OMAX Laser Feature Finder Kit User Manual

PRECISION ABRASIVE WATERJET ACCESSORIES

Accessory Specifications

Laser Feature
Finder

Standard Features

• Easily attachable to all OMAX

JetMachining® Centers

• Includes a polarized lens to adjust

the diameter of the laser dot to focus
on any size material feature

• With its simple design, the accessory

operates on three A76 batteries,
eliminating wiring or cabling

Benefits

• Easy to use

• Assists in finding tiny details on your

material stock

• Promotes the ability to get the best

yield out of materials

Note: This accessory is not for use
during cutting operations. It does not
replace the Precision Optical Locator.

OMAX® Laser Feature Finder Kit

Perform simple dry runs with this laser attached
to the nozzle before you cut parts on valuable
stock.

Get a rough visual reference of where your jet
stream will begin cutting by locating material
features without special software. The accessory
projects a laser dot within ±0.020" of the area
you plan to cut. The laser also gives you the
capability to easily locate features when your
material is positioned at an angle.

Laser Feature Finder

About OMAX

OMAX has the industry leading patented
abrasivejet controller with a built-in expert
system. Our exclusive “Compute First­Move Later” motion control system
automates most programming and tool
setup work, virtually eliminating the need
for extensive operator training. Plus,
with free OMAX Intelli-MAX® Software
upgrades for the life of the machine and
our ongoing commitment to advance the
efficiency of our technology and software,
OMAX saves you time and money.

The OMAX Technology
Guarantee entitles you, as
the original owner, to free
OMAX software upgrades
for the life of the machine.

OMAX Corporation

21409 72nd Ave South, Kent, WA 98032
253-872-2300 tel [phone] fax
1-800-838-0343 toll-free

WWW.OMAX.COM website

Printed in the U.S.A © October 2010 All rights reserved. S-0051