Omcan 11003, 11012, 11016 Instruction Manual

Meat Grinders

Items 11003, 11012, 11016

Instruction Manual

Revised - 02/03/2017

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

Table of Contents

Item 11003 / Item 11012 / Item 11016

Section

General Information

Safety and Warranty

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 5

Technical Specications

Installation

Maintenance

Parts Breakdown

-------------------------------------------------------------------------------------------- 6

----------------------------------------------------------------------------------------- 6

------------------------------------------------------------------------------- 7 - 9

Page

-------------------------------------------------------------------------- 5

Notes

Warranty Registration

------------------------------------------------------------------------------------------------ 10

---------------------------------------------------------------------------- 11

2

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

3

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

WARNINGS AND PRECAUTIONS

1. Close supervision is necessary when any grinder is used near children.

2. Do not grind hard foods such as bones and nuts.

3. Do not disassemble the grinder or place anything (especially nger, spoon, fork, etc.) in the grinder during operation.

4. Avoid contact with moving parts. Never feed food by hand. Always use food pusher.

4

Safety and Warranty

5. Always be as thorough as possible when cleaning and sanitizing components. Any part exposed to raw meat may harbor or develop bacteria causes illness or death.

6. When cleaning with sanitizers, always follow the manufacturer’s recommendations. Never use products that cause exposed surfaces to render meat unsafe for consumption. Failure to follow this warning may lead to sickness or death!

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see www.omcan.com/warranty.html for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specications

Item Number 11003 11012 11016

Description

Machine Plate Size 3/16” (4.8mm) / 3/8” (9.5mm)

Stainless Steel Hand

Grinder # 10

Stainless Steel Hand

Grinder # 22

Stainless Steel Hand

Grinder # 32

5

Installation

ASSEMBLY

1. Your new manual grinder comes partially assembled and ready for use. However, you need to complete a few steps to be ready to begin use.

2. Attach handle to grinder Body by inserting Wing screw through Handle frame and into rear of grinder body. Turn wing nut until tight.

3. Meat auger slides into grinder body and seats into auger bushing.

4. Knife seats onto Square shaft on front of meat auger.

5. Medium or ne grinder plates seat in front of knife onto same square shaft.

6. Hand wheel threads onto front of grinder body and is tightened down to secure unit.

7. Stufng tubes attach to the grinder by removing hand wheel and threading chosen tube through the hand wheel and then re-tightening the hand wheel onto the grinder body.

Maintenance

CLEANING & SANITATION

Cleaning and sanitization are critical to healthy use of the sausage stuffer. Promptly after each use, disassemble and wash all the components in a sanitizing agent. Rinse with hot water.

REFERENCE

Item Number Model Number Description Manufacturer Model Number

11003 -

11012 - Meat Grinder Manual #22 Stainless Steel 22HSS 11016 - Meat Grinder Manual #32 Stainless Steel 32HSS

Meat Grinder Manual #10 Stainless Steel

with Clamp

10HSS

6

Item 11003

Parts Breakdown

7

Parts Breakdown

Item 11012 Item 11016

8

Parts Breakdown

Item 11003

Item No. Description Position Item No. Description Position Item No. Description Position

41075 Hand Wheel for 10HSS 1 39511 Auger Bushing for 10HSS 7 74432 Stufng Tube (1/2 Inches) for 10HSS 15

74421

74422 Grinder Plateφ3/16 Inches for 10HSS 3 74426 Handle Frame Assembly for 10HSS 9, 11-12 74434 Stufng Tube (3/4 Inches) for 10HSS 17

74423 Knife for 10HSS 4 74427 Wing Screw for 10HSS 10 74435 Stufng Tube Base for 10HSS 18

74424 Square Shaft for 10HSS 5 74430 Washer for 10HSS 13

74425 Meat Auger for 10HSS 6 74431 Big Eye Screw for 10HSS 14

Item 11012

Item No. Description Position Item No. Description Position Item No. Description Position

74436 Hand Wheel for 22HSS 1 74440 Meat Auger for 22HSS 6 74446 Stufng Tube (1/2 Inches) for 22HSS 13

31872

74437 Grinder Plateφ3/16 Inches for 22HSS 3 74441 Body for 22HSS 8 74448 Stufng Tube (3/4 Inches) for 22HSS 15

74438 Knife for 22HSS 4 74442 Handle Frame for 22HSS 9, 11-12 74449 Stufng Tube Base for 22HSS 16

74439 Square Shaft for 22HSS 5 74443 Wing Screw for 22HSS 10

Grinder Plateφ3/8 Inches (Selective)

for 10HSS

Grinder Plateφ3/8 Inches (Selective)

for 22HSS

2 41076 Body for 10HSS 8 74433 Stufng Tube (11/16 Inches) for 10HSS 16

2 31871 Bushing for 22HSS 7 74447 Stufng Tube (11/16 Inches) for 22HSS 14

Item 11016

Item No. Description Position Item No. Description Position Item No. Description Position

74450 Hand Wheel for 32HSS 1 74454 Meat Auger for 32HSS 6 74460 Stufng Tube (1/2 Inches) for 32HSS 13

74451

74452 Grinder Plateφ3/16 Inches for 32HSS 3 74455 Body for 32HSS 8 74462 Stufng Tube (3/4 Inches) for 32HSS 15

74453 Knife for 32HSS 4 74456 Handle Frame for 32HSS 9, 11-12 74463 Stufng Tube Base for 32HSS 16

31821 Square Shaft for 32HSS 5 74457 Wing Screw for 32HSS 10

Grinder Plateφ3/8 Inches (Selective)

for 32HSS

2 31820 Bushing for 32HSS 7 74461 Stufng Tube (11/16 Inches) for 32HSS 14

9

Notes

________________________________________________________________________________________

10

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

www.omcan.com/warrantyregistration.html

For mailing in Canada

Pour postale au Canada

Por correo en Canadá

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

For mailing in the US

Pour diffusion aux États-Unis

Por correo en los EE.UU.

OMCAN

Niagara Falls, New York

USA, 14305

or email to: service@omcan.com



Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

11

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales and service representatives who provide convenient access to over 3,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 3,500 productos con origen a nivel mundial.

Omcan 11003, 11012, 11016 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual