Omcan CF-CN-0520, CF-CN-0720, CF-CN-0520-T Service Manual

Candy Floss Machines

Models CF-CN-0520-T, 0520, 0720

Items 40383, 41336, 41337

Instruction Manual

Revised - 09/01/2017

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

Table of Contents

Model CF-CN-0520-T / Model CF-CN-0520 / Model CF-CN-0720

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Parts Breakdown

-------------------------------------------------------------------------------------------- 6

----------------------------------------------------------------------------------------- 6 - 7

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 5

----------------------------------------------------------------------------- 7 - 10

Page

-------------------------------------------------------------------------- 6

Electrical Schematics

Notes

Warranty Registration

------------------------------------------------------------------------------------------- 12 - 14

---------------------------------------------------------------------------- 11

--------------------------------------------------------------------------- 15

2

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

3

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

• Children are forbidden to use this machine.

• Unit must be grounded. Keep the cable away from the heat.

• Don’t immerse the cable, electrical plug or the machine into water or other liquids.

• Don’t use if the cable, electrical outlet or plug is broken.

• Install the heating head and pan correctly, then plug in the unit. Turn off the power switch when not being

used, remove the pan and clean it with water.

• Don’t touch the surface or the heating head during operation, don’t put your hand into the pan during

4

Safety and Warranty

operation, a burn hazard will occur.

• Do not move the machine when operating.

• Do not touch with plug, electric cable with wet hands, a shock hazard will occur.

• Avoid the long periods of continuous operation in order to prolong the life of the motor. Allow the machine to

rest for 20 minutes after 1 hour of continuous operation.

• Before any maintenance, close the power and remove the plug from the main connection rst.

• Do not use this machine while it is empty.

• Do not use detergent with this machine, use a soft damp cloth to wipe the machine.

• Do not wash under running water.

• If the heating head doesn’t run, turn off the machine immediately and remove from the main connection,

clean the burnt sugar with a soft cloth.

CAUTION: Risk of re and electric shock. Replace only with manufacture’s cord set.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see www.omcan.com/warranty.html for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

5

Technical Specications

Model CF-CN-0520-T CF-CN-0520 CF-CN-0720 Bowl Size (Dia. x H) 20.5” x 6” / 520 x 152mm 28.3” x 6” / 720 x 152mm Power 1.03kw

Electrical 110V / 60Hz / 1

Dimensions

Weight 46.3 lbs. / 21 kgs. 26.4 lbs. / 12 kgs. 28.6 lbs. / 13 kgs.

Packaging Weight 50.7 lbs. / 23 kgs. 28.6 lbs. / 13 kgs. 30.8 lbs. / 14 kgs.

Item Number 40383 41336 41337

37” x 20.5” x 49”

940 x 520 x 1245mm

20.5” x 20.5” x 19.7”

520 x 520 x 500mm

28.3” x 28.3” x 19.7” 720 x 720 x 500mm

Installation

• After taking the machine out of the packing carton, t the parts to the right places.

• The user should clean the heating head and the stainless steel pan before use, dry everything completely

before connecting to the power.

• This machine should be placed on a level and stable work surface, keeping the machine away from the ground.

• Before turning on the machine, the user should check whether the electric voltage is same as indicated on the rating plate, also ensuring that the connection is properly grounded.

Operation

• Turn on the power switch to let the machine run for 1-2 minutes, check whether the machine runs smoothly. (It need to be adjusted if the machine shakes vigorously, the user must make sure the machine is steady and the head runs correctly).

• Turn on the unit to the highest setting, then let the machine warm-up for about 4-5 minutes.

• Put one spoon of clean granulated sugar into the center of the running head.

• The candy oss will begin to form after 30 seconds, then use a bamboo stick or other related object to gather the candy oss, turning and following the inside of the pan. (make sure the stick being used is clean before gathering the candy oss).

• Once all candy oss has been gathered, turn off and unplug the machine for cleaning. Do not use

detergents, instead use a soft damp cloth to clean the machine. Ensure that the machine is fully dry before plugging back in.

• To make more candy oss, simply repeat the above steps.

6

Operation

REFERENCE

Item Number Model Number Description Manufacturer Model Number

40383 CF-CN-0520-T

41336 CF-CN-0520

41337 CF-CN-0720

Candy Floss Machine with Cart

520mm Bowl 110V/60HZ ETL

Candy Floss Machine

520mm Bowl 110V/60HZ cETLus

Candy Floss Machine

720mm Bowl 110V/60HZ cETLus

ETMF05-520

ETMF01-520

ETMF01-720

Parts Breakdown

Model CF-CN-0520-T 40383

Item No. Description Position Item No. Description Position Item No. Description Position

76498 Heating Head for ET-MF05-520 1 76505 Sticker for ET-MF05-520 8 76512 Guide Rail for ET-MF05-520 15

76499 Pan for ET-MF05-520 2 76506

76500 Layer Board for PAN for ET-MF05-520 3 76507 Feet Square Tube for ET-MF05-520 10 76514 Push Rod for ET-MF05-520 17

76501 Belt for ET-MF05-520 4 76508 Wheel for ET-MF05-520 11 76515 Protection Assemble for ET-MF05-520 18

76502 Bracing Plate for ET-MF05-520 5 76509 Rack for ET-MF05-520 12 76516 Bearing for Push Rod for ET-MF05-520 19

76503 Sugar Spoon for ET-MF05-520 6 76510 Hook for ET-MF05-520 13 76517 Motor for ET-MF05-520 20

76504 Drawer for ET-MF05-520 7 76511 Bracing Plate for ET-MF05-520 14 76518 Axis Assemble for ET-MF05-520 21

Switch Fuse Voltage Meter for ETMF05-520

9 76513

Layer Board for Voltage Meter for ET-MF05-520

16

7

Parts Breakdown

Model CF-CN-0520 41336

Item No. Description Position Item No. Description Position Item No. Description Position

76499 Pot for ETMF05-520 1 76498 Heater for ETMF05-520 11 63662

63658 Foot for ETMF05-520 2 76501 Belt for ETMF05-520 12 63663 Cable Tie for ETMF05-520

76500 Top Cover for ETMF05-520 3 76518 Complete Metal Support for ETMF05-520 13 63664 Quick Connect Terminal for ETMF05-520

76515 Protective Cover for ETMF05-520 4 76517 Motor for ETMF05-520 14 63665 Inlet for ETMF05-520

76509 Enclosure for ETMF05-520 5 63671 Motor Capacitor for ETMF05-520 15 63666 Fuse for ETMF05-520

76504 Drawer for ETMF05-520 6 63656 Power Supply Cord for ETMF05-520 63667 Interlock Switch for ETMF05-520

76506 Voltage Meter for ETMF05-520 7 63657 Connector for ETMF05-520 63668

76506 Fuse Holder for ETMF05-520 8 63659 PVC Tube for ETMF05-520 63669 Thermo-Limit (230C) for ETMF05-520

76506 Switch for ETMF05-520 9 63660 Heating Shrinkable Tube for ETMF05-520 63670 Thermo-Limit (245C) for ETMF05-520

76510 Clamp (0.6mm Thick) for ETMF05-520 10 63661

Internal Wire (600V 18AWG) for ETMF05-520

63672 Marking Label for ETMF05-520

Model CF-CN-0720 41337

Internal Wire (300V 16AWG) for ETMF05-520

Silicone Coated Fiberglass Sleeve for ETMF05-520

Item No. Description Position Item No. Description Position Item No. Description Position

63476 Pot for ETMF01-720 1 76498 Heater for ETMF01-720 11 63662

63658 Foot for ETMF01-720 2 76501 Belt for ETMF01-720 12 63663 Cable Tie for ETMF01-720

76500 Top Cover for ETMF01-720 3 76518 Complete Metal Support for ETMF01-720 13 63664 Quick Connect Terminal for ETMF01-720

76515 Protective Cover for ETMF01-720 4 76517 Motor for ETMF01-720 14 63665 Inlet for ETMF01-720

76509 Enclosure for ETMF01-720 5 63671 Motor Capacitor for ETMF01-720 15 63666 Fuse for ETMF01-720

76504 Drawer for ETMF01-720 6 63656 Power Supply Cord for ETMF01-720 63667 Interlock Switch for ETMF01-720

76506 Voltage Meter for ETMF01-720 7 63657 Connector for ETMF01-720 63668

76506 Fuse Holder for ETMF01-720 8 63659 PVC Tube for ETMF01-720 63669 Thermo-Limit (230C) for ETMF01-720

76506 Switch for ETMF01-720 9 63660 Heating Shrinkable Tube for ETMF01-720 63670 Thermo-Limit (245C) for ETMF01-720

76510 Clamp (0.6mm Thick) for ETMF01-720 10 63661

Internal Wire (600V 18AWG) for ETMF01-720

63672 Marking Label for ETMF01-720

Internal Wire (300V 16AWG) for ETMF01-720

Silicone Coated Fiberglass Sleeve for ETMF01-720

8

Model CF-CN-0520-T 40383

Parts Breakdown

9

Parts Breakdown

Model CF-CN-0520 41336 Model CF-CN-0720 41337

1

12

2

3

11

13

14

4

15

6

10

7

8

9

10

5

Model CF-CN-0520-T 40383 Model CF-CN-0520 41336 Model CF-CN-0720 41337

Electrical Schematics

Position Description Position Description

FR1 Thermostat M Motor FU Fuse R Heating Pipe K1 Motor Switch V Voltmeter K2 Heat Pipe Switch XS Socket

11

Notes

________________________________________________________________________________________

12

Notes

________________________________________________________________________________________

13

Notes

________________________________________________________________________________________

14

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

www.omcan.com/warrantyregistration.html

For mailing in Canada

Pour postale au Canada

Por correo en Canadá

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

For mailing in the US

Pour diffusion aux États-Unis

Por correo en los EE.UU.

OMCAN

Niagara Falls, New York

USA, 14305

or email to: service@omcan.com



Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

15

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 3, 500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 3, 500 productos con origen a nivel mundial.

Omcan CF-CN-0520, CF-CN-0720, CF-CN-0520-T Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual