OMAX 5555 User Manual

PRECISION ABRASIVE WATERJET SYSTEMS

OMAX 5555 JetMachining Center

5555

The fast, efcient, and precise 5555 JetMachining® Center provides top performance in waterjet machining of complex parts from
many materials. From simple metals to complex composites, the 4’ 7” square cutting area of the proven 5555 is ideal for rapid
prototyping and just-in-time manufacturing of small to medium-sized parts. With simple xturing and easy access to the cutting
table, setup times are signicantly reduced, increasing productivity and protability.

FEATURES BENEFITS

• Fastest cutting speeds and best precision compared to any abrasivejet in

the industry and is backed by our exclusive Intelli-MAX® Software with real
world cutting data

• Programmable Motorized Z-Axis with a precision OMAX MAXJET®5i Nozzle

Assembly can boost cutting productivity and process efciency

• Tilt-A-Jet® taper compensating abrasivejet cutting head

(available as an option)

• Precision X-Y Axis rigidly mounted to the cutting table

• Pre-loaded linear bearings and precision ball screws

• Low maintenance, high reliability scissor-style hard plumbing

• Drive system sealed against water, dirt, and grit

• Easy operator access to the work area

• High efciency Generation 4 EnduroMAX® pump systems available in 30,

40, or 50 hp with operating efciencies up to 90%

• Robust and accurate design for tight tolerance cutting and reliable operation

• Rapid Water Level Control for quiet and clean submerged cutting

• Bulk Abrasive Delivery System transports garnet from the assembly’s large

hopper into the Zero Downtime Hopper located on the Z-Axis

• Optional Variable Speed Solids Removal System (VS-SRS) designed for

tough industrial use increases uptime through automated solids removal

• Shipped as a completely pre-assembled and factory-tested system

• Machines a wide range of materials and thicknesses, from metals to glass

• Does not create heat-affected zones or mechanical stresses

• No tool changes and minimal xturing reduces setup by 50% or more

• No additional water required for pump cooling

• Small, efcient footprint for minimal oorspace utilization

• Leaves behind a satin-smooth edge, reducing secondary operations

• No noxious gases, liquid and oils used in, or caused by, the machining process

• EnduroMAX pump technology delivers the highest nozzle horsepower in the

industry for faster and more efcient cutting

• Completes most work below 80 dBA

• Environmentally “green” system with quiet and clean operation with low

electrical consumption

• Highly robust and reliable pump design capable of over 1000 hours

between maintenance

Made in the USAWWW.OMAX.COM

5555

MACHINE DIMENSIONS

Footprint (with controller)

Weight (tank empty) 6,291 lb (2,854 kg)

Height (with scissor plumbing) 9’ 10” (2,998 mm)

Operating Weight 13,000 lb (5,897 kg)

10’ 11” x 7’ 11”
(3,327 mm x 2,413 mm)

WORK ENVELOPE

X-Y Cutting Travel*

Z-Axis Travel (with Motorized Z Axis)* 8” (203 mm)

Table Size

4’ 7” x 4’ 7”
(1,397 mm x 1,397 mm)

6’ 8” x 5’ 5”
(2,032 mm x 1,650 mm)

DRIVE DESCRIPTION

• Closed loop, digital drives

• Brushless servo motors

• Pre-loaded ball screws, recirculating

ball bearings

• Linear bearings with hardened,

precision ground ways

Cantilever Y-axis on bridge

•

X-axis

STANDARD MODEL SPECIFICATIONS

Material Support Slats 4" x 1/8" Galvanized Steel

Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter)

Electrical Requirements

Noise Level

Speed 180 in/min (4,572 mm/min)

Accuracy of Motion at 70˚ F

3-Phase, 380-480 VAC ±10%,
50-60 Hz

Below 80 dBA at one meter for
submerged cutting

Ballbar Circularity
(Over 12”)

Repeatability

±0.003”
(±0.076 mm)

±0.002”
(±0.051 mm)

OPTIONAL ACCESSORIES

• Tilt-A-Jet Cutting Head for taper

compensation

• Variable Speed SRS (VS-SRS)

• Collision Sensing Terrain Follower

• OMAX Drill Head

• Precision Optical Locator (POL)

• Rotary Axis

• Water-only MAXJET 5 for cutting soft

materials

• OMAX Mini MAXJET 5i Nozzle

Assembly

• Manual Tilt Z

• Laminar Filter

• Waterjet Brick Kit

• Catcher Tank Armor Plating

• Material Holding Kit

• Laser Feature Finder

The OMAX Technology Guarantee
entitles you, as the original owner, to
free OMAX software upgrades for the
life of the machine.

Specications subject to change without notice.
600037B January 2014

*Optional accessories may reduce travel. Photos may show optional
accessories. For a complete list of accessories, contact an OMAX sales
representative. Pumps are built to meet UL and CE specications. Contact
OMAX for detailed utility requirements.

ABOUT OMAX

OMAX is the global total solutions provider in advanced abrasive waterjet
systems. Our intuitive Intelli-MAX Software Suite simplies programming and
reduces setup times, increasing your productivity. OMAX engineers continue
to innovate technology for waterjet machining, from proven 4th generation
pump designs to cutting edge drive systems with micron-level accuracy. With
the largest abrasive waterjet support network in the world, OMAX continues to
shape the future of waterjets.

To see how an OMAX JetMachining Center can save you time and money, call
or visit our website and request a free part analysis today.

WWW.OMAX.COM

Made in the USA

OMAX CORPORATION

21409 72nd Avenue South

Kent, WA 98032

TEL [phone]

FAX [phone]