Olympus 76, Infinity 76, Infinity Zoom 76 Instructions Manual
INSTRUCTIONS
Table of contents
Description of controls
..................................................
3
Before you begin
Loading the batteries ............................................. 6
Checking the batteries .......................................... 7
Attaching the strap
.................................................
8
Loading the film
....................................................
9
Unloading
the
film ................................................
12
Simple point & shoot photography
How to take pictures
...........................................
14
Auto flash photography
(1)Taking pictures in low light
............................
20
(2)Taking backlit subjects
....................................
23
Advanced shooting techniques
Macro photography
............................................
24
Focus lock
............................................................
25
Selftimer
...............................................................
28
Continuous mode ................................................. 30
Auto-zoom mode .................................................. 31
Pre-focus mode .................................................... 33
AUTO-S flash photography
...................................
35
Flash OFF ............................................................. 37
FILL-IN flash ........................................................ 38
MULTI flash ......................................................... 39
Night scene flash photography
................................
41
How to use the soft case (optional)
...............................
43
Care and storage
.........................................................
44
Questions and answers
...............................................
46
Specifications
.............................................................
47
1
Thank you for purchasing the OLYMPUS Infinity Zoom 76. Please read th is instruction manual carefully before
using the camera. This camera wil l not operate unless the batteries are loaded and th e power switch is set to ON.
Before taking important pictures, it is recommended that you shoot a roll of fi lm j ust to familiarize yourself wi th the
camera's features.
Symbols used in this manual
2
Correct
Incorrect
Operation
Order
Operation order
Automatic operation
Attention
Operation sound
Lamp on
Lamp blinking
Press lightly
Description of controls
LCD panel
Light sensor
Viewfinder
Shutter release b u t t o n
Autofocus windows
Steady grip
Power switch
Zoom buttons
Strap eyelet
Lens
Flash reflector
Flash mode button
Subject button
Selftimer indicator
3
Back cover
Film window
Tripod socket
Viewfinder
Battery compartment cover
Back cover release
Rewind button
4
Viewfinder display
LCD panel
Close-up
correction marks
Autofocus frame
AF indicator (green)
Flash indicator (orange)
Selftimer
Continuous mode
Auto-zoom
Pre-focus
Battery check
indicator
Exposure counter
Flash mode selection indicator
Flash mode indicator
5
Insert a coin i nto the groove of th e
battery cover on the side of the grip
and open the cover.
Insert two 3V lithium batteries as
shown and replace the cover.
Use Panasonic CR123A, Duracell
DL123A, or equivalent.
* Do not mix different types of batteries or
new and old batteries at t he same time.
* Remov e batteries if yo u do not plan to use
the camera for an extended period of time
(more than a year).
Before you
begin···
Loading the
batteries
6
Set the power switch to ON to check
the batteries. The battery check
indicator will be displayed for 12
seconds.
When is displayed, batteries are
OK.
If flashes, batteries are low,
have spares handy.
If is displayed continuously,
batteries should be replaced
immediately.
* When the battery power is low, the
flash will take longer to recharge.
* Before replacing the batteries, set
the power switch to OFF.
Checking the
batteries
7
Attaching the
strap
8
Open the back cover by sliding the
back cover release toward the top of
the camera.
Insert the film cartridge into the
camera. Always avoid direct sunlight
when loading the film.
Loading t he film
This camera is designed to
use DX-coded 35mm film.
DX coding, used by
virtually all major film
manufacturers, allows the
camera to identify and set
the film speed automatically. If DX-coded film is
unavailable, use ISO 100
film.
9
Make sure the film lies flat.
Align the film leader with the red
film loading indicator.
Unless the film leader matches the
film loading indicator, the film may
not be loaded.
* Do not touch the lens inside the
body with your fingers or the film
leader.
10
Close t he ba ck cover. The film
automatically advances to the first
frame.
Set the power switch to ON to make
sure that the exposure counter shows
"1".
If film is improperly loaded, the LCD
panel will display a blinking "E". In
this case, open the back cover, and
realign the film leader.
Use the window in the camera back
to check type of film loaded.
11
The camera automatically rewinds
the film when you reach the end of a
roll. The exposure counter on the LCD
panel counts down as the film is
rewinding.
* The final reading of the exposure counter
before rewinding may be more than the
number of exposures specified for the film.
If you want to rewind the film before
the end of the roll, press the rewind
button with the tip of a ballpoint pen.
Do not use any device wi th a sharp
tip.
Unloading the film
12
Once the film has been rewound, a
blinking "E" will be displayed on the
LCD panel. Further operations are not
possible until the rewound film
cartridge is removed.
Open the back cover, and remove
the film cartridge from the camera.
Avoid direct sunlight when removing
the film.
13
"Rewinding completed" indicator
When the
power switch
is OFF, there
will be no
indication on the LCD panel.
When the
power switch
is ON
Set the power switch to ON.
* When the c ame ra is not in us e,
always set the power switch to OFF
so that the shutter cannot be
activated accidentally.
While looking through the
viewfinder, aim the camera at y our
subject.
Simple point &
shoot
photography
H ow to take pictures
When t h e power switch is O N ,
the LCD panel lights.
The LCD panel goes out after 4 to
5 minutes to minimize battery
drain. The lens will then zoom to
the wide-angle position. After 4
hours the power is automatically
turned to OFF. To resume
operation, set the power swi tch
to OFF and then to ON again.
14
Loading...