OMAX Chiller Systems User Manual
Accessory Specifications
PRECISION ABRASIVE WATERJET ACCESSORIES
CHILLER
Standard Features
• 12,000 BTU/hr Chillers are available
in 3 phase 460 VAC (4 amps)
• 24,000 BTU/hr Chillers are available
in 3 phase 460 VAC (7 amps)
• 36,000 BTU/hr Chillers are available
in 3 phase 230/380/460 VAC
(18/9/9 amps)
• Designed for 50° F to 125° F ambient
temperature (10° C to 52° C)
• All wet-end components are made
from non-ferrous material
• All connecting hardware supplied
by OMAX
• Digital temperature readout
• Refrigerant Type: R-22
Benefits
• Control the inlet water temperature
entering your pump equipment
• Improve your pump’s seal life
• Reduce pump rebuilds and machine
downtime
OMAX® Chiller Systems
Improve performance with the OMAX Chiller.
In the event that water temperature exceeds 60°F
on a seasonal or regular basis, shortened pump
seal life can occur. The Chiller cools water
supply for the pump which improves seal life.
Depending on the rating of the Chiller and
ambient conditions, the water temperature can
be lowered by 20° F to 40° F (11° C to 22° C).
Water from the OMAX system’s charge pump is
sent through the Chiller and returns to the pump.
Requirements
• Inlet water fed to the OMAX pump is
required to be 60° F (16° C). If inlet
water temperature is above 60° F,
a Chiller will cool the water for the
pump.
A portion of the water is recirculated to the
waterjet’s internal charge tank to minimize usage.
Chiller
Connect and follow OMAX for the latest news
in waterjet technology.
OMAX Chiller
Water
Hookup
Chiller
Unit
13'–3" (4.04 m)
Drain
Hookup
600 lb
Bulk
Abrasive
Hopper
Weir
Tank
OMAX
Pump
6'–3" (1.91 m)
Electrical
Hookup
1'– 0" (0.30 m)
Footprints
12,000 BTU: L/W/H: 25.5" x 42" x 47" (648 mm x 1,067 mm x 1,194 mm)
Weight: 325 lbs (147 kg)
24,000 BTU: L/W/H: 25.5" x 42" x 47" (648 mm x 1,067 mm x 1,194 mm)
Weight: 350 lbs (159 kg)
36,000 BTU: L/W/H: 50" x 28" x 43" (1,270 mm x 711 mm x 1,092 mm)
Weight: 800 lbs (363 kg)
Electrical Requirements
12,000 BTU: 3 phase 460 VAC (4 amps)
24,000 BTU: 3 phase 460 VAC (7 amps)
36,000 BTU: 3 phase 230/380/460 VAC (18/9/9 amps)
Air
Hookup
Solids
Removal
System
4'– 3" (1.29 m)
About OMAX
OMAX has the industry leading patented
abrasivejet controller with a built-in
expert system. Our exclusive “Compute
First-Move Later” motion control system
automates most programming and tool
setup work, virtually eliminating the need
for extensive operator training. Plus,
with free OMAX Intelli-MAX® Software
upgrades for the life of the machine and
our ongoing commitment to advance the
efficiency of our technology and software, OMAX saves you time and money.
For information on what other OMAX
products and accessories can do for you,
call us today at 800-838-0343 or visit
our website at www.omax.com.
Note: Specifications subject to change without notice.
OMAX Corporation
21409 72nd Ave South, Kent, WA 98032
253-872-2300 tel 253-872-6190 fax
1-800-838-0343 toll-free
WWW.OMAX.COM website
Printed in the U.S.A © February 2011 All rights reserved. S-0024
Loading...