close to a sewer or to canalize the residues by extending the Exit Tube located on the lower part of
the machine.
IMPORTANT
Make sure the Abrasive Disc is well placed on the Central Shaft Pin before switching the machine on.
Check if the Potato Peeler is rm in its position. Install the water entrance and exit. Check if the inner abrasive
disc walls are properly placed. Observe the link attachment with the lock.
Operation
IMPORTANT
Under no circumstances touch the Abrasive Disc when it is in moving. Secure the lid, open the water tap,
set the timer and activate the ON/OFF switch. With the machine on and with water falling at the center of the
abrasive disc, pour the product to be processed inside it. For the PE-BR-0025, put 25 Kg of potatoes at most.
The working time varies from one to ve minutes. If the potatoes are being peeled to irregularly, it is possible
to observe the process through the lid opening. The PE-BR-0025 is designed to process normal shaped
potatoes, any other vegetable with irregular shape will need a manual nishing even after processing. To
remove the peeled product, keep the machine running, shut down the water and open the door by pulling the
lock upwards. Lift it until the side lock and keep the door open. This way the product will be expelled. To close
7
Page 8
Operation
the door, release the side lock by pulling it sideways.
Do not operate the machine with long hair which might touch any part of the machine because it may lead to
serious accidents. Tie your hair up well and/or cover your hair with a scarf. Only trained or skilled personnel
shall operate this machine. NEVER operate the machine without all original safety devices in perfect condition.
Maintenance
Keep the machine clean. Always TURN THE MACHINE OFF by removing the plug from the socket before
cleaning it. Never clean the machine unless it has come to a complete stop. Put all components back to their
functional positions before turning it ON again. Do not place your ngers in between belts, pulleys, chains and
gears.
DANGER
Every maintenance operation is dangerous when the machine is ON. TURN IT OFF BY PULLING THE PLUG
OUT OF THE SOCKET DURING MAINTENANCE.
IMPORTANT
Always remove the plug from the power point in any case of emergency.
CLEANING
To conduct the proper cleaning of the machine, follow the instructions below:
1. Remove the internal lining by lifting it upwards. Clean this part with plenty of water.
2. Turn the empty machine on and let it function for a few minutes while adding water.
3. Switch OFF the machine and unplug it, then wait until the Abrasive Disc has stopped moving completely.
4. Rub the external part of the machine with a wet cloth.
5. Remove the Abrasive Disc by lifting vertically.
6. Use a brush with nylon bristles and plenty of water to clean the disc.
7. Replace the internal lining, minding the lock attachment.
8. Replace the disc on the machine proceeding inversely. Make sure the disc ts proper to the pin of the
central shaft.
IMPORTANT
Never use water jets to wash the machine.
IMPORTANT
Take care of your machine and use it properly and with responsibility. It will bring you benets.
8
Page 9
Troubleshooting
PROBLEMS, CAUSES AND SOLUTIONS
The Potato Peeler was designed to operate with minimum maintenance. However, some irregularities may
occur during its operation due to the natural wear caused by the use of the equipment. If there is any problem
with your machine, check the below table for possible solutions.
Problems Causes Solution
The machine does not turn ON. Power outage. Problem on internal
or external electric circuit of the
machine.
Burnt smell or smoke. Problem on the internal or external
electric circuit of the machine.
The machine turns on but when
the product is placed on the disc, it
stops or spins in low rotation.
Strange noises. Abrasive Disc is misplaced. There
Water leak in the bottom of the
machine.
Skidding belts or problems with the
electric motor.
are damaged ball bearings.
Damaged retainer. Call a qualied technician.
Check if there is power. Call a
qualied technician.
Call a qualied technician.
Call a qualied technician.
Place the Abrasive Disc
appropriately on the Central Shaft
Pin. Call a qualied technician.
ADJUSTMENTS AND REPLACEMENT OF COMPONENTS
The Abrasive Disc is covered with an aluminum oxide layer responsible for the food peeling. After some time,
the aluminum oxide wears out and the efciency of the machine decreases. The Abrasive Disc must then be
replaced.
REFERENCE
Item Number Model Number Description Manufacturer Model Number
20367 PE-BR-0025
Peeler Potato 55 lb / 25 kg 1 HP / 746 W
110V/60/1
DB-25HD
9
Page 10
Parts Breakdown
Model PE-BR-0025 20367
10
Page 11
Model PE-BR-0025 20367
Parts Breakdown
11
Page 12
Parts Breakdown
Model PE-BR-0025 20367
Item No. Description Position Item No. Description Position Item No. Description Position
27686
38143 Screw 5/16x5/16 for DB-25HD 00031.0 27711
30234 Washer L 1/4x1 6 ZB for DB-25HD 00100.7 27712 Ring 10 Din 6799 for DB-25HD 21127.3 27746 Reveting Plate for DB-25HD 34312.9
27687 Logo 145mm for DB-25HD 00167.8 27714 Screw M5x5 DIN 916 INOX for DB-25HD 22786.2 27747
27688 Clamp K22 (T-50R) for DB-25HD 00210.0 27715
27689 Oxid of Aluminum for DB-25HD 00257.7 27716 Key Way 4.76x25 for DB-25HD 25657.9 27749 Door Set for DB-25HD 34339.0
27691 Term. PRE-ISOL.165012 for DB-25HD 00736.6 27717
38142 Moving Poley for DB-25HD 00955.5 27719
27692 Insult Term EF-4228 for DB-25HD 01213.0 27720 Omcan Logo for DB-25HD 27154.3 24025 Abrasive Disc for DB-25HD 34366.8
21838 Sphere with Hole 1/2" for
27693 Washer L.A8,4 ZB for DB-25HD 02730.8 27722 Bearing 6005 DDU for DB-25HD 28584.6 27754
27694 Ring 10x1 DIN 471 for DB-25HD 03115.1 27724 Silicone Protection Cap for DB-25HD 29693.7 27755 Diamond Rubber Plate Set for DB-25HD 35214.4
27695 Allen Screw M6x8 for DB-25HD 03188.7 27725 Timer Tag for DB-25HD 31211.8 27756 Coating Set for DB-25HD 35216.0
16403
27696 Nylon Cover CN-4478 for DB-25HD 03678.1 27727 Water Inlet Set for DB-25HD 33630.0 27758 Side Lock Pin for DB-25HD 35266.7
27697 Knob M5x10mm for DB-25HD 03967.5 27728
27698 Screw M6x16 for DB-25HD 03988.8 27729 Central Shaft for DB-25HD 34133.9 27760 Contactor Sheet (Grey) for DB-25HD 36094.5
27699 Bracer T-18R-Small for DB-25HD 04203.0 27730 Manufactured Hoop (Grey) for DB-25HD 34139.8 65980
27700 Screw M8x20 Din 933 ZB for DB-25HD 04474.1 27731 CS Cabinet DB/DBC-25HD for DB-25HD 34141.0 27761 Nipple/Reduction Set for DB-25HD 36394.4
27710 Glue Kit DB/DP-10/DC for DB-25HD 04636.1 27732
27702
27703 Ring 47x1,75 DIN 472 for DB-25HD 09217.7 27734 Retainer 25x47x10 for DB-25HD 34175.4 27763 Heavy Duty Tag for DB-25HD 38533.6
16416
38144 Belt A 22 for DB-25HD 12945.3 27736 Rubber Protection for DB-25HD 34177.0 38140 Flange Fixacao da Porta for DB-25HD 45231.9
24021 Timer for DB-25HD 14050.3 27737 Nut 7x30x3 for DB-25HD 34179.7 38141 Driven Pulley D.164 Primer for DB-25HD 46047.8
16435 Screw M4x10 for DB-25HD 14463.0 27738 Complete Bottom for DB-25HD 34181.9 65978
30279 Screw B.3,5x9,5 DIN 7971 for DB-25HD 15599.3 27739 Exit Tube for DB-25HD 34198.3 65979 Chave L/D Duplo S/LED for DB-25HD 48557.8
64823 Screw M5x5 DIN 916 for DB-25HD 15725.2 27740 Bottom Closure for DB-25HD 34205.0 78551
27706 Timer Label for DB-25HD 16833.5 27741
27707 Spacer Washer for DB-25HD 16971.4 27742
27708
27709 Screw M8x16 DIN 933 ZB for DB-25HD 19059.4 27744 Door Spacer for DB-25HD 34218.1 65981
Screw Sex UNC1/4"x3/4" RTZB for
DB-25HD
DB-25HD 01661.6 27721 Button for DB-25HD 27551.4 27753 Poly Belt V 12PJ for DB-25HD 34421.4
Washer L 3/8" Stainless Steel for
DB-25HD
Screw M6x20 DIN 963 INOX for
DB-25HD
Screw M6x12 DIN 933 Stainless Steel
for DB-25HD
Screw B.3,5x19 DIN 7971 In for DB25HD
00030.2 38341
03213.1 27726
08779.3 27733
12384.6 27735 Central Crankshaft Pin for DB-25HD 34176.2 27764 Isolation Mould for DB-25HD 44569.0
16973.0 27743 Trigger Spring for DB-25HD 34215.7 65977 Gabinete Completo for DB-25HD 55679.3
Washer 1/4x5/8x1,2mm Stainless Steel
for DB-25HD
Screw M5x10 DIN 933 Stainless Steel
for DB-25HD
Screw M6x30 DIN 933 INOX for DB25HD
Contactor CWM18.10 110V 50/60 for
DB-25HD
Internal Wire 2x1,5x1000mm for
DB-25HD
Cord Holder PG13,5 LC+P/9 for DB25HD
Manufactured Bottom (Sandblasted) for
DB-25HD
Moved Pulley Poly V(Primer) for
DB-25HD
Moving Pulley Poly V(Primer) for
DB-25HD
Manufactured Foot (Sandblasted) for
DB-25HD
Assembled Hoop with Feet for DB-25HD 34210.6 64822 Guide Pin 8x50 DIN 7 M6 for DB-25HD 52276.7
19384.4 27745 Trigger Lid for DB-25HD 34225.4
21081.1 24024 Funnel Lid (MOL.37663.9) for DB-25HD 34305.6
Short Adaptor for D Thread 60x2" for
DB-25HD
24861.4 27748 Nylon Nut for DB-25HD 34330.7
26218.8 27750 Motor Support (Grey) for DB-25HD 34354.4
26323.0 27751
31923.6 27757 Side Lock Lid for DB-25HD 35264.0
34132.0 27759 Side Lock Spring for DB-25HD 35280.2
34165.7 38146
34174.6 27762 Aluminum Oxide No.46 for DB-25HD 36969.1
34209.2 64824 Central Shaft for DB-25HD 52275.9
Trigger Crankshaft with Fold for
DB-25HD
Maintenance / Cleaning Label for
DB-25HD
Motor 1CV 60Hz W FC-95V19 for
DB-25HD
Plate Diamant.4x180x233mm for
DB-25HD
Cabo 3x1,5mm2 C/Plug Tipo "M" for
DB-25HD
Cleaning Maintenance Label for
DB-25HD
Moldura de Isolacao FE006-230 for
DB-25HD
34329.3
34365.0
34686.1
36149.6
36456.8
46811.8
50665.6
56228.9
12
Page 13
Model PE-BR-0025 20367
Electrical Schematics
13
Page 14
Notes
14
Page 15
Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specied below. You can also register online by visiting:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
www.omcan.com/warrantyregistration.html
For mailing in Canada
Pour postale au Canada
Por correo en Canadá
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
For mailing in the US
Pour diffusion aux États-Unis
Por correo en los EE.UU.
OMCAN
Niagara Falls, New York
USA, 14305
or email to: service@omcan.com
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan
15
Page 16
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 3, 500 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 3, 500 productos con origen a nivel mundial.
Loading...