Omcan 39477 Instruction Manual

Download

Page 1

Gear-Driven Slicer

Model MS-IT-0330-N

Item 39477

Instruction Manual

Revised - 06/26/2017

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

Page 2

Table of Contents

Model MS-IT-0330-N

Section

General Information

Safety and Warranty

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 5

Technical Specications

Installation

Operation

Maintenance

--------------------------------------------------------------------------------------- 6 - 7

----------------------------------------------------------------------------------------- 7 - 8

----------------------------------------------------------------------------------- 8 - 11

Page

-------------------------------------------------------------------------- 6

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

------------------------------------------------------------------------------------------------- 26

Warranty Registration

----------------------------------------------------------------------------- 11 - 12

---------------------------------------------------------------------------- 12 - 24

---------------------------------------------------------------------------- 25

--------------------------------------------------------------------------- 27

Page 3

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

--------------------------------------------------------------------------------------------------------------------------------------------------Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

Page 4

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

--------------------------------------------------------------------------------------------------------------------------------------------------Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre leer y familiarizarse con todas las instrucciones de operación y seguridad.

Omcan quisiera darles las gracias por la compra de esta máquina. Es de la máxima importancia para guardar estas instrucciones para referencias en el futuro. También guarde la caja original y el embalaje

para envío del equipo si el mantenimiento o la devolución de la máquina es necesaria.

Safety and Warranty

MECHANICAL SAFETY DEVICES

The slicer is manufactured according to the EEC 2006/42 Machinery Directive.

The mechanical safety devices are the following:

• Product holder removable only with the slice thickness control on zero (slice thickness plate positioned to protect the blade). After removing the product holder the slice thickness plate is mechanically clamped.

Page 5

Safety and Warranty

• Protection devices mounted on the product holder to prevent the operator from any accidental contact with the blade.

• Blade guard. This xed ring protects that part of the blade which is not used for the cutting operation.

• A special mechanical safety device to sharpen the blade keeping the ngers of the operator away from the

cutting edge of the blade.

ELECTRICAL SAFETY DEVICES

The electrical safety devices in accordance with the EN 60204 standards are the following:

• Start and stop push buttons.

• Control circuit provided with electric servo-control; in any case of blade clamping the machine must be

restarted manually.

• Safety device to stop the rotation of the blade if the clamping handle of the blade guard is released.

WARNING

When the machine is not used:

• Make sure that it is off.

• Re-position the slice thickness control to zero.

Do not remove the labels placed on the machine and replace them if damaged.

1 YEAR PARTS AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see www.omcan.com/warranty.html for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Page 6

Technical Specications

Model MS-IT-0330-N Blade Size 13” / 330mm Power 0.6 HP / 0.45 kW

Cheese Slicing Slicing Volume* 8 hours or more Slicing Capacity 10.2” x 6.7” / 259 x 170mm | 9.25” / 235mm(Dia.)

Cut Thickness 0 - 0.55” / 0 - 14mm

RPM 240 Voltage 120V / 60Hz / 1

Packaging Weight 163 lbs. / 74 kgs. Packaging Dimensions 36.2” x 33.8” x 32.7” / 920 x 859 x 831mm

Item Number 39477

*Results may vary due to product consistency and temperature

Installation

The slicer must be mounted horizontally on a stable, robust and antiskid base adequate to support its weight.

The suggested height of the working table is of about 800 mm. It must be checked that the product holder is not clamped and the product to be cut can be easily loaded.

WARNING: To prevent the risk of crushing hazard, locate the machine in a manner that allows a clear space between the moving table and any permanent structure.

PRELIMINARY CLEANING

Before connecting the plug clean off the protective oil from the machine.

WARNING

The working table must always be cleaned.

ELECTRICAL SUPPLY

The machine must be installed in the proximity of a mains socket. Check that the power supply voltage

corresponds to that described on the information label and that it is connected to an adequate earth.

1. Connect the plug.

2. Check that the blade cover fastener handle is tight screwed.

3. Check that the blade sharpener is lowered and the protective cover is closed.

MANUAL FUNCTIONING

1. Press push button blade start.

2. See manual functioning.

Page 7

Installation

3. Press pushbutton carriage start.

SLICER FUNCTIONING AND USE

The following products can be sliced: sausages, ham, cheese, bread. If large quantities of bread or cheese are usually cut it is advisable to mount a teon coating.

WARNING

The following cannot be sliced:

• Not-eatable products.

• Foodstuffs with bones.

• Frozen products.

AUTOMATIC FUNCTIONING

Rotate the carriage release handle in a counterclockwise direction by 180°. With the automatic functioning it is possible to change the cut stroke length to adapt it to the dimensions of the product to be cut. Rotate the product holder stroke adjustment knob respectively in a clockwise or counterclockwise direction to lengthen or shorten the product holder stroke. Irrespective of the selected stroke, the product holder always stops in product load position (operator’s side) by pressing the product holder stop push button. The machine is supplied with two self-contained motors: one for the blade and another for the product holder to better adjust its stroke. By separating the two functions a more precise cut can be obtained.

MANUAL FUNCTIONING

Rotate the product holder release handle in a clockwise direction by 180°.

Operation

HOW TO LOAD THE PRODUCT TO BE CUT

1. Check that the slicer is off and position the slice thickness control to zero.

2. Push the product holder towards the operator.

3. Lift and rotate the product pusher: the pusher can fall back, this is normal.

4. Place the product to be cut against the wall of the product holder and the slice thickness plate.

5. Position the product pusher on the product to be cut far from the slice thickness plate. The product is fed to the slice thickness plate by gravity making the cut easier.

6. Rotate the slice thickness control to the thickness desired.

AUTOMATIC FUNCTIONING

1. Rotate the carriage release handle in a counterclockwise direction by 180°.

2. Press push button start blade.

3. Press push button start the product holder.

4. To select the most suitable carriage stroke according to the dimensions of the product to be cut, rotate the

Page 8

Operation

carriage stroke adjustment knob respectively in a clockwise or counterclockwise direction to lengthen or shorten the stroke.

DANGER

Do not touch the carriage or the product holder when the machine is working.

After completing the cutting operation, press push button stop the product holder. The blade remains in operation whereas the product holder is fed to the stroke end where it stops towards the operator ready to start a new cutting cycle.

By pressing push button stop the blade, the product holder stops in its working position.

MANUAL FUNCTIONING

1. Rotate the carriage release handle in a clockwise direction by 180°.

2. Press push button to start the blade.

3. With constant speed, according to the product to be sliced features, you can push the product holder tray to its end stroke in blade direction. You can then return in the operator position and repeat this operation.

After cutting the product, reposition the product holder towards the operator. By pressing push button stop blade the rotation of the blade stops. Re-position the slice thickness control to zero and unload the product.

Maintenance

BLADE SHARPENING

Whenever the cut is not satisfactory, sharpen the blade. The time interval between a sharpening and the following depends on the intensity of use of the slicer and on the kind of food you cut. Replace the blade when the diameter becomes 10 mm less than the nominal diameter. For the replacement, ask the assistant service closest to you.

WARNING The replacement of the blade is dangerous operation. Should the sharpening quality be not satisfactory, replace the stones by contacting Omcan.

SHARPENING OPERATION

DANGER The sharpening operation must be performed during the manual functioning.

For a correct sharpening of the blade follow these instructions:

1. Clean the blade removing any greasy residue.

Page 9

Maintenance

2. Make sure that the machine is off.

3. Rotate the slice thickness control to zero to make sure that the blade is covered by the slice thickness plate.

IMPORTANT

During the following operations the blade must always be covered by the removable protection.

4. Lift the sharpener cover.

5. Slip off completely the sharpener and spin it 180 degrees.

6. Replace the sharpener device.

7. Push the push button blade start to start the machine.

8. Sharpening: Press the sharpening wheel for about 10-15 seconds. Then press simultaneously also the grinding stone for two seconds. Contemporaneously loosen the two grind stones. The sharpening and honing take place then simultaneously.

ATTENTION: for a suitable effect please execute sharpening for 10-15“ approx.

9. After sharpening press the blade stop push button.

10. Lift and rotate 180 degrees the sharpener and reallocate it into its initial position. Loosen the handle rotating it clockwise to block the sharpener. Lower the sharpener cover.

SHARPENER DEVICE REMOVAL

To facilitate the cleaning of the sharpening grinder, remove the sharpener device pulling it upwards.

WARNING

Do not immerse in water or detergent the sharpening device.

CLEANING OF THE GRINDING WHEELS

To obtain an excellent sharpening the grinding wheel must always be clean. Remove dirt and grease with rubbing alcohol and the supplied special brush. Be sure to clean and sanitize the blade after sharpening.

MAINTENANCE

All cleaning and maintenance operations must only be carried out with the machine disconnected and isolated from the mains supply and the slice thickness control on zero.

CONTROL OF THE AIR GRATING

An air grating for the motors ventilation is placed in the lower side of the machine. Keep the section-holes free and clean them with a brush at regular intervals.

Page 10

Maintenance

CHECK OF THE ELECTRIC CABLE

It is recommended to check the wear of the electric cable at regular intervals.

SPARE PARTS

In the event that replacement parts need to be tted, request only original spare parts.

CLEANING

The machine must be cleaned once a day or more frequently if necessary. Clean all the parts using a cloth sprinkled with water and washing up liquid (do not use strong detergents) and a brush.

WARNING

Do not use water jet

DANGER

During the cleaning operations take great care: danger of accident.

COMPONENTS REMOVAL

PRODUCT HOLDER

1. Loose the product holder by rotating the product holder clamping handle in a counterclockwise direction.

2. Position to zero the slice thickness control to remove the product holder.

3. Push the product holder towards the operator until it clicks. The click will inform the operator that the product holder is clamped.

4. Lift the last slice device from the guide bar.

5. Lift the product holder from the carriage.

IMPORTANT

The slice thickness control is clamped on zero.

BLADE COVER

1. Rotate the slice deector and keep it away from the blade.

2. Loose the blade cover fastener handle by rotating it in a counterclockwise direction.

3. Push on the handle in the direction indicated by the arrow to lift the blade cover from the blade.

4. Lift the blade cover.

ATTENTION

Once removed the blade cover, an interlocking device stops the rotation of the blade.

DANGER

During the cleaning operations of the blade, pay attention to an accidental contact with it.

5. Press a damp cloth on the front side of the blade and move slowly from the center towards the edge in the

Page 11

Maintenance

direction of the arrow.

6. Follow these instructions to clean the back side of the blade.

7. With a cloth dry both sides of the blade following this procedure.

8. Insert a damp cloth between the blade and the protection ring. Pull it outwards and rotate it to clean the internal side of the protection ring.

9. After cleaning re-position the blade cover, insert the fastener and screw in a clockwise direction to clamp the blade cover. Lower the sharpener protective cover.

IMPORTANT

Leave all the parts to soak in warm water and washing-up liquid (do not use strong detergents) and clean them

by using a brush or a cloth. Rinse them in warm water and dry them.

To assemble the machine follow the reverse procedure as described for disassembly.

GUIDES LUBRICATION

This operation must be performed after cleaning the slicer or whenever the sliding is difcult. Use food safe oil

only.

LUBRICATION OF THE GUIDE BAR OF THE LAST SLICE DEVICE

1. Drop some food grade oil on the bar.

2. Let the last slice device slide on the guide bar.

LUBRICATION OF THE GUIDE BAR OF THE PRODUCT HOLDER CARRIAGE

1. Push the product holder towards the operator.

2. Pour the food grade oil into the special carriage bar lubricator.

3. Push the product holder to and from and repeat the operation. Re-position it towards the operator.

Troubleshooting

PROBLEM CORRECTIVE ACTION

The machine vibrates, overheats and emits a foul smell.

The blade cannot be sharpened any longer. The sharpening is no regular.

On pushing the start push button the machine does not start.

The carriage and the last slice

device run with difculty.

Stop it immediately and check that the voltage corresponds to that described on the rating label.

Clean the grinding wheels of the sharpener and check the wear of the blade.

Check if power missing. Check the safety devices.

Lubricate the guide bars.

Page 12

Troubleshooting

REFERENCE

Item Number Model Number Description Manufacturer Model Number

Meat Slicer Gear Driven Automatic 13” /

39477 MS-IT-0330-N

330mm Blade 0.6 HP / 450W 120V/60/1

NSF cETLus

CXMATIC33

Parts Breakdown

Model MS-IT-0330-N 39477

Page 13

Model MS-IT-0330-N 39477

Parts Breakdown

Page 14

Parts Breakdown

Model MS-IT-0330-N 39477

Page 15

Model MS-IT-0330-N 39477

Parts Breakdown

Page 16

Parts Breakdown

Model MS-IT-0330-N 39477

Page 17

Model MS-IT-0330-N 39477

Parts Breakdown

Page 18

Parts Breakdown

Model MS-IT-0330-N 39477

Page 19

Model MS-IT-0330-N 39477

Parts Breakdown

Page 20

Parts Breakdown

Model MS-IT-0330-N 39477

Page 21

Parts Breakdown

Model MS-IT-0330-N 39477

Item No. Description Position Item No. Description Position Item No. Description Position

36535 Assembly Sharpener for CXMATIC33 A1036 36563 Carriage Bushing for CXMATIC33 B6213 36629

36536

16902 Ring EL.Benzing 8 for CXMATIC33 A5406 36566

17281 Ring EL.Seeger EXT.25 for CXMATIC33 A5453 36569 Fixing Lever Bushing for CXMATIC33 B6239 36630 Bearing 5x16x6.5 for CXMATIC33 C8035

77585

36541 Ring EL.Seeger INT.35 for CXMATIC33 A5470 36572 Locking Bushing for CXMATIC33 B6255 16926

77586 Ring EL.Seeger INT.52 for CXMATIC33 A5485 36574 Bushing for CXMATIC33 B6333 36591 Carriage Support for CXMATIC33 C185404

19612 Ring 33 for CXMATIC33 A5495 36575 Bushing for CXMATIC33 B6334 19637 Nut M3 for CXMATIC33 D0101

17283 Oil Seal 25x52x10 for CXMATIC33 A5809 36576 Bushing DU 28x32x25 for CXMATIC33 B6335 78293 Nut U5589 M8 for CXMATIC33 D0135

17285 Oil Seal 60x75x8 for CXMATIC33 A5815 36584 All Sharpener Cover for CXMATIC33 C1637 36637

19493 Oil Seal 25x47x07 for CXMATIC33 A5816 36593 Assembled Carriage for CXMATIC33 C1903 36640

17288 O-Ring 3081 20.24x2.62 for CXMATIC33 A5854 62343

77604 O-Ring 2056 14x1,78 for CXMATIC33 A5862 62344

36544 Carriage Rod for CXMATIC33 B1010A 62345

36549

19499 Carriage Rod for CXMATIC33 B1284 17316 Pin 8.5mm for CXMATIC33 C4601 19644 Nut M6 for CXMATIC33 D0163

19501 Meat Grip Rod A310 & C for CXMATIC33 B1337A 17317 Pin .11 for CXMATIC33 C4602 36647 Nut U5588 M8 for CXMATIC33 D0165

78292 Body Housing for CXMATIC33 B1871 36601 Rivet 1.9x5 for CXMATIC33 C4640 36648 Nut U5588 M8 for CXMATIC33 D0165X

36555 Belt Bracket for CXMATIC33 B5032 36604 Belt D.420 L100 for CXMATIC33 C4817 19645 Nut M10 for CXMATIC33 D0167

19510 Hangover Bracket for CXMATIC33 B5033 36605 Belt V.360x10 for CXMATIC33 C4824 36653 Spacer for CXMATIC33 D5413

62341 Block Pivot Cerniera for CXMATIC33 B5096 36607

62342 Belt Bracket Assembly for CXMATIC33 B5195 62347 Capacitor 35MF 450V UL for CXMATIC33 C5833 36656 Motor Spacer for CXMATIC33 D5640

17298 Bushing Fastener C for CXMATIC33 B6006 78266 Motor for CXMATIC33 C6463 36658 El.Box Spacer for CXMATIC33 D5715

19618 Bushing 8x10x8 for CXMATIC33 B6009 36615 Back Motor Cover for CXMATIC33 C6466 36661

36557 Bushing DU 25x28x30 for CXMATIC33 B6021 36616

16904 Bushing Sharpener for CXMATIC33 B6048 36617 Motor Fan Cover for CXMATIC33 C6573 36671 Unhook Spring Spacer for CXMATIC33 D5806

16905 Bushing DU 16x18x15 for CXMATIC33 B6053 36618 Motor Cover for CXMATIC33 C6577 77505

17304 Bushing for CXMATIC33 B6056 36623 Foot Cover for CXMATIC33 C6682 36644

19630 Bushing Fastener for CXMATIC33 B6104B 78291 Body Rear Cover for CXMATIC33 C6779 36659 Hand Grip-Knob Spacer for CXMATIC33 D575081

78265 Bushing Funnel for CXMATIC33 B6110 36624 Carrriage Side Cover for CXMATIC33 C6781 36665 Locknut Spacer for CXMATIC33 D577018

18648 Bushing for CXMATIC33 B6212 36628 Switch Cover 16x20 for CXMATIC33 C7113 36675 Cam Carriage for CXMATIC33 E1409A

Ring EL.Benzing 6 Stainless Steel for CXMATIC33

Ring EL.Seeger EST.25 SER.Heavy for CXMATIC33

Shock Absorber Rod 12x185 for CXMATIC33

A5404X 36564

A5454 36570 Bushing DU 16x18x20 for CXMATIC33 B6246 36631

B1252 62346 Bracket for CXMATIC33 C3654 36643 Nut U5588 M5 for CXMATIC33 D0160

Bushing for Carriage Support lg.23mm for CXMATIC33

Bushing to Hold Carriage Springs for CXMATIC33

Cavo Ass. Motor Lama (120/60) for CXMATIC33

Cavo Ass. Motor Carriage(120/60) for CXMATIC33

Cavo Ass. Alim.Scheda(120/60) for CXMATIC33

Blade Cover Bolt Keeper 14x14 for CXMATIC33

Transparent Cover for Carriage Plate for CXMATIC33

B6214 17334

B6221 16925

C3263 19642 Nut M8 for CXMATIC33 D0155X

C3264 36642 Locking Nut for CXMATIC33 D0156

C3265 19643 Nut M10 for CXMATIC33 D0157X

C5007 36654

C6538 36670

Bearing 2Z-6003 17x35x10 for CXMATIC33

Bearing 2Z-6205 25x52x15 for CXMATIC33

Bearing 2RS-6204 20x47x14 for CXMATIC33

Bearing 2RS-6205 25x52x15 for CXMATIC33

Bearing 2RS-6000 (10x26x8) for CXMATIC33

Nut U5589 M8 Stainless Steel for CXMATIC33

Domed Nut U5721 M6 Stainless Steel for CXMATIC33

Spacer per Registro M10 p.1x33 for CXMATIC33

Carriage Shock Absorber Spacer for CXMATIC33

Sharpener Support Spacer for CXMATIC33

Stainless Steel Nut U5588 M12 for CXMATIC33

U5588 M5 Stainless Steel Nut for CXMATIC33

C8006

C8011

C8024

C8056

C8067

D0135X

D0153X

D5457

D5762

D5777

D014215

D016015

Page 22

Parts Breakdown

Model MS-IT-0330-N 39477

Item No. Description Position Item No. Description Position Item No. Description Position

17345 Cam Bearing for CXMATIC33 E1458 36744

36680 Carriage Felt for CXMATIC33 F1606 19776 Spring 14x1.5x60 for CXMATIC33 M7032 36793 Pin Handle for CXMATIC33 P3430

62348

36682

17348 Flange Knife C for CXMATIC33 F6034 36746 Spring 7x0.8x23 Cam for CXMATIC33 M7076 77594

77591 Support Blade Flange for CXMATIC33 F6039 19248 Spring 15.6x20x2.2 for CXMATIC33 M7120 19831 Gauge Plate Flat Bar VS for CXMATIC33 P4621

17351 Locknut for CXMATIC33 G5018 36749

36689

36691 Ring for Bushing for CXMATIC33 G5053 78283 Screw for CXMATIC33 M7132 17438 Foot for CXMATIC33 P5030

36692 Ring for Cam for CXMATIC33 G5054 36751 Spring for CXMATIC33 M7166 78235 End Grip for CXMATIC33 P6729

36695 Ring Support Cap for CXMATIC33 G5055 36754 Terminal Block AL17/1W for CXMATIC33 M8051 36850 Assembly End-Grip for CXMATIC33 P7019

36697 Logging Lock Nut for CXMATIC33 G5064 62353

36698 Index Ring M10 p.1 h.17 for CXMATIC33 G5084 20263 Motor 120V/60Hz-1 for CXMATIC33 M8246 36855

62349 Assembly Switch Pad for CXMATIC33 I1683 62354 Motor 120x60 Carriage for CXMATIC33 M8260 36857

17354 Handle T210 for CXMATIC33 I1910 36759

17356 Fastener Handle for CXMATIC33 I1926 17390

17363 End Grip Handle for CXMATIC33 I2040 36760 Pin Tray Shock-Absorber for CXMATIC33 P1025 17448 Sharpener Pusher for CXMATIC33 P8601

36714 Blade Cover Handling for CXMATIC33 I2058 17392 PL.Shock Absorb.8.5x20 for CXMATIC33 P1034 78282 Lock Washer for CXMATIC33 P8620

36717 Knob Assembly for CXMATIC33 I2098 19797 Nylon Shock 8.5x8 for CXMATIC33 P1042 78284 Bracket for CXMATIC33 P8626

23632 Screw for CXMATIC33 I2103 36762 Rubber Plug for CXMATIC33 P1053 36761 Shock Absorber for CXMATIC33 P103401

16936

62350 Bushing Glide Dia 8x8 for CXMATIC33 I3065 17395 Shock Absorber for CXMATIC33 P1081 36873 Resistor 50W 22 OHM for CXMATIC33 R4002

62351

17368 Hall Effect Switch 2P for CXMATIC33 I3646 36774 Strain Relief for CXMATIC33 P2001 19657 Washer 4 for CXMATIC33 R6003

17369 Switch 4x20 for CXMATIC33 I3647 17415 Strain Relief for CXMATIC33 P2008 36877 Washer 8.2x16x0.9 for CXMATIC33 R6207

62352

37808 Handle Carriage for CXMATIC33 I203576 36778 Wire-Press for CXMATIC33 P2014 19666 Washer for CXMATIC33 R6280

36732 Magnet 6x20 for CXMATIC33 M0802 36779 Core-Hitch+Nut for CXMATIC33 P2015 17456 Washer U6592 5 for CXMATIC33 R6508

36735 Magnet 10x12x48 for CXMATIC33 M0810 36780 Wire Pusher for CXMATIC33 P2017 36882

36737 Grinding Stone C for CXMATIC33 M6602 36786 Front Pulley Pin for CXMATIC33 P3302A 36883

36739 Honing-Finishing Stone for CXMATIC33 M6621 36787 Pin Rear Pulley for CXMATIC33 P3303A 36884

36743

Feltro Carrello Bop Bianco (87x70x2) for CXMATIC33

Unhook Friction Clasp 12x22x8 for CXMATIC33

Stainless Steel Locknut M8 for CXMATIC33

Bronze Gear 328 DP56.44 Z29 M1.75 for CXMATIC33

Bushing Glide Pin Dia 8x38 for CXMATIC33

Thermal Protector F11-120C for CXMATIC33

Spring 9.9x0.7x7 Stainless Steel for CXMATIC33

F1615 19782 Spring 19.5x1.5x16.7 for CXMATIC33 M7050 36794

F3015 19250 Spring 24.8x1.8x15 for CXMATIC33 M7071 36805 Pivot for Grinding Stone for CXMATIC33 P3657

G5027 36750

I2403 16955 Shock Absorber for CXMATIC33 P1059 17419 Pin Truing for CXMATIC33 P322601

I3082 36773 Ring Guard for CXMATIC33 P1666 19656 Potentiometer for CXMATIC33 R4031

I3780 77617 Strain Relief for CXMATIC33 P2009 78258 Washer 30.5x46.5x0.6 for CXMATIC33 R6251

M7016 78264 Shaft for CXMATIC33 P3323 36885

Spring 10.5x1x19 Stainless Steel for CXMATIC33

Carriage Bar Spring 25-28-1.5 for CXMATIC33

18.5x20.9x1.2 Bar Carriage Spring for CXMATIC33

Terminal Block 3P AL18-10 for CXMATIC33

Rubber Shock Absorber 12x19x2 for CXMATIC33

Rubber Shock Abs. 16x22x2.5 for CXMATIC33

M7023 23649 Knife Shaft Model C for CXMATIC33 P3378

Carriage Plate Lock Pivot for CXMATIC33

Assembly Driving Pivot T8093 for CXMATIC33

M7121 36830 Flat Bar C for CXMATIC33 P4765

M7122 36834 Index Casting for CXMATIC33 P4860

M8054 36851 Stud Handle for CXMATIC33 P7404

PBC Insulating Protection for CXMATIC33

Protection Superior Lama for CXMATIC33

P1012 36858 Reduction Pulley for CXMATIC33 P8006

P1019 36859 Motor Pulley for CXMATIC33 P8008

Washer U6592 5 Stainless Steel for CXMATIC33

Washer U6592 6 Stainless Steel for CXMATIC33

Washer U6592 8 Stainless Steel for CXMATIC33

Washer U6592 10 Stainless Steel for CXMATIC33

P3440

P3697

P7925

P7969

R6508X

R6512X

R6520X

R6530X

Page 23

Parts Breakdown

Model MS-IT-0330-N 39477

Item No. Description Position Item No. Description Position Item No. Description Position

17458 Contact Washer for CXMATIC33 R6806 36960 Switch Bracket for CXMATIC33 S9113 19697 Screw M5x16 for CXMATIC33 V6211

36889 Washer 10.5x16x1 for CXMATIC33 R6816 36974 Carriage Plexi Support for CXMATIC33 S9238 19699 Screw M4x25 for CXMATIC33 V6231

17460 Washer 34.2x46x0.5 for CXMATIC33 R6846 78274 Control Panel Housing for CXMATIC33 S9265 19700 Screw M6x16 for CXMATIC33 V6240

77595 Washer 44,5x51,5x0,2 for CXMATIC33 R6848 78285 Fan Support for CXMATIC33 S9315 19702 Screw M6x25 for CXMATIC33 V6246

77540 Washer 6,2x14x0,6 for CXMATIC33 R6854 36976 Support for CXMATIC33 S9402 37039

19675 Washer C for CXMATIC33 R6863 36977 Sharpener Support for CXMATIC33 S9448 37042

36892 Washer 17x30x4 for CXMATIC33 R6874 36978 Support Bracket for CXMATIC33 S9451 19706 Screw for CXMATIC33 V6278

16972 Washer 5.5x19x2.5 for CXMATIC33 R6884 36901 Plastic Box-Housing for CXMATIC33 S101875 37048

36893

36897

78261

19680 Ball 3 17 for CXMATIC33 S3005 78273 Rubber Cap Diam. 16 for CXMATIC33 T1027 37064

17465 Ball 4.76 for CXMATIC33 S3015 78276 Switch Overlay for CXMATIC33 T1763 37066 Screw TE U5737 M6x15 for CXMATIC33 V6421

78281

36905 120V/60HZ P.C.B. for CXMATIC33 S3262 16983 Knife Shaft Assembly for CXMATIC33 T8027 37071

36908 Track C-CD for CXMATIC33 S3815 36997 Knife Shaft Assembly for CXMATIC33 T8092 37072

36915

19682 Pin 8x70 for CXMATIC33 S7523 19911 Fan for CXMATIC33 V4011 37075 Screw TE U5739 M8x60 for CXMATIC33 V6466

36920 Pin 4x25 for CXMATIC33 S7526 37013

36921

36922 Pin M.E.U6875 5x36 for CXMATIC33 S7539 37016

36923 Stainless Steel Pin 3x25 for CXMATIC33 S7540X 37018

36927 Pin M.I.S1 D1471 6x20 for CXMATIC33 S7568 37020 Screw M5x8 U5923 for CXMATIC33 V6028 17502 Screw M3x5.5 for CXMATIC33 V7901

36930 Pin M.E.U6873 3x22 for CXMATIC33 S7612 37023 Screw STEI U5929 M5x5 for CXMATIC33 V6065 17503 Screw M5x13 for CXMATIC33 V7908

36931 Pin 8x50 for CXMATIC33 S7669 19691 Grub Screw M6x6 for CXMATIC33 V6066 19717 Screw M6x50 for CXMATIC33 V7917

45093

19870 Stator 120/60 for CXMATIC33 S8562 37025 Screw STEI U5929 M6x8 for CXMATIC33 V6067X 19917 Screw BS for CXMATIC33 V7960

36945 Carriage Pulley Bracket for CXMATIC33 S8907 19695 Screw M10x30 for CXMATIC33 V6080 37100 Carriage Screw for CXMATIC33 V8017

36946 Bracket for CXMATIC33 S8910 37030 Screw M12x16 U5927 for CXMATIC33 V6081 16987 Special Screw M6x15 for CXMATIC33 V8020

78236 Bracket Washer C for CXMATIC33 S8951A 37031

36959 Bracket Magnet for CXMATIC33 S9112 37033 Screw TC U6107 M4x8 for CXMATIC33 V6206 19920 Screw M8x30 for CXMATIC33 V8036

Stainless Steel Special Washer 8.5x24x2 for CXMATIC33

Special Washer 5.5x22x1.5 for CXMATIC33

Rotor (A3109 P2521) Stator H.50 for CXMATIC33

Control Panel Housing Frame for CXMATIC33

Pin Stainless Steel D.6x28 for CXMATIC33

Stainless Steel 4x7 Pin M.C for CXMATIC33

Assembly Product Fence - OPT.81 for CXMATIC33

R6897X 19878 Rubber Cap for CXMATIC33 T1002 37050

R6932 36982

R8021 36983 Rubber Cap Diam. 13.5 for CXMATIC33 T1023 37053

S3234 44014

S7516 36999 Riding Pin (Diam.28) for CXMATIC33 T8538 37073

S7527 37014 STEI Screw 6x20 for CXMATIC33 V6001 78275 Screw TSPU6109 M3x6 for CXMATIC33 V7023

S7790 19692 Screw M6x8 for CXMATIC33 V6067 19720 Screw M6 for CXMATIC33 V7934

Heyco Cap SP-468 Diam.12 for CXMATIC33

Knife Cover Tie Rod (Release Knob) for CXMATIC33

Motor Fan MEC80 148x16 for CXMATIC33

Screw STTC U6113 M4x25 for CXMATIC33

Screw STTC U6113 M6x6 for CXMATIC33

Screw STEI U5929 M8x16 for CXMATIC33

T1022 37052

T5182 37067 Screw TE U5739 M5x20 for CXMATIC33 V6423

V4014 17497

V6008 17498

V6010 37086

V6083 37102 Screw M6x20 for CXMATIC33 V8035

Screw TCEI U5931 M6x25 INOX for CXMATIC33

Screw TCEI U5931 M8x25 for CXMATIC33

Screw TCTC AUT.D7981 3.5x9.5 for CXMATIC33

Screw TC AUT.D7971 4.2x9 for CXMATIC33

Screw TC AUT.U6951 4.2x16 for CXMATIC33

Screw AUT. U6954 3.9x25 for CXMATIC33

Screw TE U5739 M10x35 for CXMATIC33

Screw TE U5739 M6x10 Stainless Steel for CXMATIC33

Screw TE U5739 M8x20 Stainless Steel for CXMATIC33

Screw TE U5739 M8x25 Stainless Steel for CXMATIC33

Screw TSP U6109 M5x15 Stainless Steel for CXMATIC33

Screw TSPEI U5933 M4x10 for CXMATIC33

Stainless Steel Screw M 8x20 U5933 for CXMATIC33

V6246X

V6254

V6279

V6285

V6291

V6293

V6415X

V6450X

V6460X

V6461X

V7014X

V7043

V7070X

Page 24

Parts Breakdown

Model MS-IT-0330-N 39477

Item No. Description Position Item No. Description Position Item No. Description Position

37104 Threaded Stud for CXMATIC33 V8042 37114

37106

37107

37108

19726 Screw M5x21 for CXMATIC33 V8059 37044

37113

Stainless Steel Switch Screw M5x10 for CXMATIC33

Stainless Steel Screw M 6x30 for CXMATIC33

Special Fixed End Screw M6x17 for CXMATIC33

Screw for Carriage Index M8x25 for CXMATIC33

V8048 26127 Stud C for CXMATIC33 V602115 37056

V8052 37034

V8056 37041

V8099 37055

Stainless Steel Screw M6x25 for CXMATIC33

Stainless Steel Screw M8x4 U5931 for CXMATIC33

Stainless Steel Screw M8x20 for CXMATIC33

Stainless Steel Screw M8x60 U5931 for CXMATIC33

Stainless Steel Screw M 5x8 U5931 for CXMATIC33

V8130 77630

V620615 37077

V625315 37085 Screw 8x25 for CXMATIC33 V705616

V625815

V634015

Stainless Steel Screw TCEI U5931 M4x12 for CXMATIC33

Stainless Steel Screw M6x12 U5931 for CXMATIC33

Screw TSP U6109 M4x6 INOX for CXMATIC33

V634415

V634515

V700615

Page 25

Model MS-IT-0330-N 39477

Electrical Schematics

Position Description Position Description Position Description

18 Printed Circuit Board 27 Blade Stop Push Button 39 LED Power Supply

19 Power Cord 28 Blade Start Push Button 45 Blade Motor

22 Fan 29 Carriage Stop Push Button 46 Capacitor 20uF

23 Resistance 50W 30 Carriage Start Push Button 48 LED Blade Start

24 Capacitor 35uF 31 Carriage Microswitch 49 LED Product Holder Start

25 Carriage Motor 32 Blade Cover Contact

26 Hall Effect Switch 34 Carriage Stroke Adjustment

Page 26

Notes

________________________________________________________________________________________

Page 27

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

www.omcan.com/warrantyregistration.html

For mailing in Canada

Pour postale au Canada

Por correo en Canadá

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

For mailing in the US

Pour diffusion aux États-Unis

Por correo en los EE.UU.

OMCAN

Niagara Falls, New York

USA, 14305

or email to: service@omcan.com



Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Page 28

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 3,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 3,500 productos con origen a nivel mundial.

Omcan 39477 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual