Omcan PE-BR-0010 Service Manual

Peelers

Model PE-BR-0010

Item 13443

Instruction Manual

Revised - 06/01/2018

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

Table of Contents

Model PE-BR-0010

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

-------------------------------------------------------------------------------------------- 6

----------------------------------------------------------------------------------------- 6 - 7

----------------------------------------------------------------------------------------- 7

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 5

Page

-------------------------------------------------------------------------- 6

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

------------------------------------------------------------------------------------------- 12 - 14

----------------------------------------------------------------------------- 8 - 10

---------------------------------------------------------------------------- 11

---------------------------------------------------------------------------- 15

2

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

3

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

MAIN PRECAUTIONS

• The Peeler must be used and handled with care.

• BEFORE cleaning disconnect machine from power source.

• NEVER use tools not belonging to machine to help operation.

• The abrasive plate must be perfectly tted onto central shaft pin.

• BE CAREFUL when handling the abrasive plate, it is heavy and may hurt if dropped.

4

Safety and Warranty

• DO NOT put your hands inside machine during operation.

• NEVER connect power source with wet hands nor wet clothes.

• NEVER spray water or other liquid substances directly at motor, power switch or any other electrical

components.

• ALWAYS install equipment in working area with adequate light and space away from children and visitors.

• NEVER operate without all warning labels attached and owner/operator manual available to operator.

• NEVER leave unattended while operating.

• ALWAYS ground machine properly.

• DO NOT process frozen foods or other products other than potatoes and carrots.

• NEVER lift lid before being sure abrasive plate is completely still.

GENERAL ADVICE

• ALWAYS turn machine off before cleaning and maintenance.

• PROVIDE enough space around machine to avoid accidents.

• ALWAYS keep the oor dry. Wet oors may cause slips.

• ALWAYS turn machine off in case of power supply lack.

• NEVER let dust or water to get into electrical and mechanical components of the machine.

• DO NOT modify original features of the machine.

• DO NOT take out nor tear off any safety or identication label.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see www.omcan.com/warranty.html for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

5

Technical Specications

Model PE-BR-0010 Horsepower 0.5 HP

Capacity 22 lbs.

Output (approx.) 440 lbs/hr.

Electrical 110V/60/1 Weight 75 lbs. Dimensions 22.8” x 19” x 28” Item Number 13443

Installation

The peeler must be installed on a level, non-skid work surface. During peeling operation food product must be wet. By means of a 3/4” pipe bring water to feeding nipple. As an alternative it is possible to place the machine

below a 3/4” water faucet and let the water ow in during the operation. It is recommended to place the machine near by a water sink to allow wastes to ow out. A drainage pipe may be connected to outlet waste to ow the wastes out to the nearest sink.

Operation

PRE OPERATION

• Check voltage of the machine. The voltage must be the same as the power source voltage.

• Grounding wire must always be connected.

• Check if the machine is rm in its position. Be sure the water inlet pipe and the drainage pipe are installed

properly.

OPERATION

IMPORTANT: BE SURE THE ABRASIVE PLATE IS FIRMLY FITTED ONTO CENTRAL SHAFT PIN.

First of all check if the lid is duly tted on the top of the machine. To start machine turn switch to ON position. Let water ows into the chamber and load it with food product. Water shall then ow out through the waste

outlet. Each load shall not exceed 10 Kg in the Peeler. The peeling time is from 3 to 5 minutes it depends on the hardness of the food product, its size and irregularity.

Check if products are peeled looking through the transparent lid. To remove peeled product from inside the chamber close faucet, place a container under the discharge door and open it, so that the peeled potatoes are

6

Operation

discharged from the chamber under the action of centrifugal force applied by the peeling disc.

IMPORTANT

Under no circumstances touch the Abrasive Disc when it is in moving. Secure the lid, open the water tap, set the timer and activate the ON/OFF switch. With the machine on and with water falling at the center of the abrasive disc, pour the product to be processed inside it. For the PE-BR-0010, put 10 Kg of potatoes at most.

The working time varies from one to ve minutes. If the potatoes are being peeled to irregularly, it is possible

to observe the process through the lid opening. The PE-BR-0010 is designed to process normal shaped

potatoes, any other vegetable with irregular shape will need a manual nishing even after processing. To

remove the peeled product, keep the machine running, shut down the water and open the Door by pulling the lock upwards. Lift it until the side lock and keep the door open. This way the product will be expelled. To close the door, release the side lock by pulling it sideways.

Maintenance

CLEANING

1. Turn OFF the machine and disconnect it from power source.

2. Wait until the abrasive plate is completely still.

3. To lift the abrasive plate out of the cylinder, hold it and pull it up.

4. Wash the machine and the plate with water and neutral soap.

5. To reassemble plate proceed inversely being sure of placing it back on the central shaft pin correctly.

For a fast cleaning, just turn the machine ON without load and let it work with running water.

REFERENCE

Item Number Model Number Description Manufacturer Model Number

13443 PE-BR-0010

Peeler Potato 22 LB / 10 KG

0.5 HP / 373 W 110V/60/1

DB10

7

Parts Breakdown

Model PE-BR-0010 13443

8

Model PE-BR-0010 13443

Parts Breakdown

9

Parts Breakdown

Model PE-BR-0010 13443

Item

Description Position

No.

30319 Screw 1/4x3/8 for DB10 00034.5 66186 Term. Pre-Isol.AN-2434 for DB10 03283.2 38118 Complete Cabinet for DB10 14990.0

30257 Nut UNC 1 4 ZB for DB10 00037.0 16404 Pont Ext Ted 7/8 for DB10 03821.0 38107 CS Cabinet for DB10 14991.8

38119 Washer L 1 2 ZB for DB10 00038.8 30341 Screw Nut 1 4 for DB10 04035.5 30222 Washer 2 78x7x20x25mm for DB10 15093.2

30029 Pression Rivet AD-423-S for DB10 00045.0 30245 Latch for DB10 04439.3 78557 Motor 0.5HP 60HZ for DB10 16203.5

30234 Washer L 1/4x1 6 ZB for DB10 00100.7 38126 Pivo da Porta C Zinc. for DB10 04448.2 38045

30270 Washer L 3 8 ZB for DB10 00101.5 30292 PFS FCH UNC1 4x1.1 2 RTZB for DB10 04449.0 79037 Positive Terminal Lock for DB10 17581.1

30186 Wire Passer Molde 0922231 for DB10 00218.6 38127 Tubo de Saida (C.Martel.) for DB10 04458.0 30050 Terminal Cover for DB10 17582.0

66182 Pressure Rivet AD-440-S for DB10 00220.8 21579 Central Shaft Pin for DB10 04623.0 16440 On/Off Switch for DB10 17696.6

38120 Cabinet DB 10 for DB10 00228.3 30194 Reduction Bush for DB10 04626.4 16441 Reset Switch (Breaker) for DB10 17697.4

30354 Peeler Base for DB10 00230.5 27710 Glue Kit DB/DP-10/DC for DB10 04636.1 78572 Plug Sext.M32 Black for DB10 17698.2

38117 Base DB 10 for DB10 00231.3 14801 Central Shaft Pin for DB10 04894.1 30182 Cord 3x1mm2 2PC1PR Omcan for DB10 17699.0

62452 Central Shaft for DB10 00237.2 66187 Locking Plate Inf. for DB10 05045.8 78549 CS Housing for DB10 17744.0

78569 Ball Bearing 6204 Z for DB10 00238.0 16409 DB10 Lid (Acrylic) for DB10 08174.4 78553 Complete Housing for DB10 17745.8

38110 Motor Base DB 10 for DB10 00240.2 38116

38121 PFS SEX UNC3 8x1 RTZB for DB10 00241.0 16410 Complete Motor Support for DB10 08250.3 78548 Strip for DB10 17868.3

30312 Motor Pulley for DB10 00242.9 38129 PFS FCH UNC1 4x5 8 RTZB for DB10 08521.9 78556 PVC Gloove 1/2 NPT Grey EL for DB10 17891.8

66183 Moved Pulley for DB10 00243.7 38130 Door Base for DB10 08522.7 30305 Cable 3x1.0mm With Plug for DB10 17898.5

66184 Belt Z 625 for DB10 00244.5 30286 Washer 10x28x1.5mm for DB10 08563.4 38114 Door with Rubber for DB10 18531.0

Rubber Flange S027057EAL Mold 085286

16399

for DB10

30352 Pression Rivet AD 665 S for DB10 00251.8 24020 Nipple Set/Reduction for DB10 09240.1 66189 Complete Motor 0.5CV 60HZ W for DB10 19413.1

66185 Revest.Bor.1300x265x6mm for DB10 00258.5 38131 Term. Pre Isol.ET 4259(C) for DB10 09660.1 78564 Nut NPT 1/2x17mm for DB10 19624.0

16395 Lock Pin for DB10 00267.4 38132 Hatch Llatch Set with Revetment for DB10 10079.0 38111 Double Ring Adapter for DB10 20143.0

38123 Screw Nut 3 16 for DB10 00319.0 38133 Complete Cabinet for DB10 10708.5 78543 Lower Closing Strip for DB10 21495.7

30277 Switch 14223 A1B1E3G for DB10 00357.3 17512 Abrasive Disc for DB10 10711.5 65886 Motor 0.5CV 60Hz W for DB10 21952.5

38113 PFS SEX UNC1 4x1.1 4 RTZB for DB10 00409.0 66188 Complete Motor 0.5CV 60HZ W for DB10 10903.7 18949 Select Switch 110/220V Compl. for DB10 24375.2

38112 Screw 1 4x5 8 for DB10 00544.4 38044 Nut M3 DIN 934 Stainless Steel for DB10 12853.8 27720 Omcan Logo (Machines) for DB10 27154.3

38124 Complete Cabinet DB 10 for DB10 00692.0 38134 Door for DB10 14313.8 30059 Omcan Packaging Logo for DB10 27155.1

27692 Insult Term EF-4228 for DB10 01213.0 38135 Fastener for DB10 14315.4 66190 Complete Motor 0.5CV 60HZ for DB10 29065.3

30215

Switch HH-201 SF1G3FS1Q for DB10 01307.2 30200 Distanciador for DB10 14332.4 27726 Cord Holder PG13.5 LC+P/9 for DB10 31923.6

16401 Retainer Seal 00784BR1(F.0122) for DB10 01741.8 38136 Screw 3 16x5 16 for DB10 14333.2 44896 Acrylic Lid for DB10 36534.3

30249 On / Off Label for DB10 01844.9 30347 Sextavated Screw UNC1 4x1 RTIN for DB10 14334.0 27762 Oxido de Aluminio No.46 for DB10 36969.1

30350 Nylon Cover CN-4472 for DB10 02031.1 30311 Nut Sex. 1 4 Stainless Steel for DB10 14335.9 38106 Abrasive Disc Small for DB10 37737.6

27693 Washer L.A8.4 ZB for DB10 02730.8 38115 Borracha de Vedacao for DB10 14337.5 30375 Arr.L.A21 DIN 125 Inox for DB10 40587.6

38125 PFS FCH UNC1 4x1 2 RTZB for DB10 03210.7 38137 Washer L 3 16 for DB10 14352.9 78551 Cleaning Maintenance Label for DB10 50665.6

00247.0 65887 Cord 3x1mm2C/PGRE 2PC1PR for DB10 09102.2 38341

Item

Description Position

No.

Complete Base for DB10 08249.0 78561 Screw M3x30 for DB10 17814.4

Item

Description Position

No.

Washer L.A3.2 DIN 125 Stainless Steel for DB10

Washer 1/4x5/8x1.2mm Stainless Steel for DB10

17181.6

19384.4

10

Model PE-BR-0010 13443

Electrical Schematics

11

Notes

________________________________________________________________________________________

12

Notes

________________________________________________________________________________________

13

Notes

________________________________________________________________________________________

14

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

www.omcan.com/warrantyregistration.html

For mailing in Canada

Pour postale au Canada

Por correo en Canadá

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

For mailing in the US

Pour diffusion aux États-Unis

Por correo en los EE.UU.

OMCAN

Niagara Falls, New York

USA, 14305

or email to: service@omcan.com



Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

15

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 3,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 3,500 productos con origen a nivel mundial.

Omcan PE-BR-0010 Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual